This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 431.15(b)(2) | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 9809-2 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa | International Organization for Standardization | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.53(a) | National Formulary | 1980 | Formula No. 27-A | U.S. Pharmacopeial Convention | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S7.2 | SAE J-1703 | 1995 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Coast Guard | 33 CFR 164.03(b) | CIA 3 | 1980 | Standard Test Methods for Fiber Rope Including Standard Terminations | Cordage Institute | |
Food and Drug Administration | 21 CFR 177.1590(c) | ASTM D 968 | 1981 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Falling Abrasive Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(45) | ANSI S1.11 | 1976 | Specification for Octave, Half-Octave and Third-Octave Band Filter Sets | American National Standards Institute | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(1)(iii) | ASTM D 1045 | 2008 | Standard Test Methods of Sampling and Testing Plasticizers used in Plastics | ASTM International | |
Interior Department | 43 CFR 11.83(c)(2)(ii) | ILAC Publication | 1973 | Uniform Appraisal Standards for Federal Land Acquisition | Interagency Land Acquisition Conference | |
Research and Special Programs Administration | 49 CFR 178.51(j)(3)(i) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Coast Guard | 46 CFR 63.05-1(e)(2) | IMO MARPOL 73/78 | 1978 | The International Convention for the Prevention of Pollution from Ships (MARPOL 73/78), Annexes I, II, III, and V | International Maritime Organization | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.117(c) | ASTM D 1153 | 1977 | Standard Specification for Methyl Isobutyl Ketone | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (50) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 101.4(h) | AHPA Publication | 1992 | Herbs of Commerce | American Herbal Products Association | |
Coast Guard | 46 CFR 160.077-19(c)(16) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Rural Utilities Service | 7 CFR 1755.890(k)(8)(iii)(A) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.111(l) | ASTM D 323 | 1982 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | APA U813L | 1990 | Design and Fabrication of Plywood Stressed Skin Panels, Suppl. 3 | APA--The Engineered Wood Association | |
Environmental Protection Agency | 40 CFR 1065.705(b)(3) | IP-501 | 2005 | Determination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil by ashing, fusion and inductively coupled plasma emission spectrometry | Energy Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 548.1 | 1992 | Endothall by Ion Exchange, Methylation, GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (14) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Environmental Protection Agency | 40 CFR 98.354(d)(2) | ASME MFC-5M | 1985 | Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1724.55(a)(2) | USACE ER 1110-2-1155 | 1995 | U.S. Army Corps of Engineers Engineering and Design Dam Safety Program, Appendix E | Department of the Army, U.S. Army Corps of Engineers | |
Environmental Protection Agency | 40 CFR 1051.501(e) | 40 CFR 1065.405 | 2012 | Test engine preparation and maintenance | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF Footnote 1 | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1251(a)(4) | MSUIC regulations | 1987 | State of Mississippi Oil and Gas Board Statewide Rules and Regulations, Rules 1 through 65, inclusive (Aug. 1, 1987, as amended, Sept. 17, 1987) | State of Mississippi | |
Environmental Protection Agency | 40 CFR 63.772(a)(1)(ii) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 98.36(e)(2)(xi) | ASTM D 6866 | 2008 | Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. B, 1.8 | AHAM HRF-1 | 2008 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 160.151-15(a) | MIL-C-17415F | 1989 | Cloth, Coated, and Webbing, Inflatable Boat and Miscellaneous Use | U.S. Department of Defense | |
National Archives and Records Administration | 36 CFR 1238.5(c)(2) | AIIM MS5 | 1998 | Standard for Information and Image Management-Nicrofiche | Association for Information and Image Management | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.935(b)(1)(iv) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Food and Drug Administration | 21 CFR 172.736(b)(2) | Food Chemicals Codex | 2004 | Hydroxyl Value | National Academy Press | |
Public Health Service | 42 CFR 84.113 | ANSI K13.1 | 1973 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 86.1(g)(8) | SAE J-1939 | 2007 | Recommended Practice for a Serial Control and Communications Vehicle Network | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.5037(a) | ANSI N13.8 | 1973 | Radiation Protection in Uranium Mines | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.113(a)(2) | Drawing No. 78051-64 | 1987 | Torque jam nut | General Motors Corporation | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xxvi) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section XI, IWA-4540(c) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 151.15-3(g)(2)(ii) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Federal Aviation Administration | 14 CFR 91.227(a) | FAA TSO-C166b | 2009 | Extended Squitter Automatic Dependent Surveillance-Broadcast (ADS-B) and Traffic Information Service-Broadcast (TIS-B) Equipment Operating on the Radio Frequency of 1090 Megahertz (MHz) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (105) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(c)(1) Table (Low Level Amperometric Titration) | APHA Method 4500-Cl E | 2014 | Chlorine by Low-Level Amperometric Direct Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(51) | ASTM D 4177 | 2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IE (5) | APHA Method 7500-Ra C | 2001 | Radium 226 - Emanation | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (66) | APHA Method 4500-S(2-) B | 2000 | Sulfide (as S), Separation of Soluble and Insoluble Sulfides | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 515.1 | 1995 | Chlorinated acids Liquid/Liquid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41b Distillate oil | ASTM D 6751 | 2012 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 60.106a(a)(3)(ii) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-12A | 1974 | Specification for L-801 Beacon | Federal Aviation Administration, U.S. Department of Transportation |