This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort ascending |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(59) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(34) | API MPMS | 1997 | Chapter 11.1, Volume 1, Table 5A, Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 ° | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(49) | API MPMS | 1992 | Chapter 14—Natural Gas Fluids Measurement, Section 3—Concentric Square-Edged Orifice Meters; Part 3—Natural Gas Applications | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.856(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.132(b)(1) | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Environmental Protection Agency | 88 FR 44468 | 40 CFR 80 | API MPMS 14.3.4–2019 | 2019 | Renewable Fuel Standard (RFS) Program: Standards for 2023-2025 and Other Changes | American Petroleum Institute |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | API RP 505 | 2018 | Update to Electrical Engineering Regulations | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.114(a) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 61.241 Maximum true vapor pressure (1) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.803(b)(9)(v) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(69) | API Spec. 2C | 2004 | Specifications for Offshore Cranes | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(19) | API MPMS | 2005 | Chapter 5, Section 4 | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.264(e)(2) | API 2000 | 1998 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(2) | API 570 | 2016 | Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(66) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(7) | API RP 2A-WSD | 2000 | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 83 FR 49259 | 30 CFR 250.872 (a) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Research and Special Programs Administration | 49 CFR 195.264(e)(1) | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(83) | API MPMS | 2004 | Chapter 11—Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils; incorporating Addendum 1, September 2007 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.125(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Environmental Protection Agency | 88 FR 44468 | 40 CFR 1090 | API MPMS 14.3.2–2016 | 2016 | Renewable Fuel Standard (RFS) Program: Standards for 2023-2025 and Other Changes | American Petroleum Institute |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | API RP 14F | 2008 | Update to Electrical Engineering Regulations | American Petroleum Institute |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | API RP 14F | 2018 | Update to Electrical Engineering Regulations | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(B)(1) | API 620 | 1966 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(iv) | API MPMS | 2013 | Chapter 11, Section 1 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1628(b)(3) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.8(a)(3) | API RP 80 | 2000 | Guidelines for the Definition of Onshore Gas Gathering Lines | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(43) | API MPMS | 2006 | Chapter 14, Section 6 | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.432(c) | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(18) | API MPMS | 2007 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(82) | ANSI/API Spec. 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iv)(B)(1) | API 620 | 1966 | Recommended Rules for the Design and Construction of Large, Welded, Low-Pressure Storage Tanks, Third Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.618(a) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21983 | 30 CFR 250.739 (a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | API MPMS | 2005 | Chapter 22, Section 2 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(l)(4) | API MPMS | 2007 | Chapter 11, Section 1 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1629(b)(4)(v) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b)(2) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 14FZ | 2013 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(34) | API MPMS | 2007 | Chapter 10—Sediment and Water, Section 1—Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method | American Petroleum Institute |
Coast Guard | 33 CFR 164.74(a)(3)(ii) | API 9A | 1984 | Specification for Wire Rope, Section 3, Properties and Tests for Wire and Wire Rope | American Petroleum Institute | |
Research and Special Programs Administration | 30 CFR 250.198(h)(72) | ANSI/API Spec. 6D | 2009 | Specification for Pipeline Valves, Twenty-third Edition, Errata 1, June 2008; Errata 2, November 2008; Errata 3, February 2009; Addendum 1, October 2009; Contains API Monogram Annex as Part of U.S. National Adoption | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.3(c) B3 | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(3) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API Bulletin 2509 B | 1987 | Shop Testing of Automatic Liquid Level Gages | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.803(a) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.114(c) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(67) | API RP 2556 | 2003 | Recommended Practice for Correcting Gauge Tables for Incrustation | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(50) | API MPMS | 2009 | Chapter 14.5/GPA Standard 2172-09; Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.858(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |