This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 40 CFR 60.41b Pulverized coal-fired steam generating unit (Residual oil) | ASTM D 396 | 1978 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 160.115-7(a)(2) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B1.20.1 | 1983 | Pipe Threads, General Purpose (Inch) | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 164.03(b) | IMO SOLAS | 2002 | Conference resolution 1, Adoption of amendments to the Annex to the International Convention for the Safety of Life at Sea, 1974, and amendments to Chapter V of SOLAS 1974, adopted December 12, 2002 | International Maritime Organization | |
Coast Guard | 46 CFR 177.410(b)(4) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 160.135-5(b)(11) | ASTM D 4029 | 2009 | Standard Specification for Finished Woven Glass Fabrics | ASTM International | |
Coast Guard | 46 CFR 160.151-21(h) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 21 CFR 178.3870(f)(6)(iv) | FDA Publication | 1989 | Determination of Phenolic Modification of Rosin Derivatives | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 33 CFR 154, Appendix B, 3.3.2 | MSC Circular 373 | 1988 | Revised Standards for the Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 175.600(b) Table | IMO Resolution A.688(17) | 1991 | Fire Test Procedures for Ignitability of Bedding Components | International Maritime Organization | |
Coast Guard | 46 CFR 119.440 Table 119.440(a)(1) | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 160.151-15(c) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(d)(2) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IF (Acetonitrile) | ASTM D 3371 | 1995 | Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography | ASTM International | |
Coast Guard | 46 CFR 161.006-1(a)(3) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Coast Guard | 46 CFR 52.05-1(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 156.111(b) | OCIMF Publication | 1989 | Ship to Ship Transfer Guide (Petroleum) | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC E-9 | 1990 | Direct Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.170-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural | ASTM International | |
Coast Guard | 46 CFR 58.50-10 Table 58.50-10(a) | ASTM B 127 | 1998 | Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip | ASTM International | |
Coast Guard | 46 CFR 183.420 | UL 1104 | 1974 | Standard for Marine Navigation Lights | Underwriters Laboratories, Inc. | |
Coast Guard | 27 CFR 21.65(b)(1) 244 | National Formulary | 1980 | Formula No. 38-B | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 162.060-5(d)(1) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 102.23(c)(5) | USDA Handbook 29 | 1968 | Title not found | U.S. Department of Agriculture | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-7 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 7: Increased Safety “e”, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 162.060-26(a) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 36 CFR 1237.3(d)(1) | NFPA 40 | 2007 | Standard for the Storage and Handling of Cellulose Nitrate Motion Picture Film | National Fire Protection Association | |
Coast Guard | 46 CFR 164.120-5(d)(2) | ISO 175:1999(E) | 1999 | Plastics—Methods of test for the determination of the effects of immersion in liquid chemicals, Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 177.1030(b) | ANSI Z26.1 | 1977 | Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Coast Guard | 46 CFR 15.1105(c)(2) | STCW Code | 1978 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 54.01-1(d)(1) | CGA S-1.2.5.2 | 1979 | Flow Test of Safety Relief Valves | Compressed Gas Association | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(4)(ii) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.151-15(a) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 182.440(a)(2)(ii) | UL 1102 | 1992 | Non integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.30-5(c)(1) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 179/A 179M | 1990 | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes | ASTM International | |
Coast Guard | 46 CFR 160.049-1(a)(1) | FedSpec CCC-C-700G | 1986 | Cloth, Coated, Vinyl, Coated (Artificial Leather) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 52.05-30(b) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 12 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 320/A 320M | 1997 | Standard Specification for Alloy-Steel Bolting Materials for Low-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 164.023-5 Table 164.023-5(a) | FedSpec V-T-285E | 1986 | Thread, Polyester | Federal Specifications Standards and Test Methods | |
Coast Guard | 33 CFR 96.130(b) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 98.01-3(b) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section V, Nondestructive Examination | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 183.620(a)(5)(ii)(Note) | ASTM D 471 | 1996 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (2) | APHA Method 3111 C | 1999 | Metals by Flame Atomic Absorption, Extraction and Direct Aspiration | American Public Health Association | |
Coast Guard | 40 CFR 58 Appendix A, 6.0 (2) | EPA-240-B-01-002 | 2001 | EPA Requirements for Quality Management Plans, EPA QA/R-2 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 110.15-1(b), Dripproof | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | IMO Resolution A.760(18) | 1983 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 111.105-15(a) | IEC 60079-5 | 1997 | Electrical Apparatus for Explosive Gas Atmospheres—Part 5: Powder Filling “q”, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.171-17(p) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International |