This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Aviation Administration | 14 CFR 135.168(F)(1)(i) | TSO-C126 | 1992 | 406 MHz Emergency Locator Transmitter (ELT) | U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(2)(v) | NFPA 54 | 1969 | Standard for the Installation of Gas Appliances and Gas Piping | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (28) | ASTM D 1293A | 1999 | Standard Test Methods for pH of Water, Precise Laboratory Measurement | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.76(a) | Drawing No. SA 106C 042 | 1997 | Arm Assembly, Left, Revision A | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1755.870(a)(7) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(d)(18) | ASME B16.25 | 2003 | Buttwelding Ends | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(c) | ASTM D 2013/D 2013M | 2009 | Standard Practice for Preparing Coal Samples for Analysis | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(i)(5) | ASTM C 595 | 2008 | Blended Hydraulic Cements | ASTM International | |
Coast Guard | 46 CFR 160.005-4(d) | Drawing No. 160.005-1 (Sheet 4) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 111.12-1(a) | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429e | 1969 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Coast Guard | 46 CFR 147.45(f)(6) | UL 1314 | 1984 | Standard for Special-Purpose Containers | Underwriters Laboratories, Inc. | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(6)(i) | ASTM D 2794 | 1992 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 385.415(b)(1) | CVSA Publication | 2013 | North American Standard Out-of-Service Criteria and Level VI Inspection Procedures and Out-of-Service Criteria for Commercial Highway Vehicles Transporting Transuranics and Highway Route Controlled Quantities of Radioactive Materials | Commercial Vehicle Safety Alliance | |
Food and Drug Administration | 21 CFR 173.165(b)(2) | FDA Publication | 1970 | Yeasts—A Toxonomic Study by Jacomina Lodder | Food and Drug Administration, U.S. Department of Health and Human Services | |
Food and Drug Administration | 21 CFR 184.1733(b) | Food Chemicals Codex | 1981 | Sodium Benzoate | National Academy Press | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(6)(v) | IEC 61508-5 Corr.1 | 1999 | Corrigendum 1 Part 5: Examples of methods for determination of safety integrity levels | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (15) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table Note 2 | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98, Subpart I, Appendix A | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 173.315 Table Note 15 | ASTM D 1838 | 1964 | Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | ASTM International | |
Coast Guard | 46 CFR 129.410(d) | UL 1572 | 1995 | High Intensity Discharge Lighting Fixtures | Underwriters Laboratories, Inc. | |
Housing and Urban Development Department | 24 CFR 200.945(a)(2) | AATCC 165 | 1986 | Colorfastness to Crocking: AATCC Crock Meter Method 1986 HUD/HC | American Association of Textile Chemists and Colorists | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (10) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 20 | OIA Method OIA-1677 DW | 2004 | Available Cyanide by Flow Injection, Ligand Exchange, and Amperometry, EPA-821-R-04-001 | OI Analytical | |
Environmental Protection Agency | 40 CFR 63.11646(a)(1)(vi) | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Food and Drug Administration | 21 CFR 177.1570(b)(1)(iii) | ASTM D 1505 | 1979 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ISO 1496 | 1978 | General Cargo Containers | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 60.2145(s)(1)(ii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 164.018-11(d)(2) | FedSpec CCC-C-443E | 1974 | Cloth, Duck, Cotton (Single and Plied Filling Yarns, Flat) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 164.015-1(a)(1) | MIL-F-859E | 1965 | Fuel Oil, Boiler | U.S. Department of Defense | |
Energy Department | 10 CFR 434.701.1 RS-4 | ASHRAE Handbook | 1993 | Fundamentals (RS-4) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 175.10(a)(18)(vi) | IEC/PAS 62282-6-1 | 2006 | Fuel Cell Technologies--Part 6-1: Micro Fuel Cell Power Systems--Safety | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 55.14(d)(3)(i) | 40 CFR part 52, subpart C | 2006 | State of California Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 682 | 1993 | Wrought Carbon Steel Sleeve-Type Pipe Couplings | ASTM International | |
Rural Utilities Service | 7 CFR 1755.506(dd) | 7 CFR 1755.505 | 2012 | Buried services | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 40 CFR 60.251(a) Anthracite | ASTM D 388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(194) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Mine Safety and Health Administration | 30 CFR 75.818(b)(1) | ASTM F 496 | 1997 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves | ASTM International | |
Coast Guard | 46 CFR 164.120-5(d)(1) | ISO 62:2008(E) | 2008 | Plastics—Determination of water absorption, Third Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (24A) | OIA Method OIA-1677-09 | 2010 | Available Cyanide by Flow Injection, Ligand Exchange, and Amperometry | OI Analytical | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) | E-Colite ® Test | 1997 | Presence/Absence for Coliforms and E. Coli in Water | Charm Sciences, Inc. | |
Environmental Protection Agency | 40 CFR 799.5087(h)(1)(ix) | ASTM E 1720 | 2001 | Standard Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO2 Production Test | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.120(a)(1)(vi) | Drawing No. 127-5000-1 | 2009 | Drawings and Specifications for the Hybrid III 6-year-old Dummy, Arm Assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 160.077-19(a)(5) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.174(b)(1) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Trifluralin) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 268.7(c)(2) | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 49.162(d)(3)(i)(A)(3) | ASTM D6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International |