This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.151-15(a) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1060.105(f)(3) | ABYC H-25 | 2010 | Portable Marine Gasoline Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 1659 | 1993 | The Determination of Dazomet in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | EPA Method 272.2 | 1978 | Silver (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.334(b)(2)(iii) | ASTM C 25 | 2006 | Standard Test Method for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropyl ether) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1050(a)(5) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 08, Chapter 04, promulgated and effective as of March 1, 1989 | State of Maryland | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.157 | ANSI/NFPA 10 | 2014 | Portable Fire Extinguishers | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(e) | ASTM D 3173 | 2003 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
National Archives and Records Administration | 36 CFR 1234.14(b)(3) | NAPM IT9.25 | 1998 | Imaging Materials--Optical Disc Media--Storage | Association for Information and Image Management | |
Food and Drug Administration | 21 CFR 168.111(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60.111(b) | ASTM D 396 | 1978 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 761.75(b)(8)(iii) | ASTM D 3278 | 1989 | Standard Test Method for Flash Point of Liquids by Setaflash Closed-Cup Apparatus | ASTM International | |
Interior Department | 43 CFR 11.34(a) | DOI NRDAM/CME | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
Minerals Management Service | 30 CFR 870.18(c) | ASTM D 5192 | 1991 | Standard Practice for Collection of Coal Samples from Core | ASTM International | |
Energy Department | 10 CFR 434.402.1.2.4 | NFRC 200 | 1995 | Procedure for Determining Fenestration Product Solar Heat Gain Coefficients at Normal Incidence (RS-19) | National Fenestration Rating Council | |
Rural Utilities Service | 7 CFR 1755.506(h) | IEEE C2 | 1997 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Energy Department | 10 CFR 431.20(c)(3) | ISO Guide 27 | 2003 | Guidelines for corrective action | International Organization for Standardization | |
National Archives and Records Administration | 36 CFR 1235.46(b)(3) Table | ISO/IEC 16382 | 2000 | Information Technology--Data Interchange on 12.7 mm 208-track Magnetic Tape Cartridges--DLT 5 Format | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 1048.105(a) | SAE J-2260 | 2004 | Non-metallic Fuel System Tubing with One or More Layers | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.85(b)(1) | Drawing No. LP 1049-17 through LP1049-30 | 1979 | 9-month old Dummy Components and Parts for Arms | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1728.97(e)(11) | AWPA P5 | 2008 | Standard for Waterborne Preservatives | American Wood Protection Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(35) | API MPMS | 2007 | Chapter 11.2.2 | American Petroleum Institute | |
Veterans Affairs Department | 38 CFR 17.74(p)(3)(i) | NFPA 13R | 2010 | Installation of Sprinkler Systems in Residential Occupancies Up To and Including Four Stories in Height | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 36 Appendix G G36.105(e) | IEC 651 | 1979 | Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (99) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM Annual Book of Standards | 2001 | Water and Environmental Technology, Section 11.01 | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(7) | ASTM D 975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(d)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | USGS I-4471-97 | 1997 | Metals by Inductively Coupled Plasma | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 1 | EPA-600-4-79-020 | 1983 | Methods for Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 33 CFR 145.01 | NFPA 10 | 2010 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 21 CFR 177.1595(c)(1) | FDA Publication | 1995 | Intrinsic Viscosity of ULTEM Polyetherimide Using Chloroform as a Solvent | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 63.5350(b) | ASTM D 2099 | 2000 | Standard Test Method for Dynamic Water Resistance of Shoe Upper Maeser Water Penetration Tester | ASTM International | |
Coast Guard | 33 CFR 164.74(a)(3)(i) | CIA 3 | 1980 | Standard Test Methods for Fiber Rope Including Standard Terminations | Cordage Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 25d | 1973 | Power Driven, Mechanically Driven and Manually Driven Fasteners | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 52, Subpart F | CASIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of California | |
Occupational Safety and Health Administration | 10 CFR 430 Subpart B, App. J1, 2.6.4.5.3 | AATCC 79 | 2000 | Absorbency of Bleached Textiles | American Association of Textile Chemists and Colorists | |
Coast Guard | 40 CFR 136.3(a) Table IE (5) | ASTM D 3454 | 1991 | Standard Test Method for Radium-226 in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.564(f)(3) | ASTM D 4809 | 1995 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
Coast Guard | 46 CFR 56.95-10(c)(1)(i) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 761.75(b)(8)(iii) | ASTM D 93 | 1990 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 28.40(b) | SAE J-1475 | 1984 | Hydraulic Hose Fittings for Marine Applications | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 180.515(a) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Coast Guard | 33 CFR 127.1102(a)(4)(ii) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Federal Highway Administration | 23 CFR 645.211 | AASHTO Publication | 2014 | Roadside Design Guide | American Association of State Highway and Transportation Officials | |
Coast Guard | 46 CFR 160.156-7(b)(23) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(B) | AOAC Method 925.54 | 1998 | Sulfate in Water by Gravimetric Method | AOAC International |