This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 572.113 | Drawing No. 78051-303 | 1987 | Neck Assembly, revision E | General Motors Corporation | |
Labor Department | 41 CFR 50-204.66(a) | CGA G-1 | 1966 | Acetylene | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 173.21(f)(3)(ii) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Coast Guard | 33 CFR 157.02(b)(5) | IMO Marine Environment Protection Committee Resolu | 2003 | Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60.633(h)(1) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 262.89(d) | OECD Publication | 2009 | Annex B (Green List) of the 2009 Guidance Manual for the Implementation of Council Decision C(2001)107/FINAL, as Amended, on the Control of Transboundary Movements of Wastes Destined for Recovery Operations | Organization for Economic Cooperation and Development | |
Coast Guard | 33 CFR 126.15(c)(1) | NFPA 307 | 1995 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 91.225(h)(1) | FAA TSO-C166b | 2009 | Extended Squitter Automatic Dependent Surveillance-Broadcast (ADS-B) and Traffic Information Service-Broadcast (TIS-B) Equipment Operating on the Radio Frequency of 1090 Megahertz (MHz) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (105) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(lxix) | APHA Method 9223 | 2004 | Enzyme Substrate Coliform Test | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, A | ASTM E 1148 | 2002 | Standard Test Method for Measurements of Aqueous Solubility | ASTM International | |
Environmental Protection Agency | 40 CFR 98.244(b)(1) | NIST Handbook 44 | 2009 | Specifications, Tolerances, and Other Technical Requirements For Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 1060.810(a) Table 1 | ASTM D 3802 | 2005 | Standard Test Method for Ball-Pan Hardness of Activated Carbon | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (65) | AOAC Method 993.30 | 1998 | Sulfate (as SO4), mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (DCPA [Dimethyl 2,3,5,6-tetrachloro-terephthalate]) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.193(i)(2) Note | API Publication | 1981 | Guide for Inspection of Refining Equipment, Chapter XIII, Atmospheric and Low Pressure Storage Tanks, 4th edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.997(e)(2)(iii)(D)(1) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Food and Drug Administration | 21 CFR 172.859(b)(11) | FDA Publication | 1977 | Determination of Isobutyl Alcohol | Food and Drug Administration, U.S. Department of Health and Human Services | |
Energy Department | 10 CFR 434.403.2.9.3 | SMACCNA Publication | 1995 | HVAC Duct Construction Standards -- Metal and Flexible (RS-34) | Sheet Metal and Air Conditioning Contractors' National Association | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | ASME All Standards | 2013 | All specifications, standards and codes without specific reference | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | TCA Publication | 1993 | Handbook for Ceramic Tile Installation | Tile Council of America | |
Coast Guard | 40 CFR 60, Appendix A-3, Method 5, Section 7.1.3 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Coast Guard | 46 CFR 63.25-9(f)(6) | ISO 9096 | 2003 | Stationary source emissions—Manual determination of mass concentration of particulate matter, Second edition | International Organization for Standardization | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.4.1 | 1993 | Water Heater Relief Valve Drain Tubes | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.141 Table A | Drawing No. 210-6000-2(R) | 2001 | Arm Assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 39.2001(i)(5)(i) | ANSI B16.5 | 1981 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.4965(a)(3) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(31) | API MPMS | 2008 | Chapter 10, Section 3 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 61.107(d)(2)(ii) | ANSI/HPS N13.1 | 1999 | Sampling and Monitoring Releases of Airborne Radioactive Substances From the Stacks and Ducts of Nuclear Facilities | American National Standards Institute | |
Coast Guard | 46 CFR 160.170-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (7) | ASTM D 5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.707(c)(1)(v) | EPA-821-R-99-006 | 1999 | Cryptosporidium and Giardia in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 5, 4(c) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.2.3 | ASTM D 4057 | 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | ASTM International | |
Food and Drug Administration | 21 CFR 184.1446(b) | Food Chemicals Codex | 1981 | Manganese Chloride | National Academy Press | |
Federal Communications Commission | 47 CFR 73.682(d) | ATSC A/65C | 2006 | ATSC Program and System Information Protocol for Terrestrial Broadcast and Cable | Advanced Television Systems Committee | |
National Highway Traffic Safety Administration | 49 CFR 572.137(j) | Part No. 880105-000 | 2013 | Parts List and Drawings, Part 572 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (HIII-5F, Alpha Version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table Note 4 | EPA Method 515.1 | 1995 | Chlorinated acids Liquid/Liquid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(i) | ASTM D 1946 | 2006 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Federal Communications Commission | 47 CFR 67.3(b)(1) | RFC 4103 | 2005 | Request for Comments (RFC) 4103, Real-time Transport Protocol Payload for Text Conversation | Internet Engineering Task Force | |
Occupational Safety and Health Administration | 29 CFR 1910.265(d)(2)(i)(A) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 3675 | 1998 | Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method | International Organization for Standardization | |
Mine Safety and Health Administration | 30 CFR 56.14131(d) | SAE J-386 | 1993 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 121.240(b) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S9.3.5 | SAE J-941b | 1969 | Motor Vehicle Driver's Eye Range | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.903(p)(1) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | International Telecommunication Union--Telecommunication | |
Coast Guard | 46 CFR 160.005-4(d) | Drawing No. 160.005-1 (Sheet 4) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(a) | ANSI B30.5 | 1968 | Safety Code for Crawler, Locomotive and Truck Cranes | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-89 | 1978 | Upper Torso Assembly | General Motors Corporation | |
Research and Special Programs Administration | 49 CFR 178.61(d)(4) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association |