This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 21 CFR 177.1585(c)(1)(i) | GE Publication | 1985 | Intrinsic Viscosity (IV) of Lexan Polycarbonate Resin By a Single Point Method using Dichloromethane as the Solvent | General Electric Co. | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 320/A 320M | 1997 | Standard Specification for Alloy-Steel Bolting Materials for Low-Temperature Service | ASTM International | |
Coast Guard | 33 CFR 155.235 | IMO Resolution MSC.35 (63) | 1994 | Adoption of Guidelines for Emergency Towing Arrangement on Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 169.672(a)(1) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.5(b) | Drawing No. SA 150 M080 | 1987 | Right leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 21 CFR 177.1020(d)(2) | FDA Publication | 1990 | Extracted Acrylonitrile Monomer by Differential Pulse Polarography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 63.14(g)(34) | ASTM D 3257 | 1993 | Standard Test Method for Aromatics in Mineral Spirits by Gas Chromatography | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(14) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Coast Guard | 46 CFR 154.176(a) | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Occupational Safety and Health Administration | 29 CFR 1926.602(c)(1)(v) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.2600(a)(1) | GUUIC regulations | 1974 | Water Resources Conservation Act, Government Code of Guam sections 57021-57025, Public Law 9-31 (March 9, 1967), as amended by Public Law 9-76 (July 29, 1967), as amended by Public Law 12-191 (December 30, 1974); | Guam Territory | |
Research and Special Programs Administration | 49 CFR 179.102-1(a)(1) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 184.1979(b)(2) | Food Chemicals Codex | 1996 | Whey | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(iii) | AOCS Method Cd 3-25 | 1989 | Saponification Value | American Oil Chemists Society | |
Federal Railroad Administration | 49 CFR 227 Appendix D B | ANSI S1.4 | 2001 | Specifications for Sound Level Meters | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (8) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(lxi) | ASTM D 6508 | 2005 | Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5089(h)(1)(iv) | ASTM E 1148 | 2002 | Standard Test Method for Measurements of Aqueous Solubility | ASTM International | |
Housing and Urban Development Department | 24 CFR 100.201 Accessible route | ANSI A117.1 | 1986 | American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 9 | USGS O-3116-87 | 1987 | Base/neutral and acid extractable compounds, whole water recoverable, GC/MS | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Permethrin) | EPA Method 608.2 | 1993 | The Determination of Certain Organochlorine Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.1201(a)(1)(ii) | MNHWMP | 1994 | EPA Approved Minnesota Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Minnesota | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | ASME MFC-4M | 1997 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.715(c) | UL 181A | 1994 | Standard for Safety Closure Systems for use with Rigid Air Ducts and Air Connectors with 1998 revisions | Underwriters Laboratories, Inc. | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A 153 | 1987 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Food and Drug Administration | 21 CFR 102.23(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.2 | 2005 | Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 62a | 1972 | Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CPSE) | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 80.580(c)(2)(i) | ASTM D 6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. C, 2.6.3.1(A) | AHAM DW-1 | 1992 | Household Electric Dishwashers | Association of Home Appliance Manufacturers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1835 | 1997 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.945(a)(1)(i) | ASTM D 418 | 1992 | Standard Methods of Testing Pile Yarn Floor Covering Construction (Withdrawn 1998) | ASTM International | |
Coast Guard | 46 CFR 182.415(c)(2) | SAE J-1928 | 1989 | Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(i)(5)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(i) | EPA Publication | 1978 | Methods for Benzidine, Chlorinated Organic Compounds, Pentachlorophenol and Pesticides in Water and Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(60) | ASTM D 1552 | 1983 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.68(b)(12) | 29 CFR 1910.27 | 2014 | Safety Requirements for Fixed Ladders | Occupational Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 46 CFR 162.161-6(b) | UL 2127 | 2001 | Standard for Safety for Inert Gas Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (19) | ASTM D 4190 | 2008 | Metals by Direct Current Plasma | ASTM International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Chloride) | APHA Method 4500-Cl D | 1998 | Chlorine, Amperometric direct | American Public Health Association | |
Coast Guard | 46 CFR 160.058-1(a)(1) | MIL-D-5531D | 1989 | Desalter Kit, Sea Water, Mark 2 | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 572.170(c)(2) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Hexachlorocyclopentadiene) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.104a(d)(3) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 55.14(d)(5)(i) | 40 CFR part 52, subpart I | 2008 | State of Delaware Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Federal Highway Administration | 23 CFR 625.4(d)(2) | D1.4/D1.4M | 2011 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B 16 | 1992 | Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 207.1 | ICC/IBC | 2000 | International Building Code | International Code Council |