| Consumer Product Safety Commission |
|
16 CFR 1631.4(b)(1)(iii) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
|
American Association of Textile Chemists and Colorists |
| Housing and Urban Development Department |
|
24 CFR 3280.604(b)(2) |
CISPI HSN |
1985 |
Specifications for Neoprene Rubber Gaskets for Hub and Spigot Cast Iron Soil Pipe Fittings
|
Cast-Iron Soil Pipe Institute |
| Research and Special Programs Administration |
|
49 CFR 172.102(c)(3) B13c |
AA Publication |
1982 |
Aluminum Standards and Data, Seventh Edition
|
Aluminum Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.1(c) |
AGA Report No. 3, Part 1 |
1992 |
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 1: General Equations and Uncertainty Guidelines
|
American Gas Association |
| Mine Safety and Health Administration |
|
30 CFR 57 Subpart C Appendix I |
NFPA 16 |
2011 |
Foam Water Spray Extinguishing Systems
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 52.741(s)(1)(i)(A) |
35 I.A.C. 215, Subpart S |
1989 |
Administrative Code
|
State of Illinois |
| Rural Utilities Service |
|
7 CFR 1755.890(i)(10) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
| Environmental Protection Agency |
|
40 CFR 60.632(f) |
ASTM E168 |
1967 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(w)(3) |
UL 142 |
1968 |
Steel Aboveground Tanks for Flammable and Combustible Liquids
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 160.052-4(b) |
46 CFR 160.055 |
2012 |
Life Preserver, Unicellular Plastic Foam, Adult and Child NDG
|
U.S. Coast Guard |
| National Highway Traffic Safety Administration |
|
49 CFR 572.174(b) |
Part No. 420-0000 |
2011 |
Engineering drawings and specifications
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (36) |
EPA Method 608 |
1982 |
Organochlorine Pesticides & PCBs by GC/ECD
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Sulfate) |
APHA Method 4500-SO4(2-) E |
1998 |
Sulfate, Turbidimetric Method
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 63, Subpart IIII, Appendix A, Section 2.1 |
EPA-450-3-88-018 |
1988 |
Protocol for Determining Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.1208(b)(5)(ii) |
ASTM D6735 |
2001 |
Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method
|
ASTM International |
| Energy Department |
|
10 CFR 431.15(b)(4) |
IEC 60034-1 |
1996 |
Rotating Electrical Machines
|
International Electrotechnical Commission |
| Health and Human Services Department |
|
45 CFR 162.920(a)(8) |
ASC X12N 276/277 |
2002 |
Addenda to Health Care Claim Status Request and Response, Version 4010
|
Washington Publishing Company |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(35) |
ASTM F1805 |
2000 |
Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (38) |
EPA Method 1625 B |
1990 |
Semivolatile Organic Compounds by Isotope Dilution GC/MS
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
EPA Method 903.1 |
1980 |
Radium-226 Radon Emanation Technique
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60.4415(a)(1) |
ASTM D4057 |
2000 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1926.602(b)(3) |
PCSA 2 |
1968 |
Mobile Hydraulic Crane Standards
|
Power Crane and Shovel Association |
| Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(a) |
ASTM B161 |
1993 |
Standard Specification for Nickel Seamless Pipe and Tube
|
ASTM International |
| National Archives and Records Administration |
|
36 CFR 1234.3(h)(3) |
UL 611 |
1996 |
Central-Station Burglar-Alarm Systems
|
Underwriters Laboratories, Inc. |
| National Highway Traffic Safety Administration |
|
49 CFR 572.10(a) |
Drawing No. SA 150 M070 |
1987 |
Right Arm Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Coast Guard |
|
33 CFR 157.02(b)(4) |
IMO Marine Environment Protection Committee Resolu |
1983 |
Guidelines for Plan Approval and Installation Survey of Oil Discharge Monitoring and Control Systems for Oil Tankers and Environmental Testing of Control Sections Thereof
|
International Maritime Organization |
| Minerals Management Service |
|
30 CFR 250.490(j)(13)(ii) |
ANSI Z88.2 |
1992 |
Respiratory Protection
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 111.60-3(b)(1) |
IEEE Std 1580 |
2001 |
Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Platforms
|
Institute of Electrical and Electronics Engineers |
| Federal Railroad Administration |
|
49 CFR 238.311(a) |
APTA SS-M-005 |
1998 |
Code of Tests for Passenger Car Equipment Using Single Car Testing Device
|
American Public Transit Association |
| Coast Guard |
|
46 CFR 54.10-1(a) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda)
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(141) |
ASTM D4017 |
1981 |
Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.403 S6.2.3 |
SAE J-211/1 |
1995 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(19) |
ANSI J6.4 |
1971 |
Rubber Insulating Blankets
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (39) |
APHA Method 4500-NO3 F |
2000 |
Nitrate Nitrogen by Selective Electrode
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (12) Cyanide |
APHA Method 4500-CN G |
1999 |
Cyanide Amenable to Chlorination after Distillation
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.800(c)(3) |
API RP 2SM |
2001 |
Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring
|
American Petroleum Institute |
| Coast Guard |
|
40 CFR 136.3(a) Table IF (Chloroform) |
EPA Method 551 |
1990 |
Chlorination Disinfection Byproducts, Liquid/Liquid Extraction and GC/ECD
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 61.245(e)(3) |
ASTM D2504 |
1993 |
Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography
|
ASTM International |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(iv) |
ASTM C1045 |
1990 |
Standard Test Method for Calculating Thermal Transmission Properties from Steady-State Heat Flux Measurements
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(d)(3)(ii) |
ASTM D790 |
2007 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IA Footnote 16 |
Quanti-Tray® Method |
2002 |
Quanti-Tray® Method
|
IDEXX Laboratories |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (1) |
EPA Method 200.7 |
1994 |
Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(17) |
SAE J-1962 |
2002 |
Diagnostic Connector Equivalent to ISO/DIS 15031-3
|
Society of Automotive Engineers |
| Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
AGA All Standards |
2013 |
All specifications, standards and codes without specific reference
|
American Gas Association |
| National Highway Traffic Safety Administration |
|
49 CFR 572.187(a) |
Drawing No. 175-9000 |
2009 |
Headform assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Food and Drug Administration |
|
40 CFR 1065.701 Table 1 |
ASTM D6751 |
2012 |
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
|
ASTM International |
| Coast Guard |
|
46 CFR 160.013-1(a)(1) |
FedSpec GGG-A-926 |
1999 |
Axes
|
Federal Specifications Standards and Test Methods |
| Research and Special Programs Administration |
|
49 CFR 176.30(a)(5)(ii) |
IMDG Code |
2006 |
International Maritime Dangerous Goods Code
|
International Maritime Organization |
| Occupational Safety and Health Administration |
|
29 CFR 1915.153(b)(2) |
ANSI Z87.1 |
1998 |
Practice for Occupational and Educational Eye and Face Protection
|
American National Standards Institute |