This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 430.01(s) | EPA Method 1613 B | 2015 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 163.003-3 | ASTM D 1435 | 1994 | Standard Practice for Outdoor Weathering of Plastics | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(20)(iv)(D) | NFPA 96 | 1970 | Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.902(r)(1) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
National Highway Traffic Safety Administration | 49 CFR 572.120(a)(1)(i) | Drawing No. 127-1000 | 2009 | Drawings and Specifications for the Hybrid III 6-year-old Dummy, Head Assembly | Reprographic Technologies | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a) | ASTM A 1008/A 1008M | 2003 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(2) | EPA Method 1664 | 2015 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, PB99–121949 | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(c) | SAE J-586 | 2000 | Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.506-1 | NFPA 70 | 1968 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 75.6(f)(1) | API MPMS | 1995 | Chapter 3, Section 2 | American Petroleum Institute | |
Coast Guard | 33 CFR 154.106(f)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1703(b) | ANSI/API Spec. 11D1 | 2009 | Packers and Bridge Plugs | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. P, 4.2 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | UL 19 | 1992 | Lined Fire Hose and Hose Assemblies | Underwriters Laboratories, Inc. | |
Coast Guard | 27 CFR 21.6(a) | National Formulary | 1980 | The USP and NF Compendia | U.S. Pharmacopeial Convention | |
National Highway Traffic Safety Administration | 49 CFR 572.36(h) | Drawing No. 78051-46 | 1987 | Upper leg assembly, left | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (43) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 147.2700 | VIUIC regulations | 2014 | State-administered program (Reserved) | Virgin Island Territory | |
Veterans Affairs Department | 38 CFR 51.200(a) | NFPA 101 | 2006 | Life Safety Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1742 | 2011 | Standard Specification for PVC Insulating Sheeting | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(55) | ISO 10417: 2004 | 2004 | Petroleum and natural gas industries—Subsurface safety valve systems—Design, installation, operation and redress | International Organization for Standardization | |
Federal Motor Carrier Safety Administration | 49 CFR 393.104(e)(4) | WRTB Publication | 1985 | Wire Rope Users Manual, 2nd Edition | Wire Rope Technical Board | |
Environmental Protection Agency | 40 CFR 761.19(a)(3) | ASTM D 240 | 1987 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (48) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 2907 | 1997 | Standard Test Methods for Microquantities of Uranium in Water by Fluorometry (Withdrawn) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 4294 | 2002 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(19) | ASME B16.28 | 1994 | Wrought Steel Buttwelding Short Radius Elbows and Returns | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 45 CFR 162.1202(b)(2)(ii) | ASC X12N 270/271 | 2008 | Health Care Eligibility Benefit Inquiry and Response, Version 4010 | Washington Publishing Company | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 306B, Section 6.2 | ASTM D 1331 | 1989 | Standard Test Method for Surface and Interfacial Tension of Solutions of Surface of Active Agents | ASTM International | |
Environmental Protection Agency | 40 CFR 98.364(e)(4) | ASME MFC-7M | 1987 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(79) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 28, Section 6.1 | UL 103 | 1986 | Standard for Chimneys, Factory-built, Residential Type and Building Heating Appliance, Sixth Edition | Underwriters Laboratories, Inc. | |
Rural Utilities Service | 7 CFR 1755.910(e)(6)(ii) | ASTM D 2197 | 1991 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion | ASTM International | |
Environmental Protection Agency | 40 CFR 63.772(h)(6)(iv) | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 155.130(b)(2)(i) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.4 | 1998 | Gray Iron Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(2)(v) | EPA-600-4-91-010 | 1991 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (41) | APHA Method 5220 F | 1997 | Silica gel treated HEM (SGT-HEM): Silica gel treatment and gravimetry | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F E | 1995 | Fluoride by Complexone Method | American Public Health Association | |
Coast Guard | 46 CFR 160.151-57(b)(11) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NAHB Publication | 1979 | Insulation Manual, Homes and Apartments | National Association of Home Builders | |
Energy Department | 10 CFR 431.15(e)(2)(vi) | ISO/IEC Guide 65 | 1993 | General requirements for bodies operating product certification systems | International Organization for Standardization / International Electrotechnical Commission | |
Coast Guard | 45 CFR 162.1203(a)(5) | CAQH Publication | 2011 | Phase I CORE 156: Eligibility and Benefits Real Time Response Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 1043.30(c)(4) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 13 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(T) | EPA Method 644 | 1993 | Picloram | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Interior Department | 43 CFR 11.34(b) | DOI NRDAM/CME | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
Occupational Safety and Health Administration | 29 CFR 1910.179(c)(2) | ANSI A14.3 | 1956 | Safety Requirements for Fixed Ladders | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.390(n)(1) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
National Highway Traffic Safety Administration | 49 CFR 572.43(a) | Drawing No. SA-SID-M001A | 1996 | Completed Assembly Side Impact Dummy, Revision B | Reprographic Technologies |