This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 80 | 2000 | Guide for Safety in AC Substation Grounding | Institute of Electrical and Electronics Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Energy Department | 10 CFR 440 Appendix A | ARI 470 | 1987 | Desuperheater/Water Heaters | Air Conditioning and Refrigeration Institute | |
Mine Safety and Health Administration | 30 CFR 57.6201(a)(2) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Coast Guard | 46 CFR 63.25-9(a) | IMO Resolution MEPC.76(40) | 1997 | Standard Specification for Shipboard Incinerators | International Maritime Organization | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASCE 7 | 1988 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Housing and Urban Development Department | 24 CFR 200.925c(c)(2) | SBCCI Standard Mechanical Code | 1991 | Standard Mechanical Code | Southern Building Code Congress International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(1)(iii) | ISO 2114:2000(E) | 2000 | Plastics (polyester resins) and paints and varnishes (binders)—Determination of partial acid value and total acid value, Third Edition | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 173.73(a) | FDA Publication | 1985 | Determination of Weight Average and Number Average Molecular Weight of Sodium Polyacrylate | Food and Drug Administration, U.S. Department of Health and Human Services | |
Food and Drug Administration | 21 CFR 180.22(b) | FDA Publication | 1995 | Determination of [beta]-Dodecyl-mercaptopropionitrile in NR-16R Aqueous Extracts | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 72.13(a)(1) | ASTM D 388 | 1992 | Standard Classification of Coals by Rank | ASTM International | |
Public Health Service | 42 CFR 37.43 | NCRP Report No. 49 | 1976 | Structural Shielding Design and Evaluation for Medical Use of X-Rays and Gamma-Rays up to 10 MeV | National Council on Radiation Protection and Measurement | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.7 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Coast Guard | 46 CFR 56.01-2(e)(35) | ASTM A 395/A 395M | 1998 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Coast Guard | 46 CFR 160.077-19(c)(15) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 12.03-1(a) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Research and Special Programs Administration | 21 CFR 177.1550(d)(3) | ASTM D 1457 | 1956 | Test for Thermal Instability Index of Tetrafluoroethylene Homopolymer | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(C) | AOAC Method 973.40 | 1998 | Specific conductance of water | AOAC International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(13) | SAE J-1939-31 | 1997 | Network Layer | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.133(c)(2) | Drawing No. 9000018 | 1987 | Jam Nut | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Dinoseb) | EPA Method 615 | 1993 | The Determination of Chlorinated Herbicides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2150 | TNUIC regulations | 2013 | State-administered program (Reserved) | State of Tennessee | |
Environmental Protection Agency | 40 CFR 63.459(b)(5)(iv)(A)(2) | NCASI Method DI/MEOH-94.03 | 2000 | Methanol in Process Liquids and Wastewaters by GC/FID | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Environmental Protection Agency | 40 CFR 91, Subpart D, Appendix A, Table 3 | ASTM D 2700 | 1992 | Standard Test Method for Knock Characteristics of Motor and Aviation Fuels | ASTM International | |
National Archives and Records Administration | 36 CFR 1235.46(b)(3) Table | ISO/IEC 16382 | 2000 | Information Technology--Data Interchange on 12.7 mm 208-track Magnetic Tape Cartridges--DLT 5 Format | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 62.14105(b) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(x) | ASTM A 153 | 1987 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | ASTM International | |
Public Health Service | 42 CFR 84.81(d) | ANSI B57.1 | 1965 | Compressed Gas Cylinder Valve Outlet and Inlet Connections | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(26) | SAE J-826 | 1995 | Devices for Use in Defining and Measuring Vehicle Seating Accommodation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.41 Coal | ASTM D 388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(35) | API MPMS | 2007 | Chapter 11.2.2 | American Petroleum Institute | |
Coast Guard | 46 CFR 56.01-2(d)(27) | ASME B36.19M | 2004 | Stainless Steel Pipe | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(67) | ANSI Z535.2 | 2011 | Environmental and Facility Safety Signs | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.852(a)(5) Table | APHA Method 9221 D | 2005 | Presence-Absence (P-A) Coliform Test | American Public Health Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xxv) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section XI, 2001 Edition and later editions and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.209 S4.1(f) | SAE J-800c | 1973 | Recommended Practice, Motor Vehicle Seat Belt Installations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (10) | ASTM D 5812 | 2002 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(k)(4)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | ASTM D 5317 | 2003 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(23) | NCRP Report No. 58 | 1985 | A Handbook of Radioactivity Measurement Procedures | National Council on Radiation Protection and Measurement | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (6) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.251(d)(1) Coal | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.851(a)(1)(i) | ANSI/ASME BPVC | 2019 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 111 | 1995 | Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-17(b)(2) | ARA Specification TC 128 | 2000 | AAR Specifications for Tank Cars, Grade B | Association of American Railroads | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-45 | 1973 | Lightweight Approach Light Structure | Federal Aviation Administration, U.S. Department of Transportation | |
Drug Enforcement Administration | 21 CFR 1311.105(a)(1) | Draft NIST Special Publication 800-63-1 | 2008 | Electronic Authentication Guideline; Burr, W. et al | National Institute of Standards and Technology, U.S. Department of Commerce |