This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | APHA Method 3111 B | 1995 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-12B, 8.2.7 | ASTM D 6911 | 2003 | Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis | ASTM International | |
Food and Drug Administration | 21 CFR 178.3297(e) | CC Publication | 1994 | Determination of PAH Content of Carbon Black | Cabot Corporation | |
Consumer Product Safety Commission | 16 CFR 1203.53(a)(4) | Snell B-90 | 1990 | Standard for Protective Headgear for Use in Bicycling | Snell Memorial Foundation | |
Coast Guard | 46 CFR 52.01-145 | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.002-3(a) | 46 CFR 164.003 | 2012 | Kapok, Processed | U.S. Coast Guard | |
Coast Guard | 21 CFR 177.1585(c)(1)(i) | GE Publication | 1985 | Intrinsic Viscosity (IV) of Lexan Polycarbonate Resin By a Single Point Method using Dichloromethane as the Solvent | General Electric Co. | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(14) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Coast Guard | 46 CFR 25.01-3(b) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 54.01-35(b)(4) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (47) | EPA Method 253.2 | 1978 | Palladium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.3.3 | ASTM D 3176 | 1989 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB Footnote 46 | USGS Open File Report (OFR) 93-449 | 1993 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Chromium in Water by Graphite Furnace Atomic Absorption Spectrophotometry | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 21 CFR 177.1020(d)(2) | FDA Publication | 1990 | Extracted Acrylonitrile Monomer by Differential Pulse Polarography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 63.14(g)(34) | ASTM D 3257 | 1993 | Standard Test Method for Aromatics in Mineral Spirits by Gas Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 184.1979(b)(2) | Food Chemicals Codex | 1996 | Whey | National Academy Press | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.6, a | ASHRAE 51 | 1999 | Laboratory Methods for Testing Fans for Aerodynamic Performance Rating | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.151-15(i) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(31) | ASTM D 4815 | 2013 | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 10 | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | AOAC Method 974.27 | 1990 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 98.344(c)(1) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Methyl formate) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2400(b)(2) | WAUIC regulations | 1980 | Revised Code of Washington, chapter 43.21A (Bureau of National Affairs, 1980 Laws), entitled “Department of Ecology,” as amended by 1983 Washington Laws, Chapter 270 | State of Washington | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(f) | EPA SW-846-7471B | 2007 | Mercury In Solid Or Semisolid Waste (Manual Cold-Vapor Technique), Revision 2 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1915.134(c) | ANSI B7.1 | 1964 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Coast Guard | 46 CFR 54.25-20(c) | ASME B&PV Code | 1997 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 754 | 1988 | Installation of Steel Framing Members to Receive Screw-Attached Gypsum | ASTM International | |
Coast Guard | 27 CFR 21.60(b)(1) 249 | National Formulary | 1980 | Formula No. 33 | U.S. Pharmacopeial Convention | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.5.4.1 | ASTM B 117 | 1973 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A 153 | 1987 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. C, 2.6.3.1(A) | AHAM DW-1 | 1992 | Household Electric Dishwashers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 13.207 | IMO Resolution A.437 (XI) | 1979 | Training of Crews in Fire Fighting | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(2) | Drawing No. 78051-90 | 1978 | Neck Assembly, Revision A | General Motors Corporation | |
Minerals Management Service | 30 CFR 250.1202(a)(2)(i) | API MPMS | 2013 | Chapter 4, Section 8 | American Petroleum Institute | |
Coast Guard | 46 CFR 110.10-1(c)(1) | ANSI/IEEE C37.12 | 1991 | American National Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis-Specifications Guide | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 179.200-9(a) | AAR Publication | 2000 | Specification for Tank Cars, Appendix E | Association of American Railroads | |
Rural Utilities Service | 7 CFR 1755.390(i)(5)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 80.580(c)(2)(i) | ASTM D 6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(60) | ASTM D 1552 | 1983 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1615.4(a)(9) Footnote 3 | ASTM D 2654 | 1967 | Method of Test for Amount of Moisture in Textile Materials | ASTM International | |
Federal Aviation Administration | 14 CFR 71.5 | FAA Order 7400.9X | 2013 | Airspace Designations and Reporting Points | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | APHA Method 6420 B | 2000 | Phenols by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | EPA Method 551.1 | 1995 | Determination of Chlorination Disinfection Byproducts, Chlorinated Solvents, and Halogenated Pesticides/Herbicides in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(24) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(i) | EPA Publication | 1978 | Methods for Benzidine, Chlorinated Organic Compounds, Pentachlorophenol and Pesticides in Water and Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (64) | EPA Method 120.1 | 1982 | Conductance (Specific Conductance, umhos at 25 degrees C) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 10 | EPA Method 100.2 | 1994 | Determination of Asbestos Structure Over 10-?m In Length In Drinking Water, EPA-600-R-94-134 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41c Natural gas (2) | ASTM D 1835 | 1987 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International |