This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.023-1(a)(1) | MIL-S-18655C | 1971 | Signal, Smoke and Illumination, Marine, Mark 13, Mod 0. | U.S. Department of Defense | |
Coast Guard | 46 CFR 113.25-11(a) | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Coast Guard | 40 CFR 444.12(b)(1) Table (1) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 46 CFR 160.077-27(e)(1) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 12.02-7(f) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 40 CFR 444.12(b)(1) Table (4) | ASTM D1688A | 1990 | Standard Test Methods for Copper in Water, Atomic Absorption, Direct | ASTM International | |
Coast Guard | 46 CFR 160.133-19(a) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 58.50-5 Table 58.50-5(a) | ASTM B152 | 1997 | Standard Specification for Copper, Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Coast Guard | 46 CFR 12.02-7(d) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 40 CFR 444.12(b)(1) Table Note (4) | EPA-600-4-79-020 | 1979 | Methods for Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.133-21(a)(1) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
Coast Guard | 46 CFR 119.440 Table 119.440(a)(1) | ASTM B122/B 122M | 1995 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar | ASTM International | |
Coast Guard | 46 CFR 153.4(b) | ASTM F1122 | 1992 | Standard Specification for Quick Disconnect Couplings | ASTM International | |
Coast Guard | 46 CFR 160.135-15(e)(1)(vi) | ASTM A653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 160.151-21(l) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.036-1(a)(1) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 54.25-10(c) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.151-21(a) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-13(d)(4)(vii) | ASTM F1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
Coast Guard | 36 CFR 1237.3(f)(2) | NAPM IT9.11 | 1993 | Imaging materials--Processed Safety Photographic Films--Storage Practices | Association for Information and Image Management | |
Coast Guard | 46 CFR 125.180(b) | IEEE 45 | 1977 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 15.1105(c)(1) | STCW Code | 1978 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(b)(7) | ASTM D638 | 2008 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Coast Guard | 46 CFR 162.050-4(c)(2) | ISO 9377-2 | 2000 | Water Quality—Determination of hydrocarbon oil index—Part 2: Method using solvent extraction and gas chromatography | International Organization for Standardization | |
Coast Guard | 46 CFR 160.016-5(b) | MIL-L-1204 | 1983 | Lamp, Safety, Flame | U.S. Department of Defense | |
Coast Guard | 34 CFR 75.616(c) | ASHRAE 90C | 1977 | Energy Conservation in New Building Design | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 164.120-5(b)(4) | ASTM D695 | 2008 | Standard Test Method for Compressive Properties of Rigid Plastics | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(ii) | ASTM D790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Coast Guard | 46 CFR 179.15(b)(1) | IMO Resolution MSC.216(82) | 2006 | Adoption of Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended | International Maritime Organization | |
Coast Guard | 46 CFR 52.01-120(d)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 53.01-10(a) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.20-1(d) | ASME B16.34 | 1996 | Valves--Flanged, Threaded, and Welding End | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 76.01-2(c)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 95.30-1 | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 15.103(g) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 2 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 199.280(e)(3) | IMO Resolution MSC.5(48) | 1993 | International Code for the Construction and Equipment of Ships carrying Liquefied Gases in Bulk, (IGC Code) | International Maritime Organization | |
Coast Guard | 33 CFR 154.808(b) | ANSI B16.24 | 1979 | Bronze Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American National Standards Institute | |
Coast Guard | 46 CFR 56.01-2(k)(2) | MSS SP-9 | 2001 | Spot Facing for Bronze, Iron and Steel Flanges | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 10.107(b) STCW | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IB (4) | APHA Method 4500-NH3 D | 1997 | Ammonia by Selective Ion Probe | American Public Health Association | |
Coast Guard | 33 CFR 183.540(b) | SAE J-1527 | 1985 | Marine Fuel Hoses | Society of Automotive Engineers | |
Coast Guard | 46 CFR 110.10-1(f)(6) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations On Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B68 | 1995 | Standard Specification for Seamless Copper Tube, Bright Annealed | ASTM International | |
Coast Guard | 33 CFR 127.201(c)(1) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 21 CFR 184.1115(b) | Food Chemicals Codex | 1981 | Agar-agar | National Academy Press | |
Coast Guard | 46 CFR 114.600(b) | NFPA 261 | 1994 | Test For Determining Resistance of Mock-up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes | National Fire Protection Association | |
Coast Guard | 33 CFR 155.230(b)(1)(i)(D) | ANSI A10.14 | 1991 | Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines | American National Standards Institute | |
Coast Guard | 46 CFR 56.01-2(d)(17) | ASME B16.24 | 2001 | Cast Copper Alloy Pipe Flanges and Flanged Fittings, Class 150, 300, 400, 600, 900, 1500, and 2500 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 12.15-7(c) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization |