This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 175.600(b) Table | ABS Publication | 1978 | Rules for Building and Classing Reinforced Plastic Vessels | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 147.1800(a)(1) | OHUIC regulations | 1978 | Ohio Revised Code Annotated, sections 1509.01 through 1509.22 (Page 1978 and Supp. 1982) | State of Ohio | |
Environmental Protection Agency | 40 CFR 147.950(a)(4)(ii) | LAUIC regulations | 1978 | Supplement to Statewide Order No. 29-M (October 2, 1978) | State of Louisiana | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 78 | 1978 | Polyethylene (PE), Acrylonitrile Butadiene Styrene (ABS), Poly Vinyl Chloride (PVC) and Polybutylene (PB) Plastic Piping for Domestic Cold Water Service | U.S. Department of Housing and Urban Development | |
Coast Guard | 46 CFR 15.1105(a)(1) | STCW Code | 1978 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (59) | EPA Method 267.2 | 1978 | Ruthenium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D 2986 | 1978 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Food and Drug Administration | 21 CFR 178.3690(b)(2) | ASTM D 1386 | 1978 | Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Coast Guard | 46 CFR 160.055-3(j), Table 160.055-3(j) | Federal Standard CCC-T-191 | 1978 | Textile Test Method 5304 | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 46 CFR 25.45-2(b)(3)(iii) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(a) Table IB (32) | USGS I-4403-89 | 1978 | Lead by Graphite Furnace Atomic Absorption | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-89 | 1978 | Upper Torso Assembly | General Motors Corporation | |
Coast Guard | 46 CFR 160.005-1(a)(2) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(I) | EPA Method 253.2 | 1978 | Palladium, Atomic Absorption, Furnace Technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 25.45-2(b)(2) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.052-3(b) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 129 | 1978 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (37) | USGS I-4503-89 | 1978 | Nickel by Graphite Furnace Atomic Absorption | U.S. Geological Survey | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.114(a) | ASTM D 3699 | 1978 | Standard Specification for Kerosine | ASTM International | |
Coast Guard | 46 CFR 160.176-13(y)(1) | Federal Standard 191A | 1978 | Method 5100, Strength and Elongation, Breaking of Woven Cloth: Grab Method | Federal Specifications Standards and Test Methods | |
Food Safety and Inspection Service | 40 CFR 136.3(a) Table IB (36) | USGS I-3492-96 | 1978 | Molybdenum by Graphite Furnace Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 289.2 | 1978 | Zinc (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 178.3690(b)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Coast Guard | 46 CFR 160.055-3(j), Table 160.055-3(j) | Federal Standard CCC-T-191 | 1978 | Textile Test Method 5872 | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 21 CFR 176.170(a)(5) | ASTM D 5 | 1978 | Standard Test Method for Penetration of Bituminous Materials | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.948(a)(1)(v) | ASTM D 3676 | 1978 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay | ASTM International | |
Coast Guard | 7 CFR 1755.522(v)(4) | FedSpec H28 | 1978 | Screw-Thread Standards for Federal Services including Change Notices 1, 2, and 3 | Federal Specifications Standards and Test Methods | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1025 | 1978 | Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications | American Society of Sanitary Engineering | |
Research and Special Programs Administration | 49 CFR 179.300-7(a) | ASTM A 285 | 1978 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (51) | EPA Method 255.2 | 1978 | Platinum (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(J) | EPA Method 255.2 | 1978 | Platinum (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 6 | Federal Standard 191A | 1978 | Textile Test Method 5830, Leaching Resistance of Cloth: Standard Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 164.023-11(b)(1) | Federal Standard 191A | 1978 | Method 4010, Length-Weight Relation; Thread; Yards Per Pound (m/kg) | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.32(a) | Drawing No. 78051-61X | 1978 | Head Assembly, Complete, Revision T | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | USGS I-4243-89 | 1978 | Cobalt by Graphite Furnace Atomic Absorption | U.S. Geological Survey | |
Coast Guard | 46 CFR 160.052-3(b) | Federal Standard 191 | 1978 | Textile Test Method 5630 | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.34(a) | Drawing No. 78051-89 | 1978 | Upper Torso Assembly | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 60.633(h)(1) | ASTM D 86 | 1978 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(81) | ASTM D 2015 | 1978 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Coast Guard | 46 CFR 15.1105(b) | STCW Code | 1978 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 300.915(c)(8) | ASTM D 3278 | 1978 | Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.50 Appendix A | ANSI Z308.1 | 1978 | Minimum Requirements for Industrial Unit-Type First-aid Kits | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. 78051-372 | 1978 | Vinyl Skin Formulation Hybrid III | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (47) | EPA Method 253.2 | 1978 | Palladium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.055-3(j), Table 160.055-3(j) | Federal Standard CCC-T-191 | 1978 | Textile Test Method 5670 | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.33(a) | Drawing No. 78051-90 | 1978 | Neck Assembly, Revision A | General Motors Corporation | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-90 | 1978 | Neck Assembly | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 220.2 | 1978 | Copper (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(K) | EPA Method 265.2 | 1978 | Rhodium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (70) | EPA Method 279.1 | 1978 | Thallium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency |