This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | ANSI/NFPA 72B | 2014 | Auxiliary Signaling Systems | National Fire Protection Association | |
Interior Department | 43 CFR 11.44(c) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 49 CFR 178.46(b)(4) Table 1, Note 1 | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Coast Guard | 21 CFR 178.3870(f)(6)(iv) | FDA Publication | 1989 | Determination of Phenolic Modification of Rosin Derivatives | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 63.3941(b)(4) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(33) | API MPMS | 2005 | Chapter 10, Section 9 | American Petroleum Institute | |
Coast Guard | 46 CFR 130.240(a) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 Ft) in Length | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b) | Drawing No. TE-2208-001 | 1987 | Neck mounting adaptor | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(a)(5)(i) | SAE J-168 | 1970 | Protective Enclosures--Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.2.1 | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Food and Drug Administration | 21 CFR 184.1461(b) | Food Chemicals Codex | 1981 | Manganese Sulfate | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1278(b) | Food Chemicals Codex | 1981 | Diacetyl | National Academy Press | |
Federal Highway Administration | 23 CFR 650.313(d) | AASHTO Publication | 2008 | The Manual for Bridge Evaluation | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (112) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(d)(3) | EPA Method 415.3 | 2005 | Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water, Revision 1.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(93) | ASTM E 711 | 2004 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA-600-R-94-173 | 1994 | Technical Notes on Drinking Water Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Coal | ASTM D 388 | 1995 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1571(a)(6)(ii)(B) | ASTM D6348-03 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Food and Drug Administration | 21 CFR 180.22(b) | FDA Publication | 1989 | Measurement of [beta]-(2-Hydroxyethylmercapto) Propionitrile in Heptane Food-Stimulating Solvent | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 59.01-2(b)(4) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.053-1(a)(1) | MIL-L-17653A | 1983 | Life Preserver, Vest, Work-Type, Unicellular Plastic | U.S. Department of Defense | |
Rural Utilities Service | 7 CFR 1755.890, Appendix A (III)(5)(c) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1631.61(a) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Coast Guard | 46 CFR 182.470(c) | ABYC H-32 | 1987 | Ventilation of Boats Using Diesel Fuel | American Boat and Yacht Council | |
Rural Utilities Service | 7 CFR 1728.202(d)(2) | AWPA A2 | 2008 | Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 63.1208(b)(5)(ii)(B) | ASTM D 6735 | 2001 | Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(4) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84 | American Society of Mechanical Engineers | |
Federal Energy Regulatory Commission | 18 CFR 284.12(a)(1)(i) | NAESB Publication | 2006 | Additional Standards (General Standards and Creditworthiness Standards) and Additional Standards (Gas/Electric Operational Communications) | North American Energy Standards Board | |
Coast Guard | 46 CFR 193.30-1 | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(134) | ASTM D 3286 | 1996 | Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(3) | ASME B&PV Code | 1998 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(34) | ANSI C33.2 | 1956 | Safety Standard for Transformer-Type Arc Welding Machines | American National Standards Institute | |
Energy Department | 10 CFR 430.3(g)(1) | AHAM DW-1 | 1992 | Household Electric Dishwashers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 160.176-1(c)(2) | IMO SOLAS | 1983 | 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xxxviii) | ASTM D 3454 | 1991 | Standard Test Method for Radium-226 in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, B | ISO 9408:1999(E) | 1999 | Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium by Determination of Oxygen Demand in a Closed Respirometer. Second Edition | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 572.146(g) | Drawing No. SA-572-S20 | 1994 | Lumbar spine force/moment transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Disulfoton) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart M | HIHWMP | 2014 | Sate of Hawaii Hazardous Waste Management Program (Reserved) | State of Hawaii | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 2006 | Chapter 3, Section 2 | American Petroleum Institute | |
Coast Guard | 36 CFR 1238.14(c) | ISO 18901 | 2002 | Imaging Materials--Processed Silver-gelatin Type Black-and-White Films--Specifications for Stability | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 173.357(a)(2) | FDA Publication | 1989 | Methodology for Molecular Weight Determination of Polyethylenimine | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(B)(4) | CGA C-6 | 2014 | Standard for Visual Inspection of Compressed Gas Cylinders | Compressed Gas Association | |
Engineers Corps | 33 CFR 222.3(d)(2) | ANSI C2 | 2012 | National Electrical Safety Code | American National Standards Institute | |
Coast Guard | 33 CFR 183.5(b) | SAE J-1527 | 1985 | Marine Fuel Hoses | Society of Automotive Engineers | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (27) | EPA Method 130.1 | 1971 | Hardness - Colorimetric, Automated EDTA | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 58.50-10 Table 58.50-10(a) | ASTM B 127 | 1998 | Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip | ASTM International |