| Coast Guard |
|
46 CFR 111.60-7 Table 111.60-7 |
NEC 2002 |
2002 |
National Electrical Code Handbook
|
National Fire Protection Association |
| National Highway Traffic Safety Administration |
|
49 CFR 572.161(a)(1) |
LM Publication |
2009 |
Parts List and Drawings, Part 572 Subpart S, Hybrid III 6-Year-Old Child Weighted Crash Test Dummy (H-III6CW)
|
Leet-Melbrook |
| Coast Guard |
|
33 CFR 154, Appendix B, 3.1 |
ASTM F1155 |
1998 |
Standard Practice for Selection and Application of Piping System Materials
|
ASTM International |
| Alcohol, Tobacco, Firearms, and Explosives Bureau |
|
27 CFR 21.60(a) |
The United States Pharmacopoeia |
1980 |
Formula No. 33
|
U.S. Pharmacopeial Convention |
| Research and Special Programs Administration |
|
49 CFR 192.55(e) |
API 5L |
2004 |
Specification for Line Pipe
|
American Petroleum Institute |
| Coast Guard |
|
40 CFR 444.12(b)(1) Table (3) |
APHA Method 3500-Cr D |
1995 |
Chromium by Colorimetric Method
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 1065.1010(f)(1) |
NIST Special Publication 811 |
2008 |
Guide for the Use of the International System of Units (SI)
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Coast Guard |
|
46 CFR 27.211(f)(1) |
ABYC H-33 |
1989 |
Diesel Fuel Systems
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 58.03-1(d)(3) |
ANSI B93.5 |
1979 |
Recommended practice for the use of Fire Resistant Fluids for Fluid Power Systems
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (74) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Energy Department |
|
10 CFR 430 Subpart B, App. A, 2.6(c) |
AHAM HRF-1 |
2008 |
Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers
|
Association of Home Appliance Manufacturers |
| Coast Guard |
|
46 CFR 160.156-11(c)(2)(ii) |
ASTM A653/A 653M |
2008 |
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (15) |
APHA Method 5220 C |
1997 |
Chemical Oxygen Demand by Closed Reflux and Titration
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(lxii) |
ASTM D6888 |
2009 |
Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Aluminum) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(a) |
EPA Method 1631 |
2015 |
Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Pentachlorophenol) |
EPA Method 515.1 |
1995 |
Chlorinated acids Liquid/Liquid and GC/ECD
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Endothall) |
EPA Method 548.1 |
1992 |
Endothall by Ion Exchange, Methylation, GC/MS
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60 Subpart JJJJ, Table 2(1)(c)(iv) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(d)(21) |
ASME B16.34 |
1996 |
Valves--Flanged, Threaded, and Welding End
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
46 CFR 111.60-21 |
IEEE 45 |
2002 |
Recommended Practice for Electrical Installations on Shipboard
|
Institute of Electrical and Electronics Engineers |
| Coast Guard |
|
46 CFR 183.360(b)(3) |
ABS Publication |
1995 |
Rules for Building and Classing Steel Vessels
|
American Bureau of Shipping |
| Environmental Protection Agency |
|
40 CFR 238.30(a) |
ASTM D3826 |
1991 |
Standard Practice for Determining Degradation End Point in Degradable Polyolefins Using a Tensile Test
|
ASTM International |
| Mine Safety and Health Administration |
|
30 CFR 77.403-1(d)(1)(i) |
SAE J-320b |
1972 |
Minimum Performance Criteria for Rollover Protective Structures for Prime Movers
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1065.701 Table 1 |
ASTM D5797 |
2013 |
Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
|
ASTM International |
| Coast Guard |
|
46 CFR 10.107(b) STCW endorsement |
STCW Convention |
1995 |
STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers
|
International Maritime Organization |
| Rural Utilities Service |
|
7 CFR 1755.860(o)(5)(i) |
ASTM D4566 |
1990 |
Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 24, Section 6.1 |
ASTM D1475 |
1990 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 3280.703 |
ARI 210/240 |
1989 |
Unitary Air-Conditioning and Air-Source Heat Pump Equipment
|
Air Conditioning and Refrigeration Institute |
| Coast Guard |
|
46 CFR 159.001-3 Classification Society |
IMO Resolution A.739(18) |
1993 |
Guidelines for the Authorization of Organizations Acting on Behalf of the Administration
|
International Maritime Organization |
| National Highway Traffic Safety Administration |
|
49 CFR 572.151 Table A |
Drawing No. 921022-054L |
2001 |
Arm Assembly, Left
|
Reprographic Technologies |
| Occupational Safety and Health Administration |
|
29 CFR 1910.253(e)(4)(iv) |
CGA Regulator Connection Standards, 1958 |
1958 |
Regulator Connection Standard
|
Compressed Gas Association |
| Food and Drug Administration |
|
21 CFR 137.105(c)(1) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
| Energy Department |
|
10 CFR 434.701.1 RS-22 |
UL 727 |
1996 |
Oil-Fired Central Furnaces (RS-22)
|
Underwriters Laboratories, Inc. |
| Nuclear Regulatory Commission |
|
10 CFR 50.55a(g)(6)(ii)(E)(2) |
ASME Code Case N-722 |
2005 |
Additional Examinations for PWR Pressure Retaining Welds in Class 1 Components Fabricated with Alloy 66/82/182 Materials, Section XI, Division 1
|
American Society of Mechanical Engineers |
| Federal Railroad Administration |
|
49 CFR 232.603(a)(1) |
AAR S-4200 |
2008 |
Electronically Controlled Pneumatic (ECP) Cable-Based Brake Systems—Performance Requirements
|
Association of American Railroads |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (23) |
USGS O-1126-95 |
1995 |
Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 55.14(e)(22)(i)(A) |
40 CFR part 52, subpart VV |
2011 |
Outer Continental Shelf Air Regulations Consistency Update for Virginia
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 80.330(e)(1)(ii) |
ASTM D4177 |
2010 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
NFPA 36 |
2004 |
Solvent Extraction Plants
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 430.01(i) Table |
EPA Method 1613 |
2015 |
Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS
|
U.S. Environmental Protection Agency |
| Public Health Service |
|
27 CFR 21.51(a) |
The United States Pharmacopoeia |
1980 |
Formula No. 25-A
|
U.S. Pharmacopeial Convention |
| Housing and Urban Development Department |
|
24 CFR 3280.304(b)(1) |
ANSI/AAMA/NWWDA 101/I.S. 2 |
1997 |
Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors
|
National Wood Window and Door Association |
| Coast Guard |
|
46 CFR 110.10-1(o)(11) |
UL 1042 |
1994 |
Electric Baseboard Heating Equipment
|
Underwriters Laboratories, Inc. |
| Energy Department |
|
10 CFR 431.19(c)(4) |
CSA C390 |
1993 |
Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1)
|
Canadian Standards Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.94(c)(6)(iii)(A) |
42 CFR Part 84 |
2014 |
Respiratory Protection
|
National Institute for Occupational Safety and Health |
| Coast Guard |
|
46 CFR 111.52-5(c) |
IEC 61363-1 |
1998 |
Electrical Installations of Ships and Mobile and Fixed Offshore Units—Part 1: Procedures for Calculating Short-Circuit Currents in Three-Phase a.c., First Edition
|
International Electrotechnical Commission |
| Research and Special Programs Administration |
|
40 CFR 136.3(a) Table IB (29) |
EPA Method 235.2 |
1978 |
Iridium by Graphite Furnace Atomic Absorption
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.2.3 |
ASTM D4057 |
1981 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(40) |
ANSI K13.1 |
1967 |
Identification of Gas Mask Containers
|
American National Standards Institute |