This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-2(b)(1)(i) | ASTM A 300 | 1958 | Standard Specification for Steel Plates for Pressure Vessels for Service at Low-Temperature | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(b)(72) | EPA-821-R-06-014 | 2006 | Method 1682: Salmonella in Sewage Sludge (Biosolids) by Modified Semisolid Rappaport-Vassiliadis (MSRV) Medium | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102(c)(1) 137 | ISO 8115 | 1986 | Cotton Bale--Dimensions and Density | International Organization for Standardization / International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(d)(1) | Annual Book of Standards | 1985 | Vol. 05.04, Test Methods for Rating Motor, Diesel, Aviation Fuels, A2. Reference Materials and Blending Accessories, A2.3.2, A2.3.3, and A2.7 | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.911(k) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | API 1604 | 1996 | Closures of Underground Petroleum Storage Tanks | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 2431 | 1984 | Standard Cup Method | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-16(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173, Appendix H, 3 | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.249(d) | ASTM B 162 | 1993 | Standard Specification for Nickel Plate, Sheet, and Strip | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.323(b)(3) | CGA C-14 | 1979 | Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(4) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.3(c) G1 | NACE RP-0169 | 2002 | Control of External Corrosion on Underground or Submerged Metallic Piping Systems, paragraphs 6.2, 6.3, 10.1.1.3. | National Association of Corrosion Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1709 | 2001 | Standard Test Method for Impact Resistance of Plastic Film by the Free-Falling Dart Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 9809-2 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.55(d)(3) | CGA C-3 | 1994 | Standard for Welding on Thin-Walled Steel Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(a) Table IB (33) | USGS I-3447-85 | 1985 | Magnesium, by Flame Atomic Absorption | U.S. Geological Survey | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.220-7 | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H50155 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(m)(2) | ISO 11114-2 | 2000 | Transportable gas cylinders-- Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.358-5(c) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.200-13(a) | AAR Publication | 2000 | Specification for Tank Cars, Appendix E | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.128(c)(3) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DLAR 8220.1 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.302(b)(3) | ISO 11621 | 1997 | Gas cylinders--Procedures for change of gas service | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-2(a) | ASTM A 1008/A 1008M | 2003 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.3(e)(1) | CI A Kit | 2003 | Chlorine Institute Emergency Kit "A" for 100-lb. & 150-lb. Chlorine Cylinders (with the exception of repair method using Device 8 for side leaks) | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9978 | 1992 | Sealed Radioactive Sources--Leakage Test Methods | International Organization for Standardization / International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(d)(2) | ASTM B 117 | 1964 | Standard Method of Salt Spray (Fog) Testing | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.911(l) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASME B31.4 | 1998 | Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.307(a)(4)(iv) | ASHRAE 15 | 1994 | Safety Code for Mechanical Refrigeration | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 2919 | 1980 | Sealed Radioactive Sources--Classification | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-4(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.417(a)(3)(i) | USEC-651 | 1999 | Good Handling Practices for Uranium Hexafluoride, Revision 8 | United States Enrichment Corporation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.46(b)(4) Table 1, Note 2 | ASTM B 221 | 1976 | Aluminum Alloy Extruded Bars, Rods, Shapes, and Tubes | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-15 | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.927(b) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.3(b) | ASTM A 53 | 2004 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.923(b)(1) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.137(c)(2) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1835 | 1997 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102(c)(3) B13c | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9809-3 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.274(a)(3) "Fine grain steel" | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.8 | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.264(b)(1) | NFPA 30 | 2003 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.307(e) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H51970 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11117 | 1998 | Gas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests | International Organization for Standardization |