This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 21 CFR 165.110(b)(4)(iii)(I)(5)(iv) | APHA Method 4500-Cl G | 2012 | Residual Chlorine by Spectrophotometric, DPD | American Public Health Association | |
Coast Guard | 46 CFR 160.156-11(c)(2)(ii) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 52.05-20 | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.01-2(e)(5) | ASTM A 126 | 1995 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | ASTM International | |
Coast Guard | 46 CFR 56.01-2(k)(14) | MSS SP-73 | 1996 | Brazing Joints for Copper and Copper Pressure Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 160.049-1(a)(4) | MIL-C-43006 | 1989 | Cloth, Laminated, Vinyl-Nylon, High Strength | U.S. Department of Defense | |
Coast Guard | 46 CFR 162.028-3(c)(6) | Federal Standard 151 | 1967 | Metals, Test Methods, Method 811 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 35.01-3(b) | ASTM Adjunct F1626 | 1996 | Symbols Used in Accordance with Regulation II-2/20 of the 1974 SOLAS Convention as amended PCN: 12-616260-01 | ASTM International | |
Coast Guard | 46 CFR 160.076-31(c)(4) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 164.023-7(b)(2) | Federal Standard 191A | 1978 | Method 5804, Weathering Resistance of Cloth; Accelerated Weathering Method | Federal Highway Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.01-2(e)(72) | ASTM F 1020 | 2011 | Standard Specification for Line-Blind Valves for Marine Applications | ASTM International | |
Coast Guard | 33 CFR 164.46(a)(3)(iii), Note to 164.46(a) | IEC 61993-2 | 2001 | Maritime Navigation and Radiocommunication Equipment and Systems, Automatic Identification Systems (AIS) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2) | ASTM D 570 | 2005 | Standard Test Method for Water Absorption of Plastics | ASTM International | |
Coast Guard | 21 CFR 150.110(d)(5) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 164.015-1(a)(4) | ASTM D 4986 | 1998 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials | ASTM International | |
Coast Guard | 33 CFR 126.15(a)(1) | NFPA 307 | 1995 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
Coast Guard | 46 CFR 175.800(b) | COMDTINST M16714.3 (Series) | 2013 | Equipment Lists, Items Approved, Certificated or Accepted under Marine Inspection and Navigation Laws | U.S. Coast Guard | |
Coast Guard | 46 CFR 56.15-1(c)(2)(i) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 39.1005(d)(2) | ASTM F 1271 | 1989 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protection Applications | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (9) | USGS I-3720-85 | 1985 | Silver chelation/extraction by Flame Atomic Absorption | U.S. Geological Survey | |
Coast Guard | 46 CFR 52.01-120(a)(6) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B18.2.1 | 1996 | Square and Hex Bolts and Screws (Inch Series) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 315 | 1993 | Seamless Copper Alloy Pipe Tube | ASTM International | |
Coast Guard | 46 CFR 164.018-11(d)(2) | FedSpec CCC-C-426D | 1970 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Coast Guard | 6 CFR 27.203(b)(1)(v) | NFPA 704 | 2007 | Standard System for the Identification of the Hazards of Materials for Emergency Response | National Fire Protection Association | |
Coast Guard | 21 CFR 177.1345(b)(2) | ASTM D 1525 | 1987 | Standard Test Method for Vicat Softening Temperature of Plastics | ASTM International | |
Coast Guard | 46 CFR 63.25-9(f) | IMO Resolution MEPC.76(40) | 1997 | Standard Specification for Shipboard Incinerators | International Maritime Organization | |
Coast Guard | 46 CFR 160.174-17(g) | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Coast Guard | 46 CFR 164.023-3(b)(4) | FedSpec V-T-285E | 1986 | Thread, Polyester | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D 129 | 1978 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Coast Guard | 46 CFR 199.178(a) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(6) | ASTM A 134 | 2012 | Standard Specification for Pipe, Steel, Electric Fusion (Arc)-Welded (Sizes NPS 16 and Over) | ASTM International | |
Coast Guard | 46 CFR 54.25-1 | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(14) | IEC 79-18 | 1992 | Electrical Apparatus for Explosive Gas Atmospheres | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.026-1(a)(1) | MIL-W-15117 | 1998 | Water, drinking, canned, emergency | U.S. Department of Defense | |
Coast Guard | 46 CFR 110.10-1(g)(25) | IEC 92-401 | 1980 | Electrical Installations in Ships, Part 401: Installation and Test of completed Installation with amendment 1 (1987) and amendment 2 (1997), Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 122.604(i) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 76.25-1 | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 40 CFR 60.335(a)(4) | EPA Method 1 | 2014 | Sample and Velocity Traverses for Stationary Sources | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-0 | 2000 | Electrical apparatus for Explosive Gas Atmospheres—Part 0: General Requirements (Edition 3.1) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 114.600(b) | UL 1056 | 1989 | Fire Test of Upholstered Furniture | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 147.45(f)(4) | ABYC H-25 | 1981 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Coast Guard | 46 CFR 56.01-2(b)(4) | ANSI/ASME B16.15 | 1994 | Cast Bronze Threaded Fittings, Classes 125 and 250 | American National Standards Institute | |
Coast Guard | 46 CFR 111.105-1 | IEC 79-18 | 1992 | Electrical Apparatus for Explosive Gas Atmospheres—Part 18: Encapsulation “m”, First Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 114.600(b) | UL 1058 | 1994 | Halogenated Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 147.45(f)(5) | UL 30 | 1987 | Standard for Metal Safety Cans | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B 16 | 1992 | Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines | ASTM International | |
Coast Guard | 46 CFR 160.047-3(f) | MIL-T-43566 | 1991 | Military Webbing | U.S. Department of Defense | |
Coast Guard | 46 CFR 161.002-4(b)(3) | Lloyd's Publication | 1998 | LR Type Approval System: Test Specification Number 1 | Lloyd's Register of Shipping | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense |