This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.300-7(a) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Environmental Protection Agency | 40 CFR 63.5719(c)(4)(ii) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Food and Drug Administration | 21 CFR 173.340(a)(4) | Union Carbide Publication | 1995 | Viscosity Determination of n-butoxypoly (oxyethylene) poly (oxypropylene) glycol | Union Carbide Corporation | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1956 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 2846 | 1992 | Chlorinated-Poly-Vinyl-Chloride (CPVC) Plastic Hot- and Cold-Water Distribution Systems | ASTM International | |
Coast Guard | 46 CFR 160.010-1(b)(1) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 592 | 1980 | Blanket Insulation and Blanket Type Pipe Insulation (Metal-mesh Covered) (Industrial Type) | ASTM International | |
Environmental Protection Agency | 40 CFR 61.245(e)(3) | ASTM D 2504 | 1967 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 431.15(b)(4) | IEC 60034-1 | 1996 | Rotating Electrical Machines | International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 6892 | 1984 | Metallic Materials Tensile Testing | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 75.6(f)(1) | API MPMS | 1997 | Chapter 3, Section 5 | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S9.2.8 | ASTM D 471 | 1998 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Research and Special Programs Administration | 46 CFR 111.33-5(a) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (46) | EPA Method 608.2 | 1993 | The Determination of Certain Organochlorine Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 11 | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1631.61(a) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Coast Guard | 46 CFR 177.410(b) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 164.120-5(e)(3) | MIL-R-24719(SH) | 1989 | Military Specification, Resins, Vinyl Ester, Low Pressure Laminating | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B Supplement 1 | 1962 | Specification for Bolted Production Tanks, Supplement 1 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 272.701(a)(1) | ILHWMP | 2013 | State of Illinois Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Illinois | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (50) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.702(h) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 4785 | 1993 | Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water (Superseded) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 3246 | 1992 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Coast Guard | 46 CFR 160.077-19(c)(7)(ii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Housing and Urban Development Department | 24 CFR 3285.905(a) | NFPA 31 | 2001 | Standard for the Installation of Oil-Burning Equipment | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 12A | 2014 | Halon 1301 Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | ASTM D 3559D | 2003 | Standard Test Methods for Lead in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (4) | APHA Method 3500-Cu E | 1992 | Copper Bathocuproine Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 7131 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 600.011(c)(1) | SAE RP 1100a | 1973 | Motor Vehicle Dimensions—Recommended Practice (Report of Human Factors Engineering Committee | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-60 | 1998 | Pelvic Structure-Molded ASM-Hybrid III | General Motors Corporation | |
Coast Guard | 33 CFR 154.106(c)(2) | ANSI B16.24 | 1979 | Bronze Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American National Standards Institute | |
Food and Drug Administration | 21 CFR 176.170(b)(2) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. A, 5.3 | AHAM HRF-1 | 2008 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | APHA Method 4500-P F | 1999 | Phosphorus, Automated Ascorbic Acid Reduction Method | American Public Health Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(50) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Public Health Service | 42 CFR 52b.12(b) | NSF 49 | 1992 | Class II (Laminar Flow) Biohazard Cabinetry | National Sanitation Foundation | |
Environmental Protection Agency | 40 CFR 1043.60 Table 1 | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 193.2321 | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(BB) | EPA Ind-01. Method EV-025 | 1993 | Analytical Procedures for Determining Total Tin and Triorganotin in Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.1(g)(26) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xviii)(B) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section XI, Paragraph IWA-2316 of the 1998 Edition through the latest edition and addenda, IWA-5211(a) and (b), 1998 Edition through the latest edition and addenda | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1006 | 1986 | Plumbing Requirements for Residential Use (Household) Dishwashers | American Society of Sanitary Engineering | |
Research and Special Programs Administration | 49 CFR 173.120(a)(4) | ISO 2592 | 1973 | Petroleum Products--Determination of Flash and Fire Points--Cleveland Open Cup Method | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 147.2201(a)(3)(iii) | TXUIC regulations | 1981 | Amendment to 16 TAC section 3.71 (section .051.02.02.074) issued December 21, 1981, effective April 1, 1982 | State of Texas | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.320(c) | ICAO Publication | 2005 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Environmental Protection Agency | 40 CFR 63.11163(g)(2) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 178.3297(e) | CC Publication | 1994 | Determination of PAH Content of Carbon Black | Cabot Corporation |