This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (PCBs (as Aroclors)) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(iii) | ASME MFC-4M | 1986 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 261.21(a)(1) | ASTM D93 | 1980 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(v)(1)(i) | 35 I.A.C. 215, Subpart V | 1989 | Administrative Code | State of Illinois | |
Energy Department | 10 CFR 431.134(b) | ARI 810 | 2003 | Performance Rating of Automatic Commercial Ice-Makers 2003 | Air Conditioning and Refrigeration Institute | |
Coast Guard | 40 CFR 60, Appendix B, PS-1, 6.1 | ASTM D6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(f)(15) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.53(b) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200.946(a)(2) | EIMA Test Method 101.02 | 1995 | Standard Test Method for Resistance to Water of Exterior Insulation and Finish Systems (EIFS), Class PB (modified ASTM E331-91) | Exterior Insulation Manufacturers Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(c) | ASTM D5198 | 2009 | Standard Practice for Nitric Acid Digestion of Solid Waste | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 1.9 | ANSI C78.81 | 2003 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Coast Guard | 46 CFR 164.120-5(d)(1) | ISO 62:2008(E) | 2008 | Plastics—Determination of water absorption, Third Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 58 Appendix C, 4.3 | EPA-600-4-90-0003 | 1989 | Quality Assurance Handbook for Air Pollution Measurement Systems: Volume IV. Meteorological Measurements | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(1) | EPA Method 502.1 | 1989 | Volatile Halogenated organic Compounds in Water by Purge and Trap Gas Chromatography | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0023 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
National Oceanic and Atmospheric Administration | 50 CFR 226.210 | USGS Publication | 1974 | 1:500,000 Scale Hydrologic Unit Maps for the State of Oregon | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(2)(vii) | Drawing No. 175-4000 | 2009 | Thorax Assembly with Rib Extensions | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii) | EPA-600-R-94-111 | 1994 | Methods for the Determination of Metals in Environmental Samples, Supplement I | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 10 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 7.4.1.2 | CGA S-1.1 | 2015 | Pressure Relief Device Standard Part 1—Cylinders for Compressed Gases | Compressed Gas Association | |
Coast Guard | 46 CFR 111.60-3(a)(2) | UL 1309 | 1995 | Standard for Marine Shipboard Cable | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S6.10.2(a) | SAE J-1703 | 1995 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Coast Guard | 33 CFR 154.106(c)(1) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.3.1 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3282.12(b)(3)(i)(C)(4) | NFPA 70 | 2013 | National Electrical Code | National Fire Protection Association | |
Rural Utilities Service | 29 CFR 1926.6(y)(2) | NFPA 13 | 1969 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(22)(iii) | CIA CRS-1 | 1979 | Polyester/Polypropylene Composite Rope Specifications, Three- and Eight-Strand Standard Construction | Cordage Institute | |
Rural Utilities Service | 7 CFR 1755.902(r)(15)(iv)(A) | TIA/EIA 455-3A, FOTP-3 | 1989 | Procedure to Measure Temperature Cycling on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components | Electronic Industries Association and/or Telecommunications Industry Association | |
Coast Guard | 46 CFR 160.077-19(d)(2) | Federal Standard 191 | 1978 | Method 5100, Strength and Elongation, Breaking of Woven Cloth: Grab Method | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix D Table | USDOC Publication | 1977 | Model Performance Criteria for Structural Firefighters' Helmets | U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 80.8(e)(1)(iii) | ASTM D5842 | 2014 | Standard Practice for Sampling and Handling of Fuels for Volatility Measurement | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5300-6 | 1969 | Airport Design Standards--General Aviation Airports--Basic and General Transport | Federal Aviation Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(2) | DICOM Standard PS 3.4-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 4: Service Class Specifications | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(m)(1) | UNECE Regulation 17 | 2002 | Uniform Provisions Concerning the Approval of Vehicles with Regard to the Seats, their Anchorages and Any Head Restraints: ECE 17 Rev. 1/Add. 16/Rev. 4 | United Nations Economic Commission for Europe | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (48) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1700(a)(5) | NCUIC regulations | 1989 | North Carolina Drinking Water Act, N.C. GEN. STAT. §§ 130A-311 through 130A-332 | State of North Carolina | |
Environmental Protection Agency | 40 CFR 63.7944(b)(2)(iv) | ASTM D2879 | 1983 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(3) | API 12B | 1958 | Specification for Bolted Production Tanks | American Petroleum Institute | |
Coast Guard | 46 CFR 160.061-1(a)(1) | FedSpec QQ-W-423 | 1969 | Wire, Steel, Corrosion-Resisting | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 49 CFR 178.338-1(c) | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.57(f)(4)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (53) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | GATechERC Publication | 2004 | The Determination of Radium-226 and Radium-228 in Drinking Water by Gamma-ray Spectrometry Using HPGE or Ge(Li) Detectors, Revision 1.2 | GA Institute of Technology, Environment Resource Center | |
Environmental Protection Agency | 40 CFR 60.5406(b)(3) | ASTM E260 | 1973 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.14131(d) | SAE J-386 | 1985 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.01-2(e)(76) | ASTM F1172 | 2010 | Fuel Oil Meters of the Volumetric Positive Displacement Type | ASTM International | |
Coast Guard | 46 CFR 56.85-10 Table 56.85-10 | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.102 (b)(ii) | ANSI Z87.1-2003 | 2003 | Occupational and Educational Personal Eye and Face Protection Devices | American National Standards Institute |