This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C3 | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Environmental Protection Agency | 40 CFR 75.59(b)(6)(iii) | ASTM D 7036 | 2004 | Standard Practice for Competence of Air Emission Testing Bodies | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.146(k) | Part No. 210-0000 | 2001 | Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Parathion) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart Q | IAHWMP | 2014 | State of Iowa Hazardous Waste Management Program (Reserved) | State of Iowa | |
Food and Drug Administration | 21 CFR 137.250(b)(1)(iii) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
Federal Communications Commission | 47 CFR 80.1101(c)(4)(i) | IMO Resolution A.806(19) | 1995 | Performance Standards for Shipborne MF/HF Radio Installations Capable of Voice Communication, Narrow-Band Direct Printing and Digital Selective Calling | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(70) | ANSI Z87.1 | 1998 | Practice of Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. F, 4.2 | IEC 62301 | 2005 | Household electrical appliances—Measurement of standby power | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 52.741(a)(3), Heavy Liquid | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(43) | ASTM D 6751 | 2012 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Rural Utilities Service | 7 CFR 1755.522(a)(5) | Bellcore SR-TSV-002275 | 1990 | BOC Notes on the LEC Networks-1990, Issue 1 | Bell Communications Research | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.3(b)(1) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Coast Guard | 33 CFR 101.505(a) | IMO Conference Resolution 2 | 2002 | ISPS Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.052-5(b) | Drawing No. 160.052-1, Sheet 3 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Cutting Pattern and General Arrangement, Model CPS | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 94.204(f) | Annex VI of MARPOL 73/78 | 1997 | Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines | International Maritime Organization | |
Food and Drug Administration | 21 CFR 173.60(b)(3) | FDA Publication | 1989 | Determination of Epichlorophydrin and 1,3-Dichloro-2-Propanol in Dimethylamine-Epichlorohydrin Copolymer | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 261.22(a)(2) | EPA Method 1110 A | 2004 | Corrosivity Toward Steel | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(9) | NFPA 51B | 1962 | Standard for Fire Protection in Use of Cutting and Welding Processes | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 189.175(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 2 | ASTM E 662 | 2001 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (21) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Aluminum) | APHA Method 3111 B | 1992 | Metals by Flame Atomic Absorption | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (21) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Hexachlorobenzene) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2(1)(c)(ii) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(ii) | A Policy on Design Standards—Interstate System | 2016 | A Policy on Design Standards—Interstate System | American Association of State Highway and Transportation Officials | |
Occupational Safety and Health Administration | 29 CFR 1910.106(i)(3)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section I, Fired Pressure Vessels | American Society of Mechanical Engineers | |
National Archives and Records Administration | 36 CFR 1238.5(c)(1) | AIIM MS1 | 1996 | Recommended Practice for Alphanumeric Computer-Output Microforms--Operational Practices for Inspection and Quality Control | Association for Information and Image Management | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | NSF 24 | 1988 | Plumbing System Components for Manufactured Homes and Recreational Vehicles | National Sanitation Foundation | |
Coast Guard | 33 CFR 140.7(b) | UL 1123 | 1987 | Marine Buoyant Devices | Underwriters Laboratories, Inc. | |
Mine Safety and Health Administration | 30 CFR 56.6133(b) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
Coast Guard | 40 CFR 136.3(a) Table IB (6) | ASTM D 2972A | 2003 | Arsenic by UV-Vis Spectrometry | ASTM International | |
Research and Special Programs Administration | 49 CFR 193.2059(a) | GRI-96/0396.5 | 1997 | Evaluation of Mitigation Methods for Accidental LNG Releases | Gas Research Institute | |
Environmental Protection Agency | 40 CFR 52.742(a)(9) | ASTM D 2372 | 1985 | Standard Method of Separation of Vehicle from Solvent-Reducible Paints | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(p)(1) | AAPG Publication | 1991 | Geologic Note: AAPG-CSD Geologic Provinces Code Map: AAPG Bulletin, Prepared by Richard F. Meyer, Laure G. Wallace, and Fred J. Wagner, Jr., Volume 75, Number 10, pages 1644-1651 | American Association of Petroleum Geologists | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(i) | ISO 11118 | 1999 | Gas cylinders--Non-refillable metallic gas cylinders--Specification and test methods | International Organization for Standardization | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (4) | ASTM D 6919 | 2009 | Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (23) | ASTM D 2036A | 2009 | Standard Test Methods for Cyanides in Water, Total Cyanides after Distillation | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(199) | ASTM E 260 | 1996 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 160.151-31(d) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(vii) | ASTM D 2583 | 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | APHA Method 4500-NH3 H | 1997 | Ammonia by Flow Injection Analysis | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 3 | Annual Book of Standards | 2003 | Annual Book of ASTM Standards, Vols. 11.01 and 11.02 | ASTM International | |
Environmental Protection Agency | 40 CFR 55.14(e)(3)(ii)(G) | 40 CFR part 52, subpart F | 2009 | State of California, South Coast Air Quality Management District Requirements Applicable to OCS Sources (Parts I, II and III) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(o)(2)(iii) | ASTM D 6792 | 2013 | Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories | ASTM International | |
Coast Guard | 46 CFR 160.115-5(b)(1) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(9) | Drawing No. SA-572-S10 | 1987 | Force sensing device | National Highway Traffic Safety Administration, U.S. Department of Transportation |