This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 111.01-9(b) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 148.450(a) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 160.055-5(b)(1) | Drawing No. 160.055-1A, Sheet 2 | 2012 | Life Preservers, Unicellular Plastic Foam, Adult, Construction and Arrangement, Vinyl Dip Coated, Model 66, Child | U.S. Coast Guard | |
Coast Guard | 46 CFR 161.002-4(b)(1) | UL 521 | 1993 | Heat Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.60-11(c) | UL 44 | 1999 | Standard for Thermoset-Insulated Wire and Cable, Fifteenth Edition, Mar. 22, 1999 (Revisions through and including May 13, 2002) | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.60-6(a) | IEC 60332-3-22 | 2000 | Tests on Electric Cables Under Fire Conditions—Part 3-22: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables—Category A, First Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.077-19(c)(10) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 136.3(a) Table IB (24) | APHA Method 4500-CN G | 1998 | Cyanide Amenable to Chlorination after Distillation | American Public Health Association | |
Coast Guard | 46 CFR 111.60-1(a) | MIL-C-24643A | 1994 | Military Specification Cables and Cords, Electric, Low Smoke, for Shipboard Use, General Specification for (1996) Amendment 2 | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.133-5(b)(5) | ASTM A653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 160.055-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B85 | 1996 | Standard Specification for Aluminum-Alloy Die Castings | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(I) | EPA-600-R-95-131 | 1995 | Methods for the Determination of Organic Compounds in Drinking Water-Supplement III | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 131.875(e) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 40 CFR 60, Appendix B, PS-1, 8.1(1) | ASTM D6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Coast Guard | 46 CFR 160.135-7(b)(7)(ii)(A) | ASTM B209 | 2007 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Coast Guard | 46 CFR 160.048-3(d)(1) | FedSpec CCC-C-426D | 1995 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 8.110(b) | ABS Publication | 1998 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 46 CFR 56.01-2(d)(2) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.60-23(f) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 46 CFR 160.151-7(a) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 39.1005(g)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Coast Guard | 36 CFR 1237.3(d)(1) | NFPA 40 | 2007 | Standard for the Storage and Handling of Cellulose Nitrate Motion Picture Film | National Fire Protection Association | |
Coast Guard | 46 CFR 160.076-25(d) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.151-29 | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.171-17(h) | UL 1191 | 1977 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 63.05-1(b)(1) | ANSI/AGA Z21.22 | 1986 | Relief Valves and Automatic Shutoff Devices for Hot Water Supply Systems | American Gas Association | |
Coast Guard | 46 CFR 120.340(o) | NFPA 70 | 1987 | National Electrical Code (NEC) Section 310-15 | National Fire Protection Association | |
Coast Guard | 46 CFR 161.002-1(b) | Lloyd's Publication | 1990 | LR Type Approval System: Test Specification Number 1 | Lloyd's Register of Shipping | |
Coast Guard | 46 CFR 160.156-7(b)(8)(ii)(B) | SAE J-1527 | 1993 | Marine Fuel Hoses | Society of Automotive Engineers | |
Coast Guard | 46 CFR 162.161-7(b)(4) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A333/A 333M | 1994 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service | ASTM International | |
Coast Guard | 40 CFR 60.593a(b)(2) | ASTM E169 | 1993 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(3)(ii) | ISO 1183-1:2004(E) | 2004 | Plastics—Methods for determining the density of non-cellular plastics—Part 1: Immersion method, liquid pyknometer method and titration method, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 175.600(b) Table | UL 174 | 1994 | Household Electric Storage Tank Heaters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 162.050-15(f)(1) | ASTM D2777 | 1998 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D-19 on Water | ASTM International | |
Coast Guard | 46 CFR 172.020(b)(2) | IMO Publication No. 240-E | 1994 | International Code for the Safe Carriage of Grain in Bulk | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B16 | 1992 | Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines | ASTM International | |
Coast Guard | 46 CFR 30.10-27 Table 30.10-27 | ASTM D56 | 2013 | Standard Test Method for Flash Point by Tag Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 54.01-35 Note | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.5 | 2003 | Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard 2003 DHS/USCG | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 197.340(f)(1) | FedSpec BB-O-925a | 1961 | Oxygen, Technical, Gas and Liquid | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 136.3(a) Table IB (32) | ASTM D3559D | 2008 | Standard Test Methods for Lead in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F1007 | 1996 | Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application | ASTM International | |
Coast Guard | 46 CFR 182.470(c) | ABYC H-32 | 1987 | Ventilation of Boats Using Diesel Fuel | American Boat and Yacht Council | |
Coast Guard | 46 CFR 57.03-1(a)(2) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F1172 | 1993 | Fuel Oil Meters of the Volumetric Positive Displacement Type | ASTM International | |
Coast Guard | 33 CFR 164.72(a)(1)(iv)(B) | RTCM Paper 191-93/SC112-X | 1993 | Recommended Standards for Marine Radar Equipment Installed on Ships of 300 Tons Gross Tonnage and Upwards | Radio Technical Commission for Maritime Services | |
Coast Guard | 46 CFR 39.1005(d)(1) | ASTM F1122 | 1992 | Steel Pipe Flanges and Pipe Fittings | ASTM International |