This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 16 CFR 1201.4(b)(3)(ii) | ASTM G 26 | 1970 | Standard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials | ASTM International | |
Research and Special Programs Administration | 49 CFR 192.189(c) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 147.2850 | RPUIC regulations | 2019 | State-administered program (Reserved) | Trust Territory of the Pacific, Republic of Palau | |
Environmental Protection Agency | 40 CFR 265.1084(c)(3)(ii)(B) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 300.915(c)(8) | ASTM D 93 | 1990 | Standard Test Method for Flash Point by Pensky-Martens Closed Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.900(k)(5) | IME Publication 20 | 1971 | Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps | Institute of Makers of Explosives | |
National Highway Traffic Safety Administration | 49 CFR 572.121 Table A | Drawing No. 127-1015 | 1987 | Neck Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.131(c)(1) Table (Amperometric Method II) | APHA Method 4500-ClO2 E | 2000 | Chlorine Dioxide, Amperometric Method II | American Public Health Association | |
Federal Trade Commission | 16 CFR 460.5(a) | ASTM C 177 | 2004 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot-Plate Apparatus | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(58) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 160.002-1(b) | DWG No. F-49-6-1 (Sheet 1A) | 2012 | Alternate Stitching of Tapes and Webbing (Adult and Child) | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 86.157-98(f)(3) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Federal Aviation Administration | 14 CFR 91.851 Chapter 4 Noise Level | ICAO Annex 16 | 2002 | Maximum Noise Levels, Volume I, Amendment 7, Chapter 4, Paragraph 4.4 | International Civil Aviation Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (108) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 506 | 1995 | Determination of Phthalate and Adipate Esters in Drinking Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Gas Chromatography with Photoionization Detection | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 184.1250(b) | Food Chemicals Codex | 1996 | Cellulase Enzyme Preparation Derived from Trichoderma Longibrachiatum | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1530(b) | Food Chemicals Codex | 1996 | Niacin | National Academy Press | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (70) | EPA Method 279.1 | 1978 | Thallium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 172.102(c)(1) TP 32 | UN Code | 2003 | UN Manual of Tests and Criteria | United Nations | |
Environmental Protection Agency | 40 CFR 63.14(g)(46) | ASTM D 4017 | 1990 | Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method | ASTM International | |
Environmental Protection Agency | 40 CFR 80.613(e)(3)(iii)(C) | ASTM E 29 | 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 60.261(o) Silicomanganese | ASTM A 483 | 1964 | Standard Specification for Silicomanganese | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(d)(3) | 35 I.A.C. 215, Subpart E | 1989 | Sections 215.182-215.184 | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.703(g)(4) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.41b Distillate oil | ASTM D 396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4024 | 2015 | Standard Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges | ASTM International | |
Environmental Protection Agency | 40 CFR 1051.501(d)(2)(ii) | 40 CFR 1051.515(b) | 2012 | Permeation test run | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.179(c)(2) | ANSI A14.3 | 1956 | Safety Requirements for Fixed Ladders | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3282.358(d) | ASTM E 541 | 2010 | Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.75(a) | Drawing No. SA 106C 060 | 1997 | Pelvis Assembly, Revision A | Reprographic Technologies | |
Coast Guard | 46 CFR 184.240(a) | NFPA 306 | 1993 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xxi) | ASTM D 1426 | 2008 | Standard Test Methods for Ammonia Nitrogen in Water | ASTM International | |
Coast Guard | 33 CFR 183.435(a)(4) | UL 1426 | 1987 | Cables for Boats | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 172.167(d)(2) | HCC Publication | 1991 | Manual from the Hydrogen Peroxide Test Kit, Model HYP-1, Catalog Number 22917-00 | Hach Chemical Company | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B 21 | 1996 | Standard Specification for Naval Brass Rod, Bar, and Shapes | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-2 | ASHRAE 55 | 1992 | Thermal Environmental Conditions for Human Occupancy including addenda 55a-95 (RS-2) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | AWWA C 207 | 1955 | Steel Pipe Flanges | American Water Works Association | |
Coast Guard | 46 CFR 147.45(f)(4) | UL 1185 | 1984 | Standard for Portable Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.170-7(b)(3) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (10) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(95) | ASTM D 2382 | 1976 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Food and Drug Administration | 21 CFR 175.300(b)(3)(xxxiii) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.145(a) | Part No. 210-0000 | 2001 | Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Methoxychlor) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | ASTM D 3559D | 2008 | Standard Test Methods for Lead in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Coast Guard | 40 CFR 60, Appendix B, PS-1, 8.1(1) | ASTM D 6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.106(e) | API 5L | 2004 | Specification for Line Pipe | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 147.2251(a)(2) | UTUIC regulations | 1989 | The Oil and Gas Conservation General Rules, adopted under the authority of the Oil and Gas Conservation Act, 40-6-1 et seq., Utah Code Annotated, as amended 1988 (revised March 1989), rules R615-1 through R615-4, and R615-8 through R615-10 | State of Utah | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(10) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME B16.29 | 1986 | Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings--DWV | American Society of Mechanical Engineers |