This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 54.15-5(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 21 CFR 177.2480(c)(3) | ASTM D 1505 | 1979 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 161 | 1993 | Standard Specification for Nickel Seamless Pipe and Tube | ASTM International | |
Coast Guard | 46 CFR 160.115-13(d)(1) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.177(d) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(1)(i)(F) | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section D Fecal Streptococci, 2 Membrane Filter (MF) Method, page 136 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUU, Table 4, (8)(a)(i)(2)(a) | ASTM D 5790 | 1995 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | ASTM International | |
Coast Guard | 45 CFR 162.920(c)(1)(iii) | CAQH Publication | 2011 | Phase I CORE 154: Eligibility and Benefits 270/271 Data Content Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Veterans Affairs Department | 38 CFR 17.63(a)(2) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Energy Department | 10 CFR 430.2, Definitions, General service incandescent lamp (21) | ANSI C79.1 | 2002 | Nomenclature for Glass Bulbs Intended for Use with Electric Lamps | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(e) | ASTM E 871 | 1982 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.806(a)(2)(i) | ASME SPPE-1d | 1996 | Addendum to Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Agricultural Marketing Service | 7 CFR 51.888(a) | CA State Regulations | 1996 | California Code of Regulations, Title 3, Subchapter 4. Fresh Fruits, Nuts and Vegetables, Article 25, Table Grapes and Raisins | State of California, Code of Regulations | |
Veterans Affairs Department | 38 CFR 17.81(a)(1)(i) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Glazing surface reference line | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (45) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 5174 | 1997 | Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 1072 | 1990 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Rural Utilities Service | 7 CFR 1755.97(b)(15) | RUS Bulletin 1753F-151, Form 515b | 2001 | Specifications and Drawings for Construction of Underground Plant | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 60.17(g)(55) | ASTM D 1266 | 1991 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Food and Drug Administration | 21 CFR 177.1630(e)(4)(v) | ASTM D 2117 | 1982 | Tentative Method of Test for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0024 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Nuclear Regulatory Commission | 10 CFR 50.55a(e)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(1) | UL 80 | 1963 | Standard for Steel Inside Tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (49) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 6010 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.163 | NFPA No. 26 | 1988 | Supervision of Valves | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 27.613(d)(2) | MIL-HDBK-17 | 1960 | Plastics for Aerospace Vehicles | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.6 | 2003 | Derricks | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-47 | 1975 | Isolation Transformers for Airport Lighting Systems | Federal Aviation Administration, U.S. Department of Transportation | |
National Archives and Records Administration | 36 CFR 1238.14(d)(1)(i) | AIIM MS23 | 1998 | Standard Recommended Practice--Production, Inspection, and Quality Assurance of First-Generation, Silver Microforms of Documents | Association for Information and Image Management | |
Rural Utilities Service | 7 CFR 1755.397(b)(3) | Bellcore TR-NWT-000303 | 1992 | Integrated Digital Loop Carrier System Generic Requirements, Objectives, and Interface | Bell Communications Research | |
Environmental Protection Agency | 40 CFR 136.3(b)(25)(i) | NCASI Technical Bulletin 253 | 1971 | An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Coast Guard | 21 CFR 172.167(d)(2) | HCC Publication | 1991 | Manual from the Hydrogen Peroxide Test Kit, Model HYP-1, Catalog Number 22917-00 | Hach Chemical Company | |
Research and Special Programs Administration | 49 CFR 195.3(c) E2 | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 265.1063(d)(1) | ASTM E 168 | 1988 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(b) | SAE J-581 | 2004 | Auxiliary Upper Beam Lamps | Society of Automotive Engineers | |
Coast Guard | 46 CFR 52.01-120(c)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (42) | APHA Method 5310 C | 2000 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | ASTM D 3559D | 1996 | Standard Test Methods for Lead in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 220.1 | 1971 | Copper (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(22) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.6201(a)(2) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 5310 D | 2000 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Coast Guard | 46 CFR 110.10-1(g)(14) | IEC 79-18 | 1992 | Electrical Apparatus for Explosive Gas Atmospheres | International Electrotechnical Commission | |
Labor Department | 41 CFR 50-204.2(a)(3) | 49 CFR 179 | 2012 | Specifications for Tank Cars | U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 173.469(d)(1) | ISO 2919 | 1980 | Sealed Radioactive Sources--Classification | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(27) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 1.5 | ANSI C78.81 | 2003 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-15(d) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization |