This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.151-15 | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A350/A 350M | 1997 | Standard Specification for Forgings, Carbon and Low-Alloy Steel, Requiring Notch Toughness Testing for Piping Components | ASTM International | |
Coast Guard | 46 CFR 164.018-11(c)(2) | FedSpec L-S-300 | 1974 | Sheeting and Tape Reflective: Nonexposed Lens, Adhesive Backing | Federal Specifications Standards and Test Methods | |
Coast Guard | 24 CFR 3280.801(b) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 33 CFR 154.810(d)(5)(i) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Coast Guard | 46 CFR 111.25-5(a) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.151-29 | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 160.176-1(c)(2) | IMO SOLAS | 1983 | 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(3) | ASTM A53 | 1998 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Coast Guard | 7 CFR 1755.704(b)(1)(i) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 40 CFR 136.3(a) Table IF (Benzene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Coast Guard | 27 CFR 21.78(a)(2) | The United States Pharmacopoeia | 1980 | Formula No. 42 | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 111.75-20(a) | UL 1598A | 2000 | Standard for Supplemental Requirements for Luminaires for Installation on Marine Vessels, First Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.156-7(b)(23) | ASTM F1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
Coast Guard | 46 CFR 164.008-3(c)(4) | ASTM E119 | 1998 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B165 | 1993 | Standard Specification for Nickel-Copper Alloy Seamless Pipe and Tube | ASTM International | |
Coast Guard | 46 CFR 25.01-3(b) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 40 CFR 136.3(a) Table IG (Propachlor) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 113.30-25(j)(2) | IEC 60331-21 | 1999 | Tests for Electric Cables Under Fire Conditions—Circuit Integrity—Part 21: Procedures and Requirements—Cables of Rated Voltage up to and Including 0.6/1.0kV, First Edition | International Electrotechnical Commission | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | ASTM D4190 | 2008 | Metals by Direct Current Plasma | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(i) | ASTM D790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (1) | EPA Method 206.2 | 1995 | Arsenic by Graphite Furnace Atomic Absorption | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 183.410(d) | UL 595 | 1991 | Marine-Type Electric Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 175.600(b) Table | ISO 8849 | 1990 | Small Craft-Electrically Operated Bilge Pumps | International Organization for Standardization | |
Coast Guard | 40 CFR 444.12(b)(1) Table (5) | APHA Method 4500-H+B | 2005 | pH Value by Electrometric Method | American Public Health Association | |
Coast Guard | 46 CFR 35.01-3(b) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
Coast Guard | 46 CFR 161.006-1(a)(1) | NSSC 43B11 | 2012 | Bolts, nuts, studs, and tap-rivets | Navy Supply Systems Command | |
Coast Guard | 40 CFR 444.12(b)(1) Table Note (4) | EPA-600-4-79-020 | 1979 | Methods for Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Coast Guard | 27 CFR 21.70(a) | National Formulary | 1980 | Formula No. 39-A | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 54.10-5 Note | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 153.4(b) | ASTM F1122 | 1992 | Standard Specification for Quick Disconnect Couplings | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 199.05(b) | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 56.30-35(a) | ASTM F1476 | 1995 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications | ASTM International | |
Coast Guard | 33 CFR 96.130(b) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 33 CFR 183.540(a) | SAE J-1527 | 1985 | Marine Fuel Hoses | Society of Automotive Engineers | |
Coast Guard | 46 CFR 54.25-10(c) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 58.03-1(d)(3) | ANSI B93.5 | 1979 | Recommended practice for the use of Fire Resistant Fluids for Fluid Power Systems | American National Standards Institute | |
Coast Guard | 33 CFR 118.160(d)(2) | FHWA Publication | 1966 | Standard Alphabets for Highway Signs | Federal Highway Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 2.25-15(a)(3) | IMO Resolution A.739(18) | 1993 | Guidelines for the Authorization of Organizations Acting on Behalf of the Administration | International Maritime Organization | |
Coast Guard | 46 CFR 183.340(b)(4) | ABYC E-9 | 1990 | Direct Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 125.180(b) | IEEE 45 | 1977 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 15.1105(c)(1) | STCW Code | 1978 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 52.01-120(a)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 114.600(b) | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 54.01-1(d)(1) | CGA S-1.2.5.2 | 1979 | Flow Test of Safety Relief Valves | Compressed Gas Association | |
Coast Guard | 46 CFR 147.7(b)(1) | ABYC H-25 | 1981 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Coast Guard | 46 CFR 121.200 | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 58.25-60 | IMO Publication A.467(XII) | 1981 | Guidelines for Acceptance of Non-Duplicated Rudder Actuators for Tankers, Chemical Tankers and Gas Carriers of 10,000 Tons Gross Tonnage and Above But Less Than 100,000 Tonnes Deadweight | International Maritime Organization | |
Coast Guard | 46 CFR 175.600(b) Table | ANSI Z26.1 | 1977 | Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute |