This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (46) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-I D | 2000 | Radioactive Iodine-Distillation Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 1266 | 1998 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6)(i) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2 | ASTM D 2369 | 1993 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(20) | EPA Method 1613 | 1990 | Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | AI MSI-1 | 1981 | Thickness Design--Asphalt Pavement for Highways and Streets | Asphalt Institute | |
Housing and Urban Development Department | 24 CFR 3280.508(e) | ASHRAE Handbook | 1997 | Fundamentals | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Energy Department | 10 CFR 430.3(e)(3) | ASHRAE 37 | 2005 | Methods of Testing for Rating Unitary Air-Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-39A | 1971 | Runway and Taxiway Retroreflective Markers | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 39.1005(b)(1) | ANSI B16.5 | 1981 | Steel Pipe Flanges and Flanged Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (25) | Waters Method D6508, Revision 2 | 2000 | Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | Waters Corp. | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F C | 1992 | Fluoride by Ion-Selective Electrode Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(30) | ASTM D 4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.225 S6.2.1.1 | SAE J-826 | 1992 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(k)(8)(iii)(A) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 29 CFR 1926.6(dd)(14) | SAE J-396 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 147, Subpart BB, Appendix A(a)(1) | MTUIC regulations | 1995 | Montana Code annotated, 1995, Title 2, Chapter 15 | State of Montana | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(vi) | IEC 61094-3 | 1995 | Measurement Microphones--Part 3: Primary Method for Free-Field Calibration of Laboratory Standard Microphones by the Reciprocity Technique, edition 1.0 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.135-15(e)(1)(iii) | ISO 1172:1996(E) | 1996 | Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 1043.20 Annex VI | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(M) | EPA Method 630.1 | 1993 | Dithiocarbamate Pesticides by GC/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | USGS I-3136-85 | 1989 | Cadmium, by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 86.1(g)(9) | SAE J-1939-11 | 1999 | Physical Layer—250K bits/s, Shielded Twisted Pair | Society of Automotive Engineers | |
Coast Guard | 40 CFR 60.18(f)(3) | ASTM D 1946 | 1990 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. S, 2a | ASME A112.18.1M | 1996 | Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 147.2100(b)(1) | SDUIC regulations | 2014 | South Dakota Codified Laws, Chapter 45-9 (sections not cited above) (1983); 1-26 (1981) | State of South Dakota | |
Environmental Protection Agency | 40 CFR 63.457(b)(5)(i) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 57.3203(a)(1) | ASTM F 432 | 1995 | Standard Specification for Roof and Rock Bolts and Accessories | ASTM International | |
Coast Guard | 46 CFR 181.425(b) | NFPA 17 | 1985 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(d)(4) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Coast Guard | 33 CFR 142.42(b) | ANSI A10.14 | 1975 | Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1) | SAE J-397a | 1973 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 435.15 Note 6 | EPA Method 1647 | 2015 | Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995 | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(5) | Drawing No. SA-SID-M060 | 1994 | Title not specified | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE (2) | ASTM D 1943 | 1996 | Standard Test Method for Alpha Particle Radioactivity of Water | ASTM International | |
Coast Guard | 46 CFR 111.105-7(b) | IEC 60079-2 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 2: Pressurized Enclosures “p”, Fourth Edition | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 192.227(a) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108, 7.1.3 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1571(a)(6)(ii)(B) | ASTM D6348-03 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (1)(a)(ii)(1) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.304(f) | ANSI O1.1 | 1961 | Safety Code for Woodworking Machinery | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | UL 1102 | 1992 | Non integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(82) | API MPMS | 2005 | Chapter 5—Metering, Section 8—Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology; First Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (82) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Total Chlorine) | APHA Method 4500-Cl I | 2014 | Chlorine, Iodometric Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(19) | EMSL-LV0539-17 | 1979 | Radiochemical Analytical Procedures for Analysis of Environmental Samples | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (28) | EPA Method 150.2 | 1982 | ph - Electrometric, continuous monitor | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.800(b)(2) | Food Chemicals Codex | 1981 | Method III of the Fluoride Limit Test | National Academy Press |