This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.023-4(b)(1) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(b)(25)(i) | NCASI Technical Bulletin 253 | 1971 | An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(2) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1500.49 (e)(3) | MIL-I-23594B | 1971 | Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive | Defense Standardization Program, Department of Defense | |
Coast Guard | 29 CFR 1926.6(dd)(14) | SAE J-396 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 12.5.3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-475A | 1971 | Floor Covering Vinyl, Surface Tile and Roll, with Backing including Amendment 2 | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.023-5(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ANSI MH5.1 | 1971 | Basic Requirements for Cargo Containers | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-529B | 1971 | Insulation Board, Thermal (Mineral Aggregate) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 103, 6.1.3 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5370-7 | 1971 | Airport Construction Controls to Prevent Air Water Pollution | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ASAE S276.2 | 1971 | Emblem for Identifying Slow Moving Vehicles | American Society of Agricultural Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (7) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 229.51(b) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.156 | ANSI/NFPA 1971 | 1971 | Protective Clothing for Structural Fire Fighters | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1728.97(a)(5) | RUS Bulletin 50–23 (DT–18) | 1971 | RUS Specification for 60-inch Wood Crossarm Braces | Rural Utilities Service, U.S. Department of Agriculture | |
Mine Safety and Health Administration | 30 CFR 75.1107-13(b) | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.58a(h)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.21(d) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429f | 1971 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5370-7 | 1971 | Airport Construction Controls to Prevent Air Water Pollution | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.268(i)(1) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ANSI B114.1 | 1971 | Emblem for Identifying Slow Moving Vehicles | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429e | 1971 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (8) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.67(c)(3) | SAE J-476 | 1971 | Dryseal Pipe Threads | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(12) | SAE J-394 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 75.1107-16(b) | NFPA 13A | 1971 | Care and Maintenance of Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 289.1 | 1971 | Zinc (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-44A | 1971 | Specification for L-858 Retroreflective Taxiway Guidance Sign | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 220.1 | 1971 | Copper (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(2) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-21 | 1971 | Airport Miscellaneous Lighting Visual Aids | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.023-4(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(v) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(17) | ASTM D 93 | 1971 | Test for Flash Point by Pensky Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 60.1320(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.222 S6.7.2 | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-44A | 1971 | Specification for L-858 Retroreflective Taxiway Guidance Sign | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(3) | SAE J-166 | 1971 | Trucks and Wagons | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-21 | 1971 | Airport Miscellaneous Lighting Visual Aids | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 61.18(a)(10) | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International |