This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (30) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Picloram) | EPA Method 515.4 | 2000 | Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Microextraction, Derivitization, and Fast Gas Chromatography with Electron Capture Detection, Revision 1 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ANSI Z133 | 2012 | Safety Requirements for Arboricultural Operations—Pruning, Trimming, Repairing, Maintaining, and Removing Trees, and Cutting Brush | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.17(f)(7) | ASME MFC-9M | 1988 | Measurement of Liquid Flow in Closed Conduits by Weighing Method | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-995a | 1969 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.664(e)(4) | ASTM D1946 | 1990 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 120.410(d) | UL 1574 | 1995 | Track Lighting Systems | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 575.104(f)(1)(ii) | ASTM E501 | 1976 | Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(j)(3) | GPA 2377 | 1986 | Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes | Gas Processors Association | |
Federal Motor Carrier Safety Administration | 49 CFR 393.75(f) | FMVSS 119 | 1998 | New Pneumatic Tires for Vehicles Other Than Passenger Cars | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200.952(a)(2) | ANSI A208.1 | 1979 | Wood Particleboard | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 195.307(b) | API 620 | 1996 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.57(g)(5)(i)(A) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Energy Department | 10 CFR 431.102 | ASTM D2156 | 1980 | Method of Tests for Smoke Density in Flue Gases from Distillate Fuels | ASTM International | |
Coast Guard | 46 CFR 164.120-7(a)(2) | MIL-R-7575C | 1966 | Military Specification, Resin, Polyester, Low-Pressure Laminating | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (34) | ASTM D1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (8) Calcium | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Food and Drug Administration | 21 CFR 176.170(b)(2) | ASTM D1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(10) | EPA-450-3-77-018 | 1977 | Selecting Sites for Monitoring Total Suspended Particulates, Ludwig, F.L., J.H. Kealoha, and E. Shelar | U.S. Environmental Protection Agency | |
Engineers Corps | 33 CFR 222.3(e)(1) | ANSI C2 | 2012 | National Electrical Safety Code | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/NWWDA I.S. 6 | 1986 | Industry Standard for Wood Stile and Rail Doors | National Wood Window and Door Association | |
National Highway Traffic Safety Administration | 49 CFr 572.181 Table A | Drawing No. 175-5000 | 2009 | Abdominal Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(H) | EPA Method 252.2 | 1978 | Osmium, Atomic Absorption, Furnace Technique | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 440 Appendix A | ASTM C612 | 1983 | Block and Board Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 435.15 Note 10 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(6) | ASTM D975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(iv) | API MPMS | 2013 | Chapter 11, Section 1 | American Petroleum Institute | |
Coast Guard | 46 CFR 111.33-5(b) | IEC 92-304 | 1995 | Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors | International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.25-20(d) | ASME B1.1 | 1982 | Unified Inch Screw Threads (UN and UNR Thread Form) | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 173.301(f)(1) | CGA C-12 | 1979 | Qualification Procedure for Acetylene Cylinder Design | Compressed Gas Association | |
Rural Utilities Service | 7 CFR 1755.903(b)(2)(i) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(48) | ASTM D1072 | 1994 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. B1, 1.1 | AHAM HRF-1 | 1979 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 160.077-19(c)(12) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 282.66(d)(1)(i)(A) | KSUSTP | 1994 | Kansas Statutory Requirements Applicable to the Underground Storage Tank Program | State of Kansas | |
Environmental Protection Agency | 40 CFR 272.1751(c)(1) | NDHWMP | 2016 | North Dakota Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of North Dakota | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5335-1A | 1970 | Airport Design Standards--Airports Served by Air Carriers--Taxiways (1970, through change 2, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.45 | NCRP Report No. 105 | 1989 | Radiation Protection for Medical and Allied Health Personnel | National Council on Radiation Protection and Measurement | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (10) | UNECE Regulation 48 | 1996 | Uniform Provisions Concerning the Approval of Vehicles with Regard to the Installation of Lighting and Light-Signaling Devices | United Nations | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (54) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 147.500(b)(2) | FLUIC regulations | 1982 | Florida Administrative Code, Chapter 17-1 (1982) (Administrative Procedures Act) | State of Florida | |
Occupational Safety and Health Administration | 29 CFR 1910.262(c)(6) | ANSI A11.1 | 1965 | Practice for Industrial Lighting | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 1, (2)(b) | ASTM D6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-530B | 1982 | Insulation Board, Thermal, Unfaced, Polyurethane or Polyisocyanurate | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D120 | 2009 | Standard Specification for Rubber Insulating Gloves | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (58) | ASTM D4657 | 1998 | Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water (Withdrawn 2005) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (molybdenum) | APHA Method 3125 | 2014 | Metals by Inductively Coupled Plasma/Mass Spectrometry | American Public Health Association | |
Coast Guard | 46 CFR 154.610(c) | ASTM A20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Environmental Protection Agency | 40 CFR 60.485a(g)(5) | ASTM D2504 | 1988 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 116.423(a)(4) | ASTM E648 | 1997 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International |