This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropyl acetate) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (7) | ASTM D 4382 | 2002 | Barium by Graphite Furnace Atomic Absorption | ASTM International | |
Coast Guard | 46 CFR 56.01-2(k)(14) | MSS SP-73 | 1996 | Brazing Joints for Copper and Copper Pressure Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Occupational Safety and Health Administration | 29 CFR 1926.603(a)(1) | ASME B&PV Code | 1968 | Power Boilers, Section I | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 592 | 1980 | Blanket Insulation and Blanket Type Pipe Insulation (Metal-mesh Covered) (Industrial Type) | ASTM International | |
Environmental Protection Agency | 40 CFR 87.1, ICAO Annex 16 | ICAO Annex 16 | 2008 | Environmental Protection, Volume II—Aircraft Engine Emissions, Third Edition | International Civil Aviation Organization | |
Rural Utilities Service | 7 CFR 1755.902(f)(6) | ASTM D 4566 | 1998 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.85(b)(1) | Drawing No. LP 1049/A | 1979 | 9-month old Child Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.14(g)(5) | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(168) | ASTM D 5287 | 2002 | Standard Practice for Automatic Sampling of Gaseous Fuels | ASTM International | |
Food and Drug Administration | 21 CFR 172.736(b)(3) | AOCS Method Ca 18c-91 | 1995 | Determination of Lead by Direct Graphite Furnace Atomic Absorption Spectrophotometry | American Oil Chemists Society | |
Veterans Affairs Department | 38 CFR 17.74(f) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 36 Appendix G G36.105(c) | IEC 651 | 1979 | Sound Level Meters | International Civil Aviation Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (99) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM Annual Book of Standards | 2004 | Water and Environmental Technology, Section 11.01 | ASTM International | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 975 | 1996 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Defense Department | 32 CFR 2002.14(c)(4) | NIST SP 800-53 | 2013 | Security and Privacy Controls for Federal Information Systems and Organizations | National Institute of Standards and Technology, U.S. Department of Commerce | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5)(ii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Coast Guard | 46 CFR 160.151-21(w)(3) | IMO Resolution A.657(16) | 1989 | Instructions for Action in Survival Craft | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 195.3(c) B5 | API 620 | 2002 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA Method 552.2 | 1995 | Determination of Haloacetic Acids and Dalapon in Drinking Water by Liquid-Liquid Extraction, Derivatization and Gas Chromatography with Electron Capture Detection | U.S. Environmental Protection Agency | |
Labor Department | 41 CFR 50-204.2(a)(1) | 29 CFR 1502 | 2014 | Safety and Health Regulations for Shipbuilding | Occupational Safety and Health Administration, U.S. Department of Labor | |
Research and Special Programs Administration | 49 CFR 173.56(j)(1) | APA 87-1 | 2001 | Standard for Construction and Approval for Transportation of Fireworks and Novelties | American Pyrotechnics Association | |
Coast Guard | 40 CFR 136.3(a) Table IB (31) | EPA Method 351.1 | 1978 | Total Kjeldahl Nitrogen - Automated Phenate | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a) | ASTM A 1008/A 1008M | 2003 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-28C | 1977 | Specification for L-851 Visual Approach Slope Indicators and Accessories | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C1 | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Environmental Protection Agency | 40 CFR 98.244(b)(4)(v) | ASTM D 3176 | 2002 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Coast Guard | 33 CFR 154.106(f)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 59.412(b)(3) | ASTM D 1640 | 1983 | Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.130(e) | 40 CFR 1065.655 | 2012 | Chemical balances of fuel, intake air, and exhaust | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 38.01-5(b) | ASME B&PV Code | 1986 | ASME Boiler and Pressure Vessel Code Section V, Nondestructive Examination | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(12)(i) | ACS Analytical Chemistry | 1977 | Spectrophotometric and Kinetics Investigation of the Berthelot Reaction for the Determination of Ammonia. Patton, C.J. and S.R. Crouch. 49(3):464-469 | American Chemical Society | |
Environmental Protection Agency | 40 CFR 266.106(h) | EPA-450-4-88-010 | 1992 | Screening Procedures for Estimating the Air Quality Impact of Stationary Sources | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1001 Note to In Light Liquid Service | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Energy Department | 10 CFR 430.3(c)(1) | ANSI C78.3 | 1991 | American National Standard for Fluorescent Lamps-Instant-Start and Cold-Cathode Types-Dimensional and Electrical Characteristics | American National Standards Institute | |
Coast Guard | 46 CFR 160.133-13(g)(1) | IMO MSC/Circular 980 | 2001 | Standardized life-saving Appliance Evaluation and Test Report Forms1 | International Maritime Organization | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASME A112.18.1M | 1989 | Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 177.1630(e)(4)(v) | ASTM D 1505 | 1979 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(j)(3) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 56.01-2(e)(43) | ASTM B 16 | 1992 | Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 207.2 | ICC/IBC | 2000 | International Building Code | International Code Council | |
Food and Drug Administration | 21 CFR 178.3297(e) | CC Publication | 1994 | Determination of PAH Content of Carbon Black | Cabot Corporation | |
National Highway Traffic Safety Administration | 49 CFR 572.133(b)(2)(i) | Drawing No. SA-572-S11 | 1987 | Six axis neck transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Dinoseb) | EPA Method 1658 | 1993 | Phenoxy Acid Herbicides by Liquid/Liquid Extraction, Derivitization, and GC/ECD | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 57.14130(h) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.142(a) | Drawing No. 210-1000 | 2001 | Head Assembly | Reprographic Technologies |