Housing and Urban Development Department |
|
24 CFR 200.949(a)(1)(v) |
ISDSI 104 |
1986 |
Water Penetration Performance Standard for Insulated Steel Door Systems
|
Insulated Steel Door Institute |
Housing and Urban Development Department |
|
24 CFR 200.949(a)(1)(ix) |
ASTM F476 |
1991 |
Standard Test Method for Security of Swinging Door Assemblies
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.949(a)(1)(iv) |
ISDSI 102 |
1984 |
Installation Standard for Insulated Door Systems
|
Insulated Steel Door Institute |
Housing and Urban Development Department |
|
24 CFR 200.949(a)(1)(iii) |
ISDSI 101 |
1989 |
Air Infiltration Performance Standard for Insulated Steel Door Systems
|
Insulated Steel Door Institute |
Housing and Urban Development Department |
|
24 CFR 200.949(a)(1)(ii) |
ISDSI 100 |
1990 |
Door Size Dimensional Standard and Assembly Tolerances for Insulated Steel Door Systems
|
Insulated Steel Door Institute |
Housing and Urban Development Department |
|
24 CFR 200.949(a)(1)(i) |
ASTM A591/A 591M |
1989 |
Standard Specification for Steel Sheet, Electrolytic-Zinc Coated, for Light Coating Mass Applications
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(2) |
ASTM D1667 |
1990 |
Standard Specification for Flexible Cellular Materials--Vinyl Chloride Polymers and Copolymers (Closed-cell Foam)
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(2) |
ASTM D2646 |
1979 |
Standard Test Method for Backing Fabrics
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(2) |
ASTM D629 |
1988 |
Standard Test Method for Quantitative Analysis of Textiles
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(2) |
ASTM D3574 |
1991 |
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(2) |
ASTM D3676 |
1983 |
Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(1)(v) |
ASTM D3676 |
1978 |
Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(1)(iv) |
ASTM D3574 |
1991 |
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(1)(iii) |
ASTM D629 |
1988 |
Standard Test Method for Quantitative Analysis of Textiles
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(1)(ii) |
ASTM D2646 |
1987 |
Standard Test Method for Backing Fabrics
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.948(a)(1)(i) |
ASTM D1667 |
1990 |
Standard Specification for Flexible Cellular Materials--Vinyl Chloride Polymers and Copolymers (Closed-cell Foam)
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.947(a)(2) |
ASTM C578 |
1992 |
Standard Specification for Preformed, Cellular Polystyrene Thermal Insulation
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.947(a)(1) |
ASTM C578 |
1992 |
Standard Specification for Preformed, Cellular Polystyrene Thermal Insulation
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM D3273 |
1991 |
Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM E330 |
1990 |
Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
UEATC Publication |
1988 |
UEATC Directives for the Assessment of External Insulation Systems for Walls (expanded Polystyrene Insulation Faced with a Thin Rendering), section 3.3.3.3.
|
European Union of Agreement Technical Committee |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM E695 |
1991 |
Standard Method of Measuring Relative Resistance of Wall, Floor and Roof Construction to Impact Loading
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM G26 |
1993 |
Standard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
CABO Model Energy Code |
1992 |
Model Energy Code
|
Council of American Building Officials |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
EIMA Test Method 101.01 |
1995 |
Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS), Class PB (modified ASTM C67-91)
|
Exterior Insulation Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
EIMA Test Method 101.02 |
1995 |
Standard Test Method for Resistance to Water of Exterior Insulation and Finish Systems (EIFS), Class PB (modified ASTM E331-91)
|
Exterior Insulation Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
EIMA Test Method 101.03 |
1995 |
Standard Test Method for Determining the Tensile Adhesion Strength of an Exterior Insulation and Finish System (EIFS), Class PB (modified ASTM C297-91)
|
Exterior Insulation Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
EIMA Test Method 105.01 |
1995 |
Standard Test Method for Alkali Resistance of Glass Fiber Reinforcing Mesh for Use in Exterior Insulation and Finish Systems (EIFS), Class PB
|
Exterior Insulation Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASCE 7 |
1993 |
Minimum Design Loads for Buildings and Other Structures
|
American Society of Civil Engineers |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM C150 |
1994 |
Standard Specification for Portland Cement
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM C920 |
1987 |
Standard Specification for Elastomeric Joint Sealants
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM C1186 |
1991 |
Standard Specification for Flat Non-Asbestos Fiber Cement Sheets
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM D579 |
1990 |
Standard Specification for Greige Woven Glass Fabrics
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(xv) |
UEATC Publication |
1988 |
Directives for the Assessment of External Insulation Systems for Walls (expanded Polystyrene Insulation Faced with a Thin Rendering) Section 3.3.3.3
|
European Union of Agreement Technical Committee |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(xiv) |
EIMA Test Method 105.01 |
1995 |
Standard Test Method for Alkali Resistance of Glass Fiber Reinforcing Mesh for Use in Exterior Insulation and Finish Systems (EIFS), Class PB
|
Exterior Insulation Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(xiii) |
EIMA Test Method 101.03 |
1995 |
Standard Test Method for Determining the Tensile Adhesion Strength of an Exterior Insulation and Finish System (EIFS), Class PB (modified ASTM C297-91)
|
Exterior Insulation Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(xii) |
EIMA Test Method 101.02 |
1995 |
Standard Test Method for Resistance to Water of Exterior Insulation and Finish Systems (EIFS), Class PB (modified ASTM E331-91)
|
Exterior Insulation Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(xi) |
EIMA Test Method 101.01 |
1995 |
Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS), Class PB (modified ASTM C67-91)
|
Exterior Insulation Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(x) |
CABO Model Energy Code |
1993 |
Model Energy Code
|
Council of American Building Officials |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(viii) |
ASTM E695 |
1991 |
Standard Method of Measuring Relative Resistance of Wall, Floor and Roof Construction to Impact Loading
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(vii) |
ASTM E330 |
1990 |
Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(vi) |
ASTM D3273 |
1991 |
Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(v) |
ASTM D579 |
1990 |
Standard Specification for Greige Woven Glass Fabrics
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(ix) |
ASTM G26 |
1993 |
Standard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(iv) |
ASTM C1186 |
1991 |
Standard Specification for Flat Non-Asbestos Fiber Cement Sheets
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(iii) |
ASTM C920 |
1987 |
Standard Specification for Elastomeric Joint Sealants
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(ii) |
ASTM C150 |
1994 |
Standard Specification for Portland Cement
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(i) |
ASCE 7 |
1993 |
Minimum Design Loads for Buildings and Other Structures
|
American Society of Civil Engineers |
Housing and Urban Development Department |
|
24 CFR 200.945(b) |
UM Bulletin 44d |
1978 |
HUD/FHA Standard for Carpet and Carpet Certification Program with Addendum 1 and 2
|
U.S. Department of Housing and Urban Development |
Housing and Urban Development Department |
|
24 CFR 200.945(a)(2) |
AATCC 16E |
1982 |
Colorfastness to Light: Water-Cooled Xenon-Arc Lamp, Continuous Light
|
American Association of Textile Chemists and Colorists |