This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Oceanic and Atmospheric Administration | 50 CFR 226.210 | USGS Publication | 1974 | 1:500,000 Scale Hydrologic Unit Maps for the State of Oregon | U.S. Geological Survey | |
Rural Utilities Service | 7 CFR 1755.506(s) | 7 CFR 1755.510 | 2012 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 572.161 Table A | Drawing No. 167–3000 | 2009 | Lower Torso Assembly | Leet-Melbrook | |
Coast Guard | 46 CFR 126.170(b) | IMO SOLAS | 1992 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b) | Drawing No. 127-8221 | 1994 | Neck bracket | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 178.3770(d)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Coast Guard | 46 CFR 160.061-1(a)(1) | FedSpec QQ-W-423 | 1969 | Wire, Steel, Corrosion-Resisting | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 94.108(a)(1) Table B-5 | ASTM D 93 | 2009 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Food and Drug Administration | 21 CFR 184.1272(b) | Food Chemicals Codex | 1981 | L-Cysteine Monohydrochloride | National Academy Press | |
Federal Highway Administration | 23 CFR 630.1104 Positive Protection Devices | NCHRP Report 350 | 1993 | Recommended Procedures for the Safety Performance Evaluation of Highway Features | National Research Council, Transportation Research Board | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (111) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footnote 9 | ASTM Annual Book of Standards | 1996 | Water and Environmental Technology, Section 11.02 | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(1)(xiii) | ISO 9408:1999(E) | 1999 | Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium by Determination of Oxygen Demand in a Closed Respirometer. Second Edition | International Organization for Standardization | |
Consumer Product Safety Commission | 16 CFR 1615.4(g)(4)(i) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1200 | 1993 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Heptachlor) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 268.40, Treatment Standard Table Footnote 7 | EPA SW-846 | 2015 | Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75.6(a)(2) | ASTM D 240 | 2000 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S9.3.5 | SAE J-941b | 1969 | Motor Vehicle Driver's Eye Range | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-1, 8.1(3)(ii) | ASTM D 6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.61(d)(4) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Coast Guard | 46 CFR 25.45-2(b)(2) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 63.3951(c) | ASTM D 5965 | 2002 | Standard Test Method for Specific Gravity of Coating Powders | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(42) | API MPMS | 2009 | Chapter 14.5/GPA Standard 2172-09 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 143.4(b) Table Note 3 | ASTM Annual Book of Standards | 1996 | Water and Environmental Technology--Section 11, Vols. 11.01 and 11.02 | ASTM International | |
Education Department | 34 CFR 75.616(b)(3) | ASHRAE 90C | 1977 | Energy Conservation in New Building Design | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.315(i)(12) | CGA S-1.2 | 1980 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Coast Guard | 46 CFR 193.01-3(c)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.335(b)(9)(i) | ASTM D 6366 | 1999 | Standard Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Food and Drug Administration | 21 CFR 184.1736(b) | Food Chemicals Codex | 1981 | Sodium Bicarbonate | National Academy Press | |
Housing and Urban Development Department | 24 CFR 200.955(a)(1) | AAMA/NWWDA 101/I.S. 2 | 1997 | Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors | American Architectural Manufacturers Association | |
Minerals Management Service | 30 CFR 250.1708(a)(1) | API RP 53 | 1997 | Recommended Practices for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Energy Department | 10 CFR 430 Subpart B, App. B1, 2.2 | AHAM HRF-1 | 1979 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 160.171-17-9(b) | Federal Standard 751A | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | ASTM D 3557B | 2002 | Cadmium in Water Atomic Absorption | ASTM International | |
Environmental Protection Agency | 40 CFR 141.852(c)(1)(i)(D) | APHA Method 9222 | 1998 | Membrane Filter Technique for Members of the Coliform Group, C, Delayed-Incubation Total Coliform Procedure | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(f) | ASTM D 6722 | 2001 | Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by the Direct Combustion Analysis | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-45 | 2003 | Bypass and Drain Connection Standard | Manufacturers Standardization Society of the Valve and Fittings Industry | |
National Highway Traffic Safety Administration | 49 CFR 572.146(g) | Part No. 210-0000 | 2001 | Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Atrazine) | EPA Method 551.1 | 1995 | Determination of Chlorination Disinfection Byproducts, Chlorinated Solvents, and Halogenated Pesticides/Herbicides in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart DDDD, Table 7, Mercury | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1222.2 (a) | ASTM F2906 | 2013 | Standard Consumer Safety Specification for Hand-Held Infant Carriers | ASTM International | |
Coast Guard | 46 CFR 164.023-5 Table 164.023-5(a) | MIL-T-43548C | 1986 | Thread, Polyester Core: Cotton-, Rayon-, or Polyester-Covered | U.S. Department of Defense | |
Rural Utilities Service | 7 CFR 1755.902(c)(3) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Public Health Service | 42 CFR 52b.12(c)(7)(iv) | NFPA 101 | 1997 | Life Safety Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 89.327 | SAE J-1937 | 1989 | Recommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(a)(7) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.2 | ASTM D 4809 | 2000 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-21 | ANSI Z21.47 | 1993 | Gas-Fired Central Furnaces (RS-21) | American Gas Association |