This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 16 | Quanti-Tray® Method | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 5, (3)(e) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Federal Communications Commission | 47 CFR 87.199(a) | RTCA DO-204 | 1989 | Minimum Operational Performance Standards 406 MHz Emergency Locator Transmitters (ELT) | Radio Technical Commission for Aeronautics | |
Coast Guard | 46 CFR 95.01-2(c)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Energy Department | 10 CFR 431.15(b)(1)(i) | NEMA MG-1 | 1993 | Motors and Generators, Section I, Part 1 | National Electrical Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11114-1 | 1997 | Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 147.650(a)(5) | IDUIC regulations | 1977 | Department of Water Resources-Water Resources Board, Title 42, Chapter 17, Idaho Code, sections 42-1701, 42-1703, 42-1735 (Bobbs-Merrill 1977, section 42-1701A (Supp. 1984) | State of Idaho | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | APHA Method 3500-Cu C | 1999 | Copper by Bathocuproine Method | American Public Health Association | |
Rural Utilities Service | 7 CFR 1755.702(f)(1)(i) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 435.13 Note 5 | EPA Method 1654 | 2015 | PAH Content of Oil by High-Performance Liquid Chromatography with an Ultra-Violet Absorption Detector, Revision A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 76.4(c)(1) | ASME PTC 4.2 | 1991 | Test Code for Coal Pulverizers | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.926d(c)(4)(iv)(A)(3) | 44 CFR 60 | 2013 | National Flood Insurance Program | Federal Emergency Management Agency | |
Coast Guard | 46 CFR 58.50-5(a)(4) Table 58.50-5(a) | ASTM B 122/B 122M | 1995 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.3 | ASTM F 1292 | 1999 | Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.272 Appendix B | ANSI/NFPA 61D | 2014 | Facilities handling agricultural commodities for human consumption | National Fire Protection Association | |
Coast Guard | 46 CFR 114.600(b) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 Feet) in Length | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.35(b)(2)(i) | Drawing No. 78051-47 | 1987 | Upper leg assembly, right | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (67) | APHA Method 6640 B | 2001 | Chlorinated Phenoxy Herbicides by Liquid-Liquid and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.1.6 | EPA-520-1-89-009 | 1989 | Indoor Radon and Radon Decay Product Measurement Protocols | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | APA E30-P | 1996 | APA Design/Construction Guide, Residential and Commercial | APA--The Engineered Wood Association | |
Minerals Management Service | 30 CFR 250.1628(d)(2) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 701.3(c)(2)(iv) | Food Chemicals Codex | 1975 | Food Chemicals Codex, Second Supplement | National Academy Press | |
Labor Department | 41 CFR 50-204.65 | 49 CFR 178 | 2012 | Specifications for Packagings | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (75) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.74(a) | APHA Standard Methods | 1994 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(75) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.125(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(vi) | AOCS Method Ca 5a-40 | 1989 | Free Fatty Acids | American Oil Chemists Society | |
Environmental Protection Agency | 40 CFR 160.151-57 | OIA Method PAI-DK01 | 1994 | Nitrogen Kjeldahl, (Block Digestion, Steam Distillation, Tritrimetric Detection) | OI Analytical | |
Environmental Protection Agency | 40 CFR 264.1033(e)(2) | ASTM D 1946 | 1982 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 98.324(e)(3) | ASME MFC-6M | 1998 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 58.03-1(g)(9) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 F | 1992 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Federal Trade Commission | 16 CFR 305.5(c)(1) | ASME A112.18.1M | 1989 | Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
Coast Guard | 27 CFR 21.65(a) | The United States Pharmacopoeia | 1980 | Formula No. 38-B | U.S. Pharmacopeial Convention | |
Research and Special Programs Administration | 49 CFR 193.2301 | NFPA 59A | 2001 | Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Coast Guard | 46 CFR 182.440(d) | ABYC H-24 | 1993 | Gasoline Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.17(g)(168) | ASTM D 5287 | 1997 | Standard Practice for Automatic Sampling of Gaseous Fuels | ASTM International | |
Food and Drug Administration | 21 CFR 172.882(a) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 33 CFR 164.74(a)(3)(i) | CIA 3 | 1980 | Standard Test Methods for Fiber Rope Including Standard Terminations | Cordage Institute | |
Research and Special Programs Administration | 49 CFR 173.302b(b) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Coast Guard | 46 CFR 56.30-20(d) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/Mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 445.2(m) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.364(e)(3) | ASME MFC-6M | 1998 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 761.75(b)(8)(iii) | ASTM D 93 | 1990 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 160.151-27(c)(2) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.710 Table 2 | ASTM D 2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(xv) | EPA Method 1682 | 2006 | Salmonella in Sewage Sludge (Biosolids) by Modified Semisolid Rappaport-Vassiliadis (MSRV) Medium. EPA 821-R-06-014 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.772(h)(5)(v) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers |