This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(12) | ANSI A90.1 | 1969 | Safety Standard for Manlifts | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 36.6(c)(3) | ICAO Annex 16 | 2002 | Environmental Protection, Volume I, Aircraft Noise | International Civil Aviation Organization | |
Housing and Urban Development Department | 24 CFR 100.201 Accessible route | ICC/ANSI A117.1 | 1998 | American National Standard: Accessible and Usable Buildings and Facilities | International Code Council | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (16) | EPA Method 611 | 1982 | Haloethers GC/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(34) | ASTM D3257 | 1993 | Standard Test Method for Aromatics in Mineral Spirits by Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. N, 10.4.1 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 162.161-5(b)(1) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (3) Arsenic | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 6.0 (1) | ANSI/ASQC E4 | 2004 | Specifications and Guidelines for Quality Systems for Environmental Data Collection and Environmental Technology Programs | American Society for Quality Control | |
Federal Highway Administration | 23 CFR 655.601(a) | FHWA Publication | 2012 | Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD), including Revisions No. 1 and No. 2 | Federal Highway Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (7) | EPA Method 1600 | 2009 | Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-?-D-Glucoside Agar (mEI) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 430.01(s) | EPA Method 1613 B | 2015 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.580(c)(1)(i) | ASTM D5453 | 2012 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence | ASTM International | |
Federal Trade Commission | 16 CFR 460.5(a) | ASTM C1114 | 2000 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | CABO Model Energy Code | 1992 | Model Energy Code | Council of American Building Officials | |
Research and Special Programs Administration | 49 CFR 172.519(d)(2)(i) | ASTM G23 | 1969 | Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials | ASTM International | |
Coast Guard | 33 CFR 142.39(a) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.17(g)(17) | ASTM D86 | 1993 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.890(j)(4) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.111a(g) Reid vapor pressure | ASTM D323 | 1982 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.3(c)(2) | ASTM F2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Coast Guard | 46 CFR 160.055-5(c)(2) | Drawing No. 160.055-1B, Sheet 3 | 2012 | Life Preservers, Unicellular Foam, Child, Construction and Arrangement, Cloth Covered, Model 67, Child | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(1) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 72.2 EPA Protocol Gas Production Site | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 431.15(e)(2)(i) | NIST Handbook 150 | 1994 | Procedures and General Requirements | National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program | |
Consumer Product Safety Commission | 16 CFR 1616.5(b)(1) Footnote 4 | ASTM D1776 | 1967 | Conditioning Textiles and Textile Products for Testing | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(8) | SAE J-567b | 1964 | Bulb Sockets | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (40) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1350(a)(2) | MTUIC regulations | 1996 | Montana Regulatory Requirements Applicable to the Underground Injection Control Program | State of Montana | |
Environmental Protection Agency | 40 CFR 63.5758(a)(3) | ASTM D1259 | 1985 | Standard Test Method for Nonvolatile Content of Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (43) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-U C | 2000 | Uranium-Isotopic Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D1072 | 1999 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 14597 | 1997 | Petroleum products--Determination of vanadium and nickel content--Wavelength-dispersive X-ray fluorescence spectrometry | International Organization for Standardization | |
Mine Safety and Health Administration | 30 CFR 75.818(b)(4) | ASTM F496 | 1997 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0014 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 173.40(d)(2) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Coast Guard | 33 CFR 164.13(d)(3) | IEC 62065 (2014-02) | 2014 | Maritime navigation and radiocommunication equipment and systems—Track control systems—Operational and performance requirements, methods of testing and required test results | International Electrotechnical Commission | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 318 | 1992 | Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Minerals Management Service | 30 CFR 250.804(a) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 12.02-7(e) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S4.1.2.1 | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Coast Guard | 46 CFR 54.25-20(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 75.6(f)(3) | API MPMS | 1988 | Chapter 4, Section 3 | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.143(a) | Drawing No. 210-2040 | 2009 | Neck Cable | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1926.6(m)(2) | ANSI/AWS D14.3 | 1994 | Specification for Welding Earthmoving and Construction Equipment | American Welding Society | |
Coast Guard | 46 CFR 56.01-2(e)(37) | ASTM A420/A 420M | 1996 | Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1806-05(h)(1)(iii) | ISO 14230-4 | 2000 | Road Vehicles--Diagnostic Systems | International Organization for Standardization |