This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort ascending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Rural Utilities Service | 7 CFR 1755.910(e)(3)(viii) | ASTM D1693 | 1988 | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics reapproved 1988 | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(vii) | ASTM G21 | 1990 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(vi) | ASTM D1654 | 1992 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(vi) | ASTM B117 | 1990 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(vi) | ASTM D610 | 1989 | Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(iv) | ASTM D822 | 1989 | Standard Practice for Conducting Tests on Paint and Related Coatings and Materials Using Filtered Open-Flame Carbon-Arc Light and Water Exposure Apparatus | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(iv) | ASTM G23 | 1990 | Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(iii) | ASTM D2247 | 1992 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(6)(iv) | ASTM D3928 | 1989 | Standard Test Method for Evaluation of Gloss and Sheen Uniformity | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(6)(iii) | ASTM D523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(6)(ii) | ASTM A526/A 526M | 1990 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(x) | ASTM A153 | 1987 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(viii)(B) | ASTM A366/A 366M | 1991 | Standard Specification for Steel, Sheet, Carbon, Cold-rolled, Commercial Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(viii)(A) | ASTM A109 | 1991 | Standard Specification for Steel, Strip, Carbon Cold-Rolled | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vii)(B) | ASTM A621/A 621M | 1992 | Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Drawing Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vii)(A) | ASTM A569/A 569M | 1991 | Standard Specification for Steel, Carbon (0.15 Maximum Percent), Hot-Rolled Sheet and Strip, Commercial Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vi)(D) | ASTM A526/A 526M | 1990 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vi)(C) | ASTM A525 | 1991 | Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vi)(B) | ASTM A366/A 366M | 1991 | Standard Specification for Steel, Sheet, Carbon, Cold-rolled, Commercial Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vi)(A) | ASTM A109 | 1991 | Standard Specification for Steel, Strip, Carbon Cold-Rolled | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(ix) | ASTM B633 | 1985 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(iv) | ASTM G21 | 1990 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(3)(xv) | ASTM A525 | 1991 | Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(b)(4) | NFPA 70 | 2013 | National Electrical Code | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.910(b)(4) | UL Standards | 2020 | UL Standards | Underwriters Laboratories, Inc. | |
Rural Utilities Service | 7 CFR 1755.910(b)(4) | OSHA Standards | 2012 | OSHA Standards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A525 | 1991 | Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM B539 | 1990 | Standard Test Method for Measuring Contact Resistance of Electrical Connections (Static Contacts) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A526/A 526M | 1990 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A569/A 569M | 1991 | Standard Specification for Steel, Carbon (0.15 Maximum Percent), Hot-Rolled Sheet and Strip, Commercial Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A621/A 621M | 1992 | Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Drawing Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A366/A 366M | 1991 | Standard Specification for Steel, Sheet, Carbon, Cold-rolled, Commercial Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A109 | 1991 | Standard Specification for Steel, Strip, Carbon Cold-Rolled | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A153 | 1987 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D2197 | 1991 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D1693 | 1988 | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D1535 | 1989 | Specifying Color by the Munsell System | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D3928 | 1989 | Standard Test Method for Evaluation of Gloss and Sheen Uniformity | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM G21 | 1990 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D1654 | 1992 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D822 | 1989 | Standard Practice for Conducting Tests on Paint and Related Coatings and Materials Using Filtered Open-Flame Carbon-Arc Light and Water Exposure Apparatus | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D2794 | 1992 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM G23 | 1990 | Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D2565 | 1992 | Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus With or Without Water for Exposure of Plastics | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM B117 | 1990 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D2247 | 1992 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D4568 | 1986 | Standard Test Method for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM B633 | 1985 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D610 | 1989 | Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces | ASTM International |