This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Transportation Department | 85 FR 27810 | 49 CFR 176 | ISO 11118:2015(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 86.1(d)(1)(i) | LEV III Exhaust Emission Standards | 2015 | Title 13, Division 3, Chapter 1, Article 2 Approval of Motor Vehicle Pollution Control Devices (New Vehicles), §1961.2 Exhaust Emission Standards & Test Procedures—2015 & Subsequent Model Passenger Cars, Light-Duty Trucks, & Medium-Duty Vehicles | California Air Resources Board | |
Environmental Protection Agency | 40 CFR 435.41(y) | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.6675 Backup power for renewable | Alaska Statute 42.45.045 | 2015 | Renewable energy grant fund and recommendation program | State of Alaska | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | ASTM F2876-10(2015) | 2015 | Update to Electrical Engineering Regulations | ASTM International |
Transportation Department | 85 FR 27810 | 49 CFR 180 | ISO 11120:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Nuclear Regulatory Commission | 85 FR 26540 | 10 CFR 50 | ASME BPVC CC N–729–6 | 2015 | American Society of Mechanical Engineers 2015-2017 Code Editions Incorporation by Reference | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | EPA Method 1631E | 2015 | Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, Revision E | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 6 | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 1065 | ASTM D86–12 | 2015 | Fuels Regulatory Streamlining | ASTM International |
Transportation Department | 85 FR 27810 | 49 CFR 173 | UN Manual of Tests and Criteria Rev. 6/Amend. 1 | 2015 | Hazardous Materials: Harmonization With International Standards | United Nations |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 5364 | 2015 | Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units | ASTM International | |
Environmental Protection Agency | 40 CFR 98.464(b)(4)(i)(E) | APHA Method 2540 G | 2015 | Total, Fixed, and Volatile Solids in Solid and Semisolid Samples NDG | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.11(e) | EPA Method 1647 | 2015 | Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995 | U.S. Environmental Protection Agency | |
Energy Department | 87 FR 63588 | 10 CFR 431 | IEC 60079-7:2015 | 2015 | Energy Conservation Program: Test Procedure for Electric Motors | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 435 Appendix 4, Subpart A | EPA Method 1647 | 2015 | Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 84 FR 7682 | 40 CFR 63 | ASTM D2369-10(2015)e1 | 2015 | National Emission Standards for Hazardous Air Pollutants: Surface Coating of Wood Building Products Residual Risk and Technology Review | ASTM International |
Transportation Department | 85 FR 27810 | 49 CFR 176 | ISO 11120:2015(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 2.1.2 | CGA S-1.1 | 2015 | Pressure Relief Device Standard Part 1—Cylinders for Compressed Gases | Compressed Gas Association | |
Transportation Department | 85 FR 27810 | 49 CFR 180 | ISO 11623:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | UL 2556 2015 | 2015 | Update to Electrical Engineering Regulations | Underwriters Laboratories, Inc. |
Environmental Protection Agency | 40 CFR 435.15 Note 8 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 6 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 86 FR 15587 | 40 CFR 82 | SAE J2851-2915 | 2015 | Protection of the Stratospheric Ozone: Motor Vehicle Air Conditioning System Servicing | Society of Automotive Engineers |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | CSA–C22.2 No. 0–10 | 2015 | Update to Electrical Engineering Regulations | Canadian Standards Association |
Interior Department | 84 FR 21908 | 30 CFR 250 | API Bulletin 92L, 1st Edition | 2015 | Oil and Gas and Sulfur Operations in the Outer Continental Shelf-Blowout Preventer Systems and Well Control Revisions | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 272, Subpart VV | VAHWMP | 2015 | Commonwealth of Virginia Hazardous Waste Management Program (Reserved) | Commonwealth of Virginia | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.1.4 | APHA Method 601 | 2015 | Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere | American Public Health Association | |
Environmental Protection Agency | 40 CFR 433.11 | 40 CFR Part 401 | 2015 | General Provisions | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435 Appendix 5, Subpart A | EPA Method 1655 | 2015 | Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS) | U.S. Environmental Protection Agency | |
Transportation Department | 85 FR 27810 | 49 CFR 176 | ISO 11623:2015(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 435.41(ee) | EPA Method 1619 | 2015 | Suspended Particulate Phase (SPP) Toxicity Test | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429g | 2015 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 63.14(k)(12) | Alaska Statute 42.45.045 | 2015 | Renewable energy grant fund and recommendation program | State of Alaska | |
Transportation Department | 85 FR 8104 | 49 CFR 192 | API RP 1171 | 2015 | Pipeline Safety: Safety of Underground Natural Gas Storage Facilities | American Petroleum Institute |
Transportation Department | 85 FR 27810 | 49 CFR 172 | ISO 17871:2015(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 435.15 Note 6 | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(1)(i) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Environmental Protection Agency | 86 FR 15587 | 40 CFR 82 | SAE J3030-2015 | 2015 | Protection of the Stratospheric Ozone: Motor Vehicle Air Conditioning System Servicing | Society of Automotive Engineers |
Transportation Department | 85 FR 27810 | 49 CFR 171 | UN Manual of Tests and Criteria Rev. 6/Amend. 1 | 2015 | Hazardous Materials: Harmonization With International Standards | United Nations |
Environmental Protection Agency | 40 CFR 433.11 | 40 CFR Part 136 | 2015 | Guidelines Establishing Test Procedures for the Analysis of Pollutants | U.S. Environmental Protection Agency | |
Energy Department | 88 FR 17934 | 10 CFR 429 | ANSI/AWWA E103–2015 | 2015 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Water Works Association |
Environmental Protection Agency | 40 CFR 435 Appendix 6, Subpart A | EPA Method 1670 | 2015 | Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling Fluids (NAF) (GC/MS) | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEEE C37.13–2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Energy Department | 88 FR 27312 | 10 CFR 430 | ANSI/AMCA 240–15 | 2015 | Energy Conservation Program: Test Procedure for Fans and Blowers | Air Movement and Control Association |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEC 60079–5:2015 | 2015 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | CAN/CSA-C22.2 NO. 0-10 (R2015) | 2015 | Update to Electrical Engineering Regulations | Canadian Standards Association |
Environmental Protection Agency | 40 CFR 58 Appendix A, 3.3.4.1 | 40 CFR Part 50, Appendix G | 2015 | Reference Method for the Determination of Lead in Total Suspended Particulate Matter | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 85 FR 49724 | 40 CFR 63 | Method 310 | 2015 | National Emission Standards for Hazardous Air Pollutants: Miscellaneous Coating Manufacturing Residual Risk and Technology Review | State of California, California Air Resources Board |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(15) | ASTM E 318 | 2015 | Standard Test Methods for Chemical Analysis of Molybdenum (Withdrawn 2010) | ASTM International |