This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.900(k)(5) | IME Publication 20 | 1971 | Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps | Institute of Makers of Explosives | |
Research and Special Programs Administration | 49 CFR 171.12(a) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-S-230C | 1970 | Sealing Compound, Elastomeric Type, Single-Component (for Caulking, Sealing and Glazing in Buildings and Other Structures) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 86.157-98(f)(3) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Federal Communications Commission | 47 CFR 15.38(b)(6) | ANSI C63.4 | 2003 | Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.703(g)(6)(ii) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(b)(40) | EPA-821-B-98-016 | 1998 | Analytical Methods for the Determination of Pollutants in Pharmaceutical Manufacturing Industry Wastewaters, EPA Method 1667 | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-17A | 1971 | Standby Power for Non-FAA Airport Lighting System | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | EPA Method 200.8 | 1995 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 143.405(a)(10) | UL 1123 | 1987 | Marine Buoyant Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.335(b)(4) | EPA Method 7E | 2014 | Determination of Nitrogen Oxides Emissions From Stationary Sources (Instrumental Analyzer Procedure) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.3 | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Coast Guard | 46 CFR 160.151-21(m) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 177.410(b)(5) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (37) | USGS I-4471-97 | 1997 | Metals by Inductively Coupled Plasma | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(b)(20)(iv) | IDEXX Test Methods | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435 Appendix 5, Subpart A | EPA Method 1655 | 2015 | Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Recommended Service Procedure, Section 1 | SAE J-1990 | 1990 | Extraction and Recycle Equipment for Mobile Automotive Air-Conditioning Systems | Society of Automotive Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. N, 7.1 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-5(c)(1) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.186(a) | Drawing No. 175-5000 | 2009 | Abdominal Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 147.550(a)(4) | GAUIC regulations | 1988 | Georgia Administrative Procedure Act, O.C.G.A. §§ 50-13-1 through 50-13-22 (Reprinted from the O.C.G.A. and 1988 Cumm. Supp.) | State of Georgia | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 1, (1)(b) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 80.2(z)(1), Aromatic content | ASTM D 1319 | 2013 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.75(a) | Drawing No. SA 106C 050 | 1997 | Lumbar Spine Assembly, Revision A | Reprographic Technologies | |
Coast Guard | 46 CFR 116.300(b)(1)(i) | ABS Publication | 1975 | Rules for Building and Classing Aluminum Vessels | American Bureau of Shipping | |
Mine Safety and Health Administration | 30 CFR 77.403-1(e)(1) | CA State Regulations | 2013 | CAAC Title 8, Article 7, Section 5243, Logging and Sawmill Safety Orders, Tractor Yarding | State of California, Administrative Code | |
Coast Guard | 46 CFR 147.45(f)(4) | UL 1185 | 1984 | Standard for Portable Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 381 | 2001 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission Systems | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | USGS I-3062-85 | 1989 | Arsenic by Gaseous Hydride Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 98.7(e)(34) | ASTM D 6883 | 2004 | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (62) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 173.315(k) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 16 CFR 1630.61(a) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
National Highway Traffic Safety Administration | 49 CFR 571.226 S7.1.1 | NHTSA Parts List | 2010 | Ejection Mitigation Headform Drawing Package | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 10 CFR 430 Subpart B, App. A1, 2.2 | AHAM HRF-1 | 1979 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 111.105-7 | IEC 60079 | 2012 | Electrical Apparatus for Explosive Gas Atmospheres Series | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.33(b) | Drawing No. 78051-98 | 1987 | Title not specified | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (70) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (total chromium) | ASTM D 5673 | 2010 | Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.485a(g)(5) | ASTM D 2504 | 1993 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I) | APHA Standard Methods | 1995 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Food and Drug Administration | 21 CFR 172.869(b)(9) | Food Chemicals Codex | 1997 | Sucrose Fatty Acid Esters | National Academy Press | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(5) | ASME B30.14, Section 14-1.7.2 | 2004 | Side Boom Tractors, General Requirements—Exhaust Gases | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (18) Nitrate | ASTM D 3867B | 1990 | Standard Test Methods for Nitrite-Nitrate in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(f)(6) | ASME MFC-7M | 2006 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 178.3870(f)(4) | ASTM D 88 | 1981 | Standard Test Method for Saybolt Viscosity | ASTM International | |
Coast Guard | 46 CFR 164.015-1(a)(2) | FedSpec C-C-91D | 1983 | Candle, Illuminating | Federal Specifications Standards and Test Methods | |
Consumer Product Safety Commission | 16 CFR 1630.4(b)(1)(ii) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists |