This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 147.950(a)(4)(ii) | LAUIC regulations | 1978 | Supplement to Statewide Order No. 29-M (October 2, 1978) | State of Louisiana | |
Coast Guard | 46 CFR 160.050-3(b) | Federal Standard 191 | 1978 | Textile Test Method 5660 | Federal Specifications Standards and Test Methods | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.114(a) | ASTM D 86 | 1978 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Rural Utilities Service | 7 CFR 1755.97(b)(7) | RUS Bulletin 345-69, PE-29 | 1978 | Specification for Two-Wire Voice Frequency Repeater Equipment | Rural Utilities Service, U.S. Department of Agriculture | |
Occupational Safety and Health Administration | 29 CFR 1910.6(s)(1) | NIOSH Publication | 1978 | Registry of Toxic Effects of Chemical Substances | National Institute for Occupational Safety and Health | |
Labor Department | 41 CFR 50-204.65 | CGA C-6 | 1978 | Standard for Visual Inspection of Compressed Gas Cylinders | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 572.35(a) | Drawing No. 78051-124 | 1978 | Arm Assembly, Complete, Revision D | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (59) | EPA Method 267.2 | 1978 | Ruthenium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D 2986 | 1978 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(14) | ASTM D 756 | 1978 | Standard Practice for Determination of Weight and Shape Changes of Plastics under Accelerated Service Conditions | ASTM International | |
Food and Drug Administration | 21 CFR 178.3770(d)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1800(a)(1) | OHUIC regulations | 1978 | Ohio Revised Code Annotated, sections 1509.01 through 1509.22 (Page 1978 and Supp. 1982) | State of Ohio | |
Food and Drug Administration | 21 CFR 178.3770(a)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 78 | 1978 | Polyethylene (PE), Acrylonitrile Butadiene Styrene (ABS), Poly Vinyl Chloride (PVC) and Polybutylene (PB) Plastic Piping for Domestic Cold Water Service | U.S. Department of Housing and Urban Development | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1019 | 1978 | Performance Requirements for Wall Hydrants, Frost Proof Automatic Draining, Anti-Backflow Types | American Society of Sanitary Engineering | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (51) | EPA Method 255.2 | 1978 | Platinum (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(J) | EPA Method 255.2 | 1978 | Platinum (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.111(b) | ASTM D 396 | 1978 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 160.060-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
Food and Drug Administration | 21 CFR 178.3690(b)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.31(d) | Drawing No. 78051-338 | 1978 | Segment Weights, Interial Properties, Center of Gravity Locations--Hybrid III | Reprographic Technologies | |
Research and Special Programs Administration | 21 CFR 176.170(a)(5) | ASTM D 5 | 1978 | Standard Test Method for Penetration of Bituminous Materials | ASTM International | |
Coast Guard | 21 CFR 178.3770(b)(2) | ASTM D 1386 | 1978 | Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 129 | 1978 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.300-7(a) | ASTM A 285 | 1978 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | ASTM International | |
Food and Drug Administration | 21 CFR 177.1570(b)(1)(ii) | ASTM D 1601 | 1978 | Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | USGS I-4243-89 | 1978 | Cobalt by Graphite Furnace Atomic Absorption | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-61X | 1978 | Head Assembly, Complete, Revision T | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 300.915(a)(9)(i)(E) | ASTM D 3278 | 1978 | Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus | ASTM International | |
Coast Guard | 46 CFR 160.055-3(h) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.077-19(d)(2) | Federal Standard 191 | 1978 | Method 5100, Strength and Elongation, Breaking of Woven Cloth: Grab Method | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 98.7(p)(2) | AAPG Publication | 1978 | Alaska Geological Province Boundary Map, Compiled by the American Association of Petroleum Geologists Committee on Statistics of Drilling in cooperation with the USGS | American Association of Petroleum Geologists | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 289.2 | 1978 | Zinc (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-3, Method 5, Section 7.1.1 | ASTM D 2986 | 1978 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Coast Guard | 46 CFR 160.171-17(h) | UL 1191 | 1977 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 40 CFR 60.632(f) | ASTM E 168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.3 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 61.245(e)(3) | ASTM D 2504 | 1977 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(8) | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Food and Drug Administration | 21 CFR 177.1560(a) | ASTM D 2857 | 1977 | Standard Method of Test for Dilute Solution Viscosity of Polymers | ASTM International | |
Coast Guard | 40 CFR 60.593a(b)(2) | ASTM E 168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 553 | 1977 | Blanket and Felt Mineral Fiber Insulation (Industrial Type) | ASTM International | |
Coast Guard | 46 CFR 160.052-5(e) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 147.650(a)(7) | IDUIC regulations | 1977 | Waste Disposal and Injection Wells, Title 42, Chapter 39, Idaho Code, sections 42-3901 through 42-3914 (Bobbs-Merrill 1977), sections 42-3915 through 42-3919 (Supp. 1984) | State of Idaho | |
Minerals Management Service | 30 CFR 700.5, Anthracite | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.360-4(a)(2) | ANSI B16.5 | 1977 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Coast Guard | 46 CFR 161.002-4(b)(1) | IEC 533 | 1977 | Electromagnetic Compatibility of Electrical and Electronic Installations in Ships | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 763 Appendix A (II)(J)(5) | EPA-600-4-77-027a | 1977 | Quality Assurance Handbook for Air Pollution Measurement System. Ambient Air Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 91.316(b)(2)(i) | SAE Paper 770141 | 1977 | Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts | Society of Automotive Engineers | |
Coast Guard | 46 CFR 116.1030(b) | ANSI Z26.1 | 1977 | Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways including 1980 Supplement | American National Standards Institute |