U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Standards.gov

Standards Incorporated by Reference (SIBR) Database

Download PDF

If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.

SUBSCRIBE

DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.

NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.

Displaying 23901 - 23950 of 27098
Export results (CSV)
Incorporated by (Agency) FR Citation CFR Citation Document Number Document Edition / Year Title of Standard Standard Publishing Organization
Research and Special Programs Administration 49 CFR 178.516(b)(1) ISO 535 1991 Paper and Board--Determination of Water Absorptiveness--Cobb Method International Organization for Standardization
Research and Special Programs Administration 49 CFR 178.53(d) CGA C-3 1994 Standard for Welding and Brazing on Thinned Walled Containers Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.53(j)(5)(i) ASTM E 8 1999 Standard Test Methods for Tension Testing of Metallic Materials ASTM International
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.55(d)(3) CGA C-3 1994 Standard for Welding on Thin-Walled Steel Cylinders Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.55(k)(3)(i) ASTM E 8 1999 Standard Test Methods for Tension Testing of Metallic Materials ASTM International
Research and Special Programs Administration 49 CFR 178.56(d)(3) CGA C-3 1994 Standard for Welding and Brazing on Thinned Walled Containers Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.56(j)(3)(i) ASTM E 8 1999 Standard Test Methods for Tension Testing of Metallic Materials ASTM International
Research and Special Programs Administration 49 CFR 178.57(d)(5) CGA C-3 1994 Standard for Welding and Brazing on Thinned Walled Containers Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.57(j)(3)(i) ASTM E 8 1999 Standard Test Methods for Tension Testing of Metallic Materials ASTM International
Research and Special Programs Administration 49 CFR 178.57(l)(4)(v) ASTM E 23 1998 Standard Test Method for Notched Bar Impact Testing of Metallic Materials ASTM International
Research and Special Programs Administration 49 CFR 178.57(o)(1) ASTM A 240/A 240M 1994 Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels ASTM International
Research and Special Programs Administration 49 CFR 178.58(d)(1) CGA C-3 1994 Standard for Welding and Brazing on Thinned Walled Containers Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.58(m)(5)(i) ASTM E 8 1999 Standard Test Methods for Tension Testing of Metallic Materials ASTM International
Research and Special Programs Administration 49 CFR 178.59(d) CGA C-3 1994 Standard for Welding and Brazing on Thinned Walled Containers Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.59(j)(3)(i) ASTM E 8 1999 Standard Test Methods for Tension Testing of Metallic Materials ASTM International
Research and Special Programs Administration 49 CFR 178.59(l)(1)(v) CGA C-12 1994 Qualification Procedure for Acetylene Cylinder Design Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.60(d) CGA C-3 1994 Standard for Welding and Brazing on Thinned Walled Containers Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.60(l)(3)(i) ASTM E 8 1999 Standard Test Methods for Tension Testing of Metallic Materials ASTM International
Research and Special Programs Administration 49 CFR 178.60(p)(1)(v) CGA C-12 1994 Qualification Procedure for Acetylene Cylinder Design Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.601(g)(8) ASTM A 568/A 568M 1995 Standard Specification for General Requirements for Steel Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled ASTM International
Research and Special Programs Administration 49 CFR 178.601(g)(8) ASTM A 366/A 366M 1991 Standard Specification for Steel: Sheet, Carbon, Cold-Rolled, Commercial Quality ASTM International
Research and Special Programs Administration 49 CFR 178.61(d)(4) CGA C-3 1994 Standard for Welding and Brazing on Thinned Walled Containers Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.61(j)(3)(i) ASTM E 8 1999 Standard Test Methods for Tension Testing of Metallic Materials ASTM International
Research and Special Programs Administration 49 CFR 178.65(b)(2) AA Publication 1982 Aluminum Standards and Data, Seventh Edition Aluminum Association
Research and Special Programs Administration 49 CFR 178.65(c)(4) CGA C-3 1994 Standard for Welding and Brazing on Thinned Walled Containers Compressed Gas Association
Research and Special Programs Administration 49 CFR 178.68(j)(3)(i) ASTM E 8 1999 Standard Test Methods for Tension Testing of Metallic Materials ASTM International
Research and Special Programs Administration 49 CFR 178.68(l)(2) CGA C-3 1994 Standard for Welding and Brazing on Thinned Walled Containers Compressed Gas Association
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.707(c)(4)(iv)(A) ISO 535 1991 Paper and Board--Determination of Water Absorptiveness--Cobb Method International Organization for Standardization / International Electrotechnical Commission
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.708(c)(2) ISO 535 1991 Paper and Board--Determination of Water Absorptiveness--Cobb Method International Organization for Standardization / International Electrotechnical Commission
Research and Special Programs Administration 49 CFR 178.708(c)(2)(i) ISO 3036 1975 Board-Determination of Puncture Resistance International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(d)(2) ISO 10297 1999 Gas cylinders--Refillable gas cylinder valves--Specification and type testing International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(g)(1) ISO 9809-1 1999 Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa, International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(g)(2) ISO 9809-2 2000 Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(g)(3) ISO 9809-3 2000 Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(h) ISO 7866 1999 Gas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders--Design, Construction and Testing International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(i) ISO 11118 1999 Gas cylinders--Non-refillable metallic gas cylinders--Specification and test methods International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(j) ISO 11120 1999 Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(k)(2) ISO 3807-2 2000 Cylinders for acetylene--Basic requirements--Part 2: Cylinders with fusible plugs International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(l)(1)(i) ISO 11119-1 2002 Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 1: Hoop-wrapped composite gas cylinders International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(l)(1)(ii) ISO 11119-2 2002 Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(l)(1)(iii) ISO 11119-3 2002 Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(m)(1) ISO 11114-1 1997 Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(m)(2) ISO 11114-2 2000 Transportable gas cylinders-- Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.71(r)(2) ISO 7225 2005 Gas Cylinders--Precautionary Labels International Organization for Standardization
Research and Special Programs Administration 49 CFR 178.74(c)(5)(ii) ISO 1496-3 1995 Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.75(d)(3)(i) ISO 9809-1 1999 Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa, International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.75(d)(3)(ii) ISO 11120 1999 Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.75(d)(3)(ii) ISO 9809-2 2000 Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.75(d)(3)(iii) ISO 9809-3 2000 Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders International Organization for Standardization
Pipeline and Hazardous Materials Safety Administration 49 CFR 178.75(h)(4)(iv) ISO 1496-3 1995 Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk International Organization for Standardization

Accessing Standards Incorporated by Reference

This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).

More information