| Environmental Protection Agency |
|
40 CFR 63, Appendix A, Method 306A, Section 7.1.1 |
ASTM D1193 |
1977 |
Standard Specification for Reagent Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Appendix A, Method 308, Section 7.1.1 |
ASTM D1193 |
1991 |
Standard Specification for Reagent Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.99(a)(5)(ii)(A) |
CA State Regulations |
2010 |
California Regulatory Requirements Applicable to the Air Toxics Program
|
State of California |
| Environmental Protection Agency |
|
40 CFR 63.99(a)(5)(ii)(C) |
CA State Regulations |
2010 |
California Regulatory Requirements Applicable to the Air Toxics Program
|
State of California |
| Environmental Protection Agency |
|
40 CFR 63.99(a)(5)(ii)(E) |
CA State Regulations |
2010 |
California Regulatory Requirements Applicable to the Air Toxics Program
|
State of California |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDD, Table 4, (4) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (1)(a)(ii)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (1)(a)(iii)(1) |
ASTM D6522 |
2000 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (1)(a)(iii)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (2)(a)(ii)(1) |
ASTM D6522 |
2000 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (2)(a)(ii)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(ii)(1) |
ASTM D6522 |
2000 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(ii)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(v)(1) |
ASTM D6522 |
2000 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(v)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, Footnote (a) |
ASTM D6522 |
2000 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, Footnote (a) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (2)(a)(iii)(1) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (2)(a)(iv)(1) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(iii)(1) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(iv)(1) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(v)(1) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, Footnote (b) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1208(b)(1)(i)(B)(3) |
EPA Method 0023A |
1996 |
Sampling Method for Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofurans Emissions from Stationary Sources
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.1208(b)(5)(i)(C)(1) |
ASTM D6735 |
2001 |
Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1208(b)(5)(i)(C)(5) |
ASTM D6735 |
2001 |
Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1215(f)(5)(ii)(A) |
ASTM D6735 |
2001 |
Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart EEE, Appendix, 6.7 |
ASTM E29 |
1990 |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart RRR, Appendix A |
ACGIH Publication |
1998 |
Industrial Ventilation Manual: A Manual of Recommended Practice, 23rd Edition, Chapters 3 and 5
|
American Conference of Governmental Industrial Hygienists |
| Environmental Protection Agency |
|
40 CFR 63.1503, TEQ |
EPA-625-3-89-016 |
1989 |
Interim Procedures for Estimating Risks Associated with Exposures to Mixtures of Chlorinated Dibenzo-p-Dioxins and -Dibenzofurans (CDDs and CDFs)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(i) |
ASTM D6420 |
1999 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(i) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii) |
ASTM D6420 |
1999 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii)(A) |
ASTM D6420 |
1999 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii)(A) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii)(B) |
ASTM D6420 |
1999 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii)(B) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.2450(j)(2)(iii) |
ASTM D6420 |
1999 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.3151(b) |
ASTM D1475 |
2003 |
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.3161(f)(1) |
ASTM D2697 |
1998 |
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart PPPP, Appendix A, Section 2.4 |
ASTM E145 |
2003 |
Standard Specification for Gravity-Convection and Forced- Ventilation Ovens
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.3161(g) |
ASTM D5066 |
2001 |
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints--Weight Basis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.3161(g) |
EPA-450-3-88-018 |
1988 |
Protocol for Determining the Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.3165(e) |
EPA-450-3-88-018 |
1988 |
Protocol for Determining the Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart IIII, Appendix A, Section 2.1 |
EPA-450-3-88-018 |
1988 |
Protocol for Determining Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart IIII, Appendix A, Section 2.2 |
EPA-450-3-88-018 |
1988 |
Protocol for Determining Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart IIII, Appendix A, Section 4.1 |
EPA-450-3-88-018 |
1988 |
Protocol for Determining Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart IIII, Appendix A, Section 4.2 |
EPA-450-3-88-018 |
1988 |
Protocol for Determining Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.3521(b)(1) |
ASTM D2697 |
1998 |
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
|
ASTM International |