| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
AISI S100–12 |
2012 |
Manufactured Home Construction and Safety Standards
|
American Iron and Steel Institute |
| Rural Utilities Service |
|
7 CFR 1728.97(b)(1) |
AITC 200 |
2004 |
Inspection Manual
Archived
|
American Institute of Timber Construction |
| Agriculture Department |
84 FR 28186 |
7 CFR 1728 |
AITC 200-2009 |
2009 |
Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers
|
American Institute of Timber Construction |
| Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
AITC All Standards |
2013 |
All specifications, standards and codes without specific reference
Archived
|
American Institute of Timber Construction |
| Environmental Protection Agency |
|
40 CFR 272, Subpart C |
AKHWMP |
2014 |
State of Alaska Hazardous Waste Management Program (Reserved)
|
State of Alaska |
| Environmental Protection Agency |
|
40 CFR 147.100(a)(3) |
AKUIC regulations |
1986 |
Alaska Administrative Code, Alaska Oil and Gas Conservation Commission, 20 AAC 25.005 through 20 AAC 25.570
|
State of Alaska |
| Environmental Protection Agency |
|
40 CFR 147.100(a)(2) |
AKUIC regulations |
1984 |
Alaska Statutes, Administrative Procedures Act, Title 44, §§ 44.62.010 through 44.62.650
|
State of Alaska |
| Environmental Protection Agency |
|
40 CFR 63.14(k)(12) |
Alaska Statute 42.45.045 |
2015 |
Renewable energy grant fund and recommendation program
|
State of Alaska |
| Environmental Protection Agency |
|
40 CFR 63.6675 Backup power for renewable |
Alaska Statute 42.45.045 |
2015 |
Renewable energy grant fund and recommendation program
|
State of Alaska |
| Environmental Protection Agency |
85 FR 41100 |
40 CFR 63 |
ALDT NESHAP |
2020 |
NESHAP: Surface Coating of Automobiles and Light-Duty Trucks; Miscellaneous Metal Parts and Products; Plastic Parts and Products; Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Metal Furniture Residual Risk and Techn...
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 272, Subpart B |
ALHWMP |
2014 |
State of Alabama Hazardous Waste Management Program (Reserved)
|
State of Alabama |
| Environmental Protection Agency |
|
40 CFR 52.02(d) |
ALSIP |
2003 |
State Implementation Plan with Regulatory and Nonregulatory Revisions
|
State of Alabama |
| Environmental Protection Agency |
|
40 CFR 147.52(a) |
ALUIC regulations |
2014 |
State Oil and Gas Board of Alabama Rule 400-4-1-.02, Definitions, and Rule 400-4-5-.04, Protection of Underground Sources of Drinking Water during the Hydraulic Fracturing of Coal Beds
|
State of Alabama |
| Environmental Protection Agency |
|
40 CFR 147.51(a)(2) |
ALUIC regulations |
1983 |
Regulations, Policies and Procedures of the Alabama Water Improvement Commission, Title I Rev. December 1980), as amended May 17, 1982, to add Chapter 9, (effective June 10, 1982), as amended April 6, 1983 (effective May 11, 1983)
|
State of Alabama |
| Environmental Protection Agency |
|
40 CFR 147.51(a)(1) |
ALUIC regulations |
1980 |
Alabama Water Pollution Control Act, Code of Alabama 1975, sections 22-22-1 through 22-22-14
|
State of Alabama |
| Environmental Protection Agency |
|
40 CFR 282.50(d)(1)(i)(B) |
ALUSTP |
1996 |
Alabama Regulatory Requirements Applicable to the Underground Storage Tank Program
|
State of Alabama |
| Environmental Protection Agency |
|
40 CFR 282.50(d)(1)(i)(A) |
ALUSTP |
1996 |
Alabama Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of Alabama |
| Coast Guard |
|
33 CFR 183.607(a)(1) |
AMCA 210 |
1974 |
Laboratory Methods of Testing Fans for Ratings
Archived
|
Air Movement and Control Association |
| Coast Guard |
|
33 CFR 183.5(b) |
AMCA 210 |
1974 |
Laboratory Methods of Testing Fans for Ratings
Archived
|
Air Movement and Control Association |
| Energy Department |
|
10 CFR 430.3(e)(8) |
AMCA 210 |
1999 |
Laboratory Methods of Testing Fans for Ratings
Archived
|
Air Movement and Control Association |
| Energy Department |
87 FR 50396 |
10 CFR 429 |
AMCA 230-15 Technical Errata 2021-05-05 |
2021 |
Energy Conservation Program: Test Procedure for Ceiling Fans
|
Air Movement and Control Association |
| Energy Department |
87 FR 50396 |
10 CFR 430 |
AMCA 230-15 Technical Errata 2021-05-05 |
2021 |
Energy Conservation Program: Test Procedure for Ceiling Fans
|
Air Movement and Control Association |
| Transportation Department |
89 FR 25434 |
49 CFR 175 |
Amendment 41–22 to the IMDG Code, 2022 |
2022 |
Hazardous Materials: Harmonization With International Standards
|
International Maritime Organization |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
Amendment 41–22 to the IMDG Code, 2022 |
2022 |
Hazardous Materials: Harmonization With International Standards
|
International Maritime Organization |
| Consumer Product Safety Commission |
88 FR 30226 |
16 CFR 1272 |
AMS STD-595A-17 |
2017 |
Marking of Toy, Look-Alike, and Imitation Firearms
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 94.5(b)(1) |
Annex VI of MARPOL 73/78 |
1997 |
Resolution 2—Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines
Archived
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 3 |
Annual Book of Standards |
2003 |
Annual Book of ASTM Standards, Vols. 11.01 and 11.02
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 3 |
Annual Book of Standards |
1996 |
Annual Book of ASTM Standards, Vols. 11.01 and 11.02
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 571.5(d)(1) |
Annual Book of Standards |
1985 |
Vol. 05.04, Test Methods for Rating Motor, Diesel, Aviation Fuels, A2. Reference Materials and Blending Accessories, A2.3.2, A2.3.3, and A2.7
Archived
|
ASTM International |
| Alcohol, Tobacco, Firearms, and Explosives Bureau |
|
27 CFR 21.6(b) |
Annual Book of Standards |
1980 |
Annual Book of ASTM Standards, Parts 23, 25, and 29
Archived
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S5.2 (14) |
Annual Book of Standards |
1985 |
Annual Book of ASTM Standards: Test Methods for Rating Motor, Diesel, Aviation Fuels, Section I, parts A2.3.2, A2.3.3, and A2.7 in Annex 2
|
ASTM International |
| Agriculture Department |
84 FR 28186 |
7 CFR 1728 |
ANSI 05.3-2015 |
2015 |
Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers
|
American National Standards Institute |
| Energy Department |
|
10 CFR 434.701.1 RS-13 |
ANSI 101/I.S. 2 |
1997 |
Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors (RS-13)
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926 Subpart M Appendix E (IV)(A)(6) |
ANSI A10.14 |
1991 |
Construction and Demolition Operations—Requirements for Safety Belts, Harnesses, Lanyards and Lifelines for Construction and Demolition Use
|
American National Standards Institute |
| Coast Guard |
|
33 CFR 155.140(b)(1) |
ANSI A10.14 |
1991 |
Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines
Archived
|
American National Standards Institute |
| Coast Guard |
|
33 CFR 140.7(b) |
ANSI A10.14 |
1975 |
Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(1) |
ANSI A10.3 |
1970 |
Safety Requirements for Explosive-Actuated Fastening Tools
Archived
|
American National Standards Institute |
| Coast Guard |
|
29 CFR 1926.6(h)(2) |
ANSI A10.4 |
1963 |
Safety Requirements for Workmen's Hoists
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(3) |
ANSI A10.5 |
1969 |
Safety Requirements for Material Hoists
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926 Subpart L Appendix A (1)(b)(i) |
ANSI A10.8 |
1988 |
Scaffolding-Safety Requirements
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI A108.1A |
1992 |
Specifications for Installation of Ceramic Tile in the Wet Set Method with Portland Cement Mortar
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(3) |
ANSI A11.1 |
1970 |
Practice for Industrial Lighting
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(4) |
ANSI A11.1 |
1970 |
Practice for Industrial Lighting
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(4) |
ANSI A11.1 |
1965 |
Practice for Industrial Lighting
Archived
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 100.201a(b)(4) |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 100.201 Accessible |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 100.201 Accessible route |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 100.201 Building entrance on an accessible route |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 100.205(e)(1) |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(14) |
ANSI A120.1 |
1970 |
Safety Code for Powered Platforms for Exterior Building Maintenance
Archived
|
American National Standards Institute |