This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 69 | 2014 | Explosion Suppression Systems | National Fire Protection Association | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1030 | SAE J2264_201401 | 2014 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table Note 9 | APHA Standard Methods On-Line | 2014 | On-line editions of Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Transportation Department | 85 FR 80544 | 49 CFR 221 | AAR S–4210 | 2014 | Miscellaneous Amendments to Brake System Safety Standards and Codification of Waivers | Association of American Railroads |
Federal Aviation Administration | 14 CFR 27.613(d)(3) | ANC 18 | 2014 | Design of Wood Aircraft Structures | Superintendent of Documents, U.S. Government Printing Office | |
Environmental Protection Agency | 40 CFR 272, Subpart C | AKHWMP | 2014 | State of Alaska Hazardous Waste Management Program (Reserved) | State of Alaska | |
Environmental Protection Agency | 40 CFR 430, Appendix A | EPA Method 1653 | 2014 | Chlorinated Phenolics in Wastewater by In Situ Acetylation and GCMS | U.S. Environmental Protection Agency | |
Transportation Department | 87 FR 44944 | 49 CFR 171 | ISO 14246:2014/Amd 1:2017 | 2014 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Occupational Safety and Health Administration | 29 CFR 1910.107 | 29 CFR 1910.107(b)(5) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i) | 29 CFR 1910.107(b)(9) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Federal Communications Commission | 80 FR 33439 | 47 CFR 2.910(c)(1) | ANSI C63.4-2014 | 2014 | American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | American National Standards Institute |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | API RP 500 | 2014 | Update to Electrical Engineering Regulations | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 272, Subpart H | CTHWMP | 2014 | State of Connecticut Hazardous Waste Management Program (Reserved) | State of Connecticut | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 86 | SAE J2264_201401 | 2014 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Nuclear Regulatory Commission | 87 FR 65128 | 10 CFR 50 | ASME NQA–1-2015 | 2015 | American Society of Mechanical Engineers 2019-2020 Code Editions | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 435.13 Note 11(a) | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.III.1.NC-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Energy Department | 87 FR 37685 | 10 CFR 431 | ANSI C82.6– 2015 (R2020) | 2015 | Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures | American National Standards Institute |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.VIII.3-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.3.1 | APHA Method 608 | 2015 | Tentative Method of Analysis for Strontium90 Content of Atmospheric Particulate Matter | American Public Health Association | |
Environmental Protection Agency | 40 CFR 268.40(b) | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.41(e) | EPA Method 1647 | 2015 | Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995 | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | IEEE C37.27—2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant resin (2) | UL 1746 | 2015 | Standard for External Corrosion Protection Systems For Steel Underground Storage Tanks | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 59.508(a) | EPA Method 311 | 2015 | Analysis of Hazardous Air Pollutant Compounds in Paints and Coatings by Direct Injection into a Gas Chromatograph (40 CFR part 63, appendix A | U.S. Environmental Protection Agency | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(viii)(A) | AASHTO LTS-6-I1 | 2015 | Interim Revisions to Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(4) | APHA Method 602 | 2015 | Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.45 Note 4 | EPA Method 1619 | 2015 | Suspended Particulate Phase (SPP) Toxicity Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 260.11(c)(2) | EPA Method 1664 | 2015 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, PB99–121949 | U.S. Environmental Protection Agency | |
Transportation Department | 85 FR 27810 | 49 CFR 172 | UN Manual of Tests and Criteria Rev. 6/Amend. 1 | 2015 | Hazardous Materials: Harmonization With International Standards | United Nations |
Environmental Protection Agency | 40 CFR 265.195(f)(2) Note | API 1632 | 2015 | Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(66) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 435.13 Note 11(a) | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Energy Department | 88 FR 36217 | 10 CFR 431 | ASTM D396–14a | 2015 | Energy Conservation Program: Test Procedure for Commercial Warm Air Furnaces | ASTM International |
Environmental Protection Agency | 40 CFR 763 Appendix A (III)(L)(6) | EPA Method 2A | 2015 | Direct Measurement of Gas Volume through Pipes and Small Ducts, 40 CFR Part 60 Appendix A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 55.14(e) | EPA Publication | 2015 | State and local OCS requirements | U.S. Environmental Protection Agency | |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.III.1.ND-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Transportation Department | 87 FR 44944 | 49 CFR 175 | ISO 17879:2017 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 430.01(i) Table | EPA Method 1613 | 2015 | Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4024 | 2015 | Standard Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges | ASTM International | |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.VIII.3-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 272, Subpart ZZ | WYHWMP | 2015 | State of Wyoming Hazardous Waste Management Program (Reserved) | State of Wyoming | |
Federal Trade Commission | 93 FR 20788 | 16 CFR 460.5 (e)(2)(ix) | ASTM C 1371-15 | 2015 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers | ASTM International |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.3.2 | APHA Method 602 | 2015 | Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere | American Public Health Association | |
Environmental Protection Agency | 40 CFR 268.40(f) | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.5935 Low Flame Spread/Low Smoke Products | ASTM E 84 | 2015 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Energy Department | 82 FR 59947 | 10 CFR 851 | NFPA 70E | 2015 | Worker Safety and Health Program | National Fire Protection Association |
Federal Highway Administration | 23 CFR 625.4(d)(1)(ix) | AASHTO LRFDLTS-1 | 2015 | LRFD Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(5) | APHA Method 608 | 2015 | Tentative Method of Analysis for Strontium90 Content of Atmospheric Particulate Matter | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.11(hh) | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency |