This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 200.955(a)(1) | AAMA/NWWDA 101/I.S. 2 | 1997 | Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors | American Architectural Manufacturers Association | |
Rural Utilities Service | 7 CFR 1755.503(c) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Minerals Management Service | 30 CFR 250.1708(a)(1) | API RP 53 | 1997 | Recommended Practices for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.860(j)(5)(ii) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-17(b) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-48 | 1976 | Specification for Runway and Taxiway Edge Lights | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 52.01-120(d)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (42) | ASTM D 4839 | 2003 | Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.110(a)(13) | Drawing No. SA-SID-M081 | 1987 | Leg Assembly, Left | Reprographic Technologies | |
Coast Guard | 33 CFR 155.1050(k)(2)(iv) | ASTM F 1737 | 2007 | Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems | ASTM International | |
Coast Guard | 40 CFR 60.562–2(d) | ASTM D 86 | 1995 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(b)(9) | ASTM E 260 | 1985 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(c) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.151-15(f) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.41(j) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 13 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(AA) | EPA Method 1661 | 1992 | Bromoxynil by Direct Injection and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(24) | SAE J-2403 | 2007 | Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature—Truck and Bus | Society of Automotive Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. P, 2 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.2201(a)(3)(i) | TXUIC regulations | 1981 | Amendment to 16 TAC section 3.9 (section .051.02.02.009) issued December 21, 1981, effective April 1, 1982 | State of Texas | |
Environmental Protection Agency | 40 CFR 63.11162(f)(4) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1797 | 2009 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks | ASTM International | |
Food and Drug Administration | 21 CFR 178.3910(a)(2) | ASTM D 88 | 1981 | Standard Test Method for Saybolt Viscosity | ASTM International | |
Coast Guard | 46 CFR 160.151-5(d)(2) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 195.3(c) B6 | API 650 | 1998 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b)(1)(iii)(B) | ANSI Addenda B31.1 | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Coast Guard | 46 CFR 128.310(a) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1630.62(d)(3) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Coast Guard | 46 CFR 118.410(g)(2) | UL 1058 | 1989 | Halogenated Extinquishing System Units as amended through April 19, 1994 | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.74(a) | Drawing No. SA-6C-1610-1 | 1996 | Screw Button Head Socket | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Tert-butyl-alcohol) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Labor Department | 41 CFR 50-204.69 | CGA G-8.1 | 1964 | Standard for the Installation of Nitrous Oxide Systems at Consumer Sites | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 176.5(b)(8) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 61.18(c)(1) | ANSI N13.1 | 1969 | Guide to Sampling Airborne Radioactive Materials in Nuclear Facilities | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 300.915(c)(8) | ASTM D 1293 | 1990 | Standard Test Method for Pour Point of Petroleum Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(49) | ANSI Z9.1 | 1951 | Safety Code for Ventilation and Operation of Open Surface Tanks | American National Standards Institute | |
Health and Human Services Department | 45 CFR 162.920(a)(1) | ASC X12N 837 | 2002 | Addenda to Health Care Claim: Dental, version 4010 | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.517(g)(1) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (87) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Free Chlorine) | APHA Method 4500-Cl E | 2014 | Chlorine by Low-Level Amperometric Direct Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix D, Purpose and Background | NRC Guide 3.59 | 1987 | Methods for Estimating Radioactive and Toxic Airborne Source Terms for Uranium Milling Operations | U.S. Nuclear Regulatory Commission | |
Food and Drug Administration | 21 CFR 180.37(b) | Food Chemicals Codex | 1981 | Saccharin, Ammonium Saccharin, Calcium Saccharin, and Sodium Saccharin | National Academy Press | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | USGS I-2700-85 | 1989 | Silica, colorimetric, molybdate blue, automated-segmented flow | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60.251(d)(2) Coal | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(a)(3) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(i)(3)(ii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | AWS D1.1 | 1973 | Structural Welding Code--Steel | American Welding Society | |
Housing and Urban Development Department | 24 CFR 203.43f(d)(ii) | HUD Handbook 4905.1 | 1997 | Requirements for Existing Housing—One to Four Family Living Units | U.S. Department of Housing and Urban Development | |
Coast Guard | 46 CFR 160.047-1(b) | Drawing No. 160.047-1, Sheet 1, Rev. 2 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child--Cutting Pattern and General Arrangement, Models AK-1, and AF-1 | U.S. Coast Guard |