This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(7)(ii) | APHA Method 4500-ClO2 E | 1995 | Chlorine Dioxide, Amperometric Method II | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(10) | ANSI A17.1d | 1970 | Safety Code for Elevators, Dumbwaiters, and Moving Walks | American National Standards Institute | |
Federal Communications Commission | 47 CFR 80.1101(c)(5)(i) | IMO Resolution A.812(19) | 1995 | Performance Standards for Float-Free Satellite EPIRBs Operating Through the Geostationary INMARSAT Satellite System on 1.6 GHz | International Maritime Organization | |
Coast Guard | 46 CFR 160.170-5(c)(2) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 164.023-7(a)(1) | Federal Standard 191A | 1978 | Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 45 CFR 162.1203(a)(6) | CAQH Publication | 2011 | Phase I CORE 157: Eligibility and Benefits System Availability Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Housing and Urban Development Department | 24 CFR 200.948(a)(1)(v) | ASTM D 3676 | 1978 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay | ASTM International | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 320/A 320M | 1997 | Standard Specification for Alloy-Steel Bolting Materials for Low-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (36) | APHA Method 3111 D | 1999 | Metals by Flame Atomic Absorption, Nitrous Oxide | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (9) Chromium | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Energy Department | 10 CFR 434.402.1.2.2 | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (RS-5) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(iii) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 515/A 515M | 2003 | Standard Specification for Carbon Steel Plates for Pressure Vessels for Intermediate and Higher Temperature Service | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.183(c)(2) | Drawing No. 175-9000 | 2009 | Headform assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(R) | EPA Method 365.3 | 1978 | Phosphorus, All Forms (Colorimetric, Ascorbic Acid, Two Reagent) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 3 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Section (2) | SAE J-1989 | 1989 | Recommended Service Procedure for the Containment of R-12 | Society of Automotive Engineers | |
Coast Guard | 33 CFR 155.140(e)(4) | NFPA 1405 | 2006 | Guide for Land-Based Fire Fighters Who Respond to Marine Vessel Fires | National Fire Protection Association | |
Coast Guard | 46 CFR 110.10-1(k)(6) | NEMA WC-70/ICEA S-95-658 | 1999 | Standard for Non-Shielded Power Rated Cable 2000V or Less for the Distribution of Electrical Energy | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 147.1751(b)(2) | NDUIC regulations | 1979 | North Dakota Century Code, Ch. 38-12 (Regulation, Development, and Production of Subsurface Minerals) | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63.7732(g)(1)(v) | NIOSH Method 2010 | 1994 | Amines, Aliphatic, Issue 2 | National Institute for Occupational Safety and Health | |
Food and Drug Administration | 21 CFR 178.3770(d)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(3) | AWS D3.6M | 1999 | Specification for Underwater Welding | American Welding Society | |
Coast Guard | 46 CFR 160.010-1(c)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 272.2201(b)(1)(i) | TXHWMP | 2012 | EPA-Approved Texas Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Texas | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 408.3.2.1 | BHMA A156.19 | 1997 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(48) | ASTM D 1072 | 1994 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(5) | CGA G-8.1 | 1964 | Standard for the Installation of Nitrous Oxide Systems at Consumer Sites | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 184.1792(b) | Food Chemicals Codex | 1981 | Sodium Sesquicarbonate | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1) | RT Publication | 2000 | Parts List and Drawings, Part 572 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (HIII-5F, Alpha Version) | Reprographic Technologies | |
Minerals Management Service | 30 CFR 250.1900(a) | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.18(a) | Drawing No. SA 103C 001 | 1976 | Operation and Maintenance Manual for 3-year-old Test Dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (56) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 89.6(a)(1) | ASTM D 86 | 1997 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(2)(ii) | SAE J-987 | 2003 | Lattice Boom Cranes—Method of Test | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (63) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (chromium) | EPA Method 218.7 | 2011 | Determination of Hexavalent Chromium in Drinking Water by Ion Chromatography with Post-Column Derivatization and UV-Visible Spectroscopic Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.5406(b)(4)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 154.106(c)(3) | ANSI B31.3 | 1987 | Chemical Plant and Petroleum Refinery Piping, (including B31.3a-1988, B31.3b-1988, and B31.3c-1989 addenda) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-1, 16.0(4) | EPA-340-1-86-009a | 1986 | Evaluation of Opacity CEMS Reliability and Quality Assurance Procedures. Volume 1 | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 434.402.1.2.3 | LTH Report TVAHB-3007 | 1981 | Thermal Bridges in Sheet Metal Construction (RS-9) | Lund Institute of Technology | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.274(h)(5)(iv) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.51(b)(1) 249 | National Formulary | 1980 | Formula No. 25-A | U.S. Pharmacopeial Convention | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S4.1.2 | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets. | ASTM International | |
Food and Drug Administration | 21 CFR 177.1520(b) | ASTM D 611 | 1982 | Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(h)(1) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Housing and Urban Development Department | 24 CFR 200.926b(a)(1) | CABO 1 & 2 Family Code | 1992 | One and Two Family Dwelling Code including the 1993 amendments, Appendices A, B, D, and E, but excluding Chapter I and the phrase “or approved fire retardant wood” contained in the exception of paragraph R-218.2.2(2) | Council of American Building Officials | |
Coast Guard | 46 CFR 164.120-5(d)(8) | ISO 1675-1985(E) | 1985 | Plastics—Liquid resins—Determination of density by the pyknometer method, Second Edition | International Organization for Standardization |