This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 434.701.1 RS-44 | NEMA MG-11 | 1993 | Energy Management Guide for Selection and Use of Single-Phase Motors (RS-44) | National Electrical Manufacturers Association | |
Food and Drug Administration | 21 CFR 146.114(a)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10462 | 2005 | Gas cylinders--Transportable cylinders for dissolved acetylene--Periodic inspection and maintenance | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b)(1)(i)(A)(1) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
National Archives and Records Administration | 36 CFR 1234.3(h)(2) | ASHRAE 62 | 1989 | Ventilation for Acceptable Indoor Air Quality | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(54) | ANSI Z12.20 | 1969 | Code for the Prevention of Dust Explosions in Woodworking and Wood Flour Manufacturing Plants | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3, 3.1.1 | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Housing and Urban Development Department | 24 CFR 200.926d(b)(3)(i) | HUD Handbook 4910.1 | 1994 | Minimum Property Standards for Housing | U.S. Department of Housing and Urban Development | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(i) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | ASTM D 5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.5.1/CSA 7.1-M | 1999 | Gas Clothes Dryers Vol. 1 Type 1 Clothes Dryers with Addendum Z21.5.1A | American National Standards Institute | |
Minerals Management Service | 30 CFR 250.901(d)(8) | ASTM C 94/C 94M | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International | |
National Highway Traffic Safety Administration | 21 CFR 165.110(b)(4)(iii)(E)(6)(iv) | EPA-600-4-91-010 | 1991 | Method 200.8--Determination of Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 444.12(b)(1) Table (11) | APHA Method 3500-Zn F | 1995 | Zinc by Zincon Method | American Public Health Association | |
Coast Guard | 46 CFR 160.077-21(c)(5)(ii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(5) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) | ITS Method D99-003 | 2003 | Free Chlorine Species (HOCl? and OCl?) by Test Strip, Revision 3.0 | Industrial Test Systems, Inc. | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(9) | ASTM D 3649 | 1985 | Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water | ASTM International | |
Coast Guard | 33 CFR 154, Appendix B, 2.1 Note | MSC Circular 373 | 1993 | Revised Standards for the Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 178.45(f)(5)(ii) | NIST Handbook H-28 | 1966 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 33 CFR 154.106(c)(1) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(187) | ASTM D 6751 | 2012 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Coast Guard | 21 CFR 172.167(b) | Food Chemicals Codex | 2008 | Food Chemicals Codex, 6th Edition | U.S. Pharmacopeial Convention | |
Environmental Protection Agency | 40 CFR 91, Subpart D, Appendix A, Table 3 | ASTM D 3231 | 1989 | Standard Test Method for Phosphorous in Gasoline | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(7) | ASTM D 92 | 1997 | Standard Test for Flash and Fire Points by Cleveland Open Cup | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(166) | ASTM D 4810 | 1988 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length of Stain Detector Tubes | ASTM International | |
Food and Drug Administration | 21 CFR 172.841(b) | 1st Supplement, 5th Edition, Food Chemical Index | 2006 | Polydextrose | National Academy Press | |
Veterans Affairs Department | 38 CFR 17.63(a)(4)(ii) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(36) | SAE J-944 | 1980 | Steering Control System—Passenger Car—Laboratory Test Procedure | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Rural Utilities Service | 7 CFR 1755.903(o)(6) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | International Telecommunication Union--Telecommunication | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4)(ii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xvii) | APHA Method 3112 | 2009 | Metals by Cold-Vapor Atomic Absorption Spectrometry | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (45) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 763 Appendix E 1.8(5) | EPA/OPPT No. C00090 | 1979 | Asbestos-Containing Materials in School Buildings: A Guidance Document, Parts 1 and 2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.124(m)(6) | ASME MFC-9M | 2001 | Measurement of Liquid Flow in Closed Conduits by Weighing Method | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 164.018-11(d)(2) | FedSpec CCC-C-426D | 1970 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Rural Utilities Service | 7 CFR 1728.202(d)(1) | AWPA P1/13 | 2006 | Standard for Coal Tar Creosote for Land and Fresh Water and Marine (Coastal) Water Use | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 63.1215(f)(5)(ii) | ASTM D 6735 | 2001 | Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Alachlor) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 261.22(a)(2) | EPA SW-846 | 2004 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 1110A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1282(g)(4)(iii)(B)(3) | ASTM D 3588 | 2003 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Coast Guard | 33 CFR 154, Appendix B, 3.1 | ASTM F 1155 | 1998 | Standard Practice for Selection and Application of Piping System Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(e)(3)(ii)(A) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-27A | 1969 | Specification for L-807 Eight-foot and Twelve-foot Unlighted or Externally Lighted Wind Cone Assemblies | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 54.25-8(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 172.215(b)(1) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers |