This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(b)(20)(iv) | IDEXX Test Methods | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435 Appendix 5, Subpart A | EPA Method 1655 | 2015 | Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Recommended Service Procedure, Section 1 | SAE J-1990 | 1990 | Extraction and Recycle Equipment for Mobile Automotive Air-Conditioning Systems | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.6(a) | Drawing No. SA 150 M010 | 1987 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 147.550(a)(4) | GAUIC regulations | 1988 | Georgia Administrative Procedure Act, O.C.G.A. §§ 50-13-1 through 50-13-22 (Reprinted from the O.C.G.A. and 1988 Cumm. Supp.) | State of Georgia | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 1, (1)(b) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 57.3203(a)(1) | ASTM F 432 | 1995 | Standard Specification for Roof and Rock Bolts and Accessories | ASTM International | |
Coast Guard | 46 CFR 12.02-7(e) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 672 | 2001 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | ASTM International | |
Environmental Protection Agency | 40 CFR 89.6(a)(5) | ASTM D 445 | 2009 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(e)(35) | ASTM D 7430 | 2008 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Coast Guard | 33 CFR 142.42(b) | ANSI A10.14 | 1975 | Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1) | SAE J-397a | 1973 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 173.315(j)(1) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 175.600(b) Table | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.225 S6.2.2(a)(1) | SAE J-1100 | 1993 | Motor Vehicle Dimensions | Society of Automotive Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. B1, 2.4(c) | AHAM HRF-1 | 1979 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 111.105-7 | IEC 60079 | 2012 | Electrical Apparatus for Explosive Gas Atmospheres Series | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.33(b) | Drawing No. 78051-98 | 1987 | Title not specified | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (62) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 101.81(c)(2)(ii)(B)(2) | AOAC Publication | 1995 | Determination of Soluble and Insoluble Dietary Fiber in Psyllium-containing Cereal Products | AOAC International | |
Food and Drug Administration | 21 CFR 172.869(b)(9) | Food Chemicals Codex | 1997 | Sucrose Fatty Acid Esters | National Academy Press | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(5) | ASME B30.14, Section 14-1.7.2 | 2004 | Side Boom Tractors, General Requirements—Exhaust Gases | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (70) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (total chromium) | ASTM D 5673 | 2010 | Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.485a(g)(5) | ASTM D 2504 | 1993 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 160.060-1(a)(3) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (18) Nitrate | ASTM D 3867B | 1990 | Standard Test Methods for Nitrite-Nitrate in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(f)(6) | ASME MFC-7M | 2006 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 175.250(b)(1) | ASTM D 938 | 1981 | Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum | ASTM International | |
Coast Guard | 33 CFR 154, Appendix C, 6.3.1 | ASTM F 631 | 1993 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1400(a)(1) | NEUIC regulations | 1981 | Rules and Regulations of the Nebraska Oil and Gas Conservation Commission, Rules 1 through 6 | State of Nebraska | |
Rural Utilities Service | 7 CFR 1755.870(h)(4)(iii) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-15 | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 534 | 1988 | Preformed Flexible Elastomeric Cellular Insulation in Sheet and Tubular Form | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.110(a)(6) | Drawing No. 78051-61X | 1997 | Head Assembly—complete, revision C | Reprographic Technologies | |
Coast Guard | 46 CFR 161.002-4(b)(1) | UL 38 | 1994 | Standard for Manually Actuated Signaling Boxes for Use with Fire-Protective Signaling Systems | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.140(a)(1)(ii) | Drawing No. 210-2001 | 2001 | Neck Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 268.48(a), Universal Treatment Standards Table Footnote 4 | EPA Method 9010C | 2004 | Total and Amenable Cyanide: Distillation | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.86(a)(1) | FMVSS 223 | 1998 | Rear Impact Guards | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.20-1(c)(2)(ii) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (50) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(19) | ASTM D 2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1203.4(p) | ISO 6220 | 1983 | Draft Standard for Headforms for Use in the Testing of Protective Helmets | International Organization for Standardization | |
Coast Guard | 46 CFR 160.151-21(m) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.705(b)(3) | ISO 8217 | 2005 | Petroleum products--Fuels (class F)--Specifications of marine fuels | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(v)(K) | EPA Method 548.1 | 1992 | Endothall by Ion Exchange, Methylation, GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (16) | 40 CFR 136, Appendix D | 2014 | Precision and Recovery Statements for Methods for Measuring Metals | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.354(d)(3) | ASME MFC-16 | 2007 | Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters | American Society of Mechanical Engineers |