This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Interior Department | 43 CFR 11.33(a) | DOI NRDAM/GLE | 1999 | The CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments Technical Documentation, Volumes I-IV, dated April 1996, including Revision I dated October 1997, and Revision II dated December 1999 | U.S. Department of the Interior | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (93) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xxviii) | APHA Method 3500-Pb | 1997 | Lead | American Public Health Association | |
Environmental Protection Agency | 40 CFR 763 Appendix E 2.10(17) | NBS Special Publication 506 | 1977 | Selection and Characterization of Fibrous and Nonfibrous Amphiboles for Analytical Methods Development, pp. 295-312, in: Proceedings of Workshop on Asbestos: Definitions and Measurement Methods | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 60.107a(d)(4)(ii) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (62) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Atrazine) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 261.1035(b)(4)(iii) | EPA-450-2-81-005 | 1981 | Air Pollution Training Institute Course 415: Control of Gaseous Emissions | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 3.3.4.1 | 40 CFR 50 Appendix Q | 2015 | Reference Method for the Determination of Lead in Particulate Matter as PM10 Collected From Ambient Air | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(7)(i) | APHA Method 4500-ClO2 D | 1995 | Chlorine Dioxide, (Reserved) | American Public Health Association | |
Environmental Protection Agency | 40 CFR 91.120(c)(3)(iii) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Energy Department | 10 CFR 434.402.1.2.2 | ASTM C 976 | 1990 | Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (RS-8) | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IA | APHA Method 9222 D | 1997 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 272.1801(a)(1) | OHHWMP | 1990 | State of Ohio Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Ohio | |
Environmental Protection Agency | 40 CFR 238.30(a) | ASTM D 3826 | 1991 | Standard Practice for Determining Degradation End Point in Degradable Polyolefins Using a Tensile Test | ASTM International | |
Mine Safety and Health Administration | 30 CFR 75.818(b)(4) | ASTM F 496 | 1997 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.15(a) | Drawing No. SA 103C 041 | 1976 | Upper Arm Assembly Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.70-10(a)(1)(ii) | ASME B16.25 | 2003 | Buttwelding Ends | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1)(vi) | Drawing No. 880105-560-2 | 2000 | Complete Leg Assembly, Right | Reprographic Technologies | |
Coast Guard | 33 CFR 183.5(b) | IEEE 45 | 1983 | Recommended Practice for Electrical Installations on Shipboard—Cable Construction | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 60.704(d)(2)(ii) | ASTM D 1946 | 1977 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 184.1229(b) | Food Chemicals Codex | 1981 | Calcium Stearate | National Academy Press | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(6)(i) | EPA-600-4-79-020 | 1983 | Method 220.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.156-7(b)(3)(ii) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footote 22 | EPA Method 1603 | 2009 | Escherichia coli (E. coli) in Water by Membrane Filtration Using Modified membrane-Thermotolerant Escherichia coli Agar (Modified mTEC) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table | IDEXX Colisure Test | 1994 | Detect coliforms/E. coli with the convenience of a long-read window | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 80.1416(f)(7)(v)(A) | ASTM E 870 | 2013 | Standard Test Methods for Analysis of Wood Fuels | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(4) | SAE J-211/2 | 1995 | Instrumentation for Impact Tests—Part 2—Photographic Instrumentation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (1,4-Dichlorobenzene) | EPA Method 502.2 | 1995 | Volatile Organic Compounds (Drinking Water) by GC/PID/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant resin (2) | UL 1316 | 2012 | Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.261(f)(5) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 2622 | 2007 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(9) | ASTM A 178/A 178M | 1995 | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.946(a)(1)(iv) | ASTM C 1186 | 1991 | Standard Specification for Flat Non-Asbestos Fiber Cement Sheets | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.943(c) | NIST PS 20 | 1994 | American Softwood Lumber Standard | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 95 percent eye range contour | SAE J-941 | 1965 | Passenger Car Driver's Eye Range | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.903(a)(5) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.664(e)(2)(ii) | ASTM D 1946 | 1994 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(72) | ANSI Z88.2 | 1969 | Practices for Respiratory Protection | American National Standards Institute | |
Coast Guard | 46 CFR 154.170(a) | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Interior Department | 43 CFR 11.41(d) | DOI NRDAM/CME | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 49 CFR 178.360-4(a)(2) | AWWA C 207 | 1955 | Steel Pipe Flanges | American Water Works Association | |
Rural Utilities Service | 7 CFR 1728.201(h)(2)(ii) | AWPA A2 | 2008 | Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 94.211(k) | Annex VI of MARPOL 73/78 | 1997 | Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines | International Maritime Organization | |
Food and Drug Administration | 21 CFR 184.1446(b) | Food Chemicals Codex | 1981 | Manganese Chloride | National Academy Press | |
Federal Railroad Administration | 49 CFR 227 Appendix B II | ANSI S12.6 | 2002 | Methods for Measuring the Real-Ear Attenuation of Hearing Protectors | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (8) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(lviii) | ASTM D 5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5089(h)(1)(i) | ASTM E 324 | 1999 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5220(b)(4)(v) | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International |