This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 30.01-3(b)(1) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | RFCI Publication | 1987 | Recommended Installation Specification for Vinyl Composition, Solid Vinyl, and Asphalt Tile Floorings | Resilient Floor Covering Institute | |
Rural Utilities Service | 7 CFR 1755.902(r)(3) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 431.105(d)(2)(iii) | ASTM D 2156 | 1980 | Standard Method for Smoke Density in Flue Gases from Burning Distillate Fuels | ASTM International | |
Coast Guard | 46 CFR 160.151-21(v) | ISO 18813:2006(E) | 2006 | Ships and marine technology—Survival equipment for survival craft and rescue boats, First Edition | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 572.181 Table A | Drawing No. 175-5500 | 2009 | Lumbar Spine Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(B) | EPA Method 130.1 | 1971 | Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 5 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1468(b)(3) | ASTM D 4444 | 2008 | Standard Test Method for Use and Calibration of Hand-Held Moisture Meters | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1700(a)(2) | NCUIC regulations | 1989 | North Carolina Well Construction Act, N.C. GEN. STAT. §§ 87-83 through 87-99 (1989 and Cumm. Supp. 1989) | State of North Carolina | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | UL 215 | 2020 | Title Unkown | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1918.24(g)(2) | ANSI A14.2 | 1990 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
Coast Guard | 46 CFR 97.01-2(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 52.742(d) | 35 I.A.C. 215, Subpart B | 1989 | Administrative Code | State of Illinois | |
Coast Guard | 46 CFR 160.047-3(f) | MIL-T-43566 | 1991 | Military Webbing | U.S. Department of Defense | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 926 | 1990 | Standard Specification for Application of Portland Cement-Based Plaster | ASTM International | |
Coast Guard | 46 CFR 111.60-13(c) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S7.1 | ASTM D 1193 | 1970 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 1996 | Chapter 3, Section 3 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 761.19(a)(16) | ASTM E 258 | 1987 | Standard Test Method for Total Nitrogen Inorganic Material by Modified Kjeldahl Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.507(b)(2) | NFPA 14 | 2003 | Standard for the Installation of Standpipe, Private Hydrant, and Hose Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 121.240(d) | ABYC A-22 | 1993 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 041 | 1976 | Upper Arm Assembly Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (52) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Minerals Management Service | 10 CFR 430 Subpart B, App. Q, 3.5.2 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | IAPMO PS 31 | 1991 | Material and Property Standard for Backflow Prevention Devices | International Association of Plumbing and Mechanical Officials | |
Research and Special Programs Administration | 21 CFR 177.1520(d)(2)(ii) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Food and Drug Administration | 21 CFR 184.1099(b) | Food Chemicals Codex | 1981 | Tartaric Acid | National Academy Press | |
National Oceanic and Atmospheric Administration | 50 CFR 226.205 | USGS Publication | 1974 | 1:500,000 Scale Hydrologic Unit Maps for the State of Washington | U.S. Geological Survey | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(3) | ANSI B30.5, 5-1.2 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Stability Backward and Forward | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (57) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (1,1-dichloroethane) | EPA Method 524.3 | 2009 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart MMMM, Table 2, Mercury | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | ASTM D 3223 | 1997 | Standard Test Method for Total Mercury in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7060 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(18) | ASTM C 330-05 | 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete | ASTM International | |
Environmental Protection Agency | 40 CFR 60.335(b)(10)(ii) | ASTM D 1072 | 1994 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Food and Drug Administration | 21 CFR 177.2210(b)(3) | ASTM D 2857 | 1977 | Standard Method of Test for Dilute Solution Viscosity of Polymers | ASTM International | |
Environmental Protection Agency | 40 CFR 63.626(d)(3)(v)(A) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method A—Volumetric Method | Association of Florida Phosphate Chemists | |
Federal Communications Commission | 47 CFR 15.118(c)(4) | EIA-IS-132 | 1994 | Cable Television Channel Identification Plan | Electronic Industries Association | |
Food and Drug Administration | 21 CFR 131.147(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Rural Utilities Service | 7 CFR 1728.97(a)(2) | RUS Bulletin 50–15 (DT–3) | 1951 | RUS Specification for Pole Top Pins | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S6.1 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Coast Guard | 46 CFR 56.70-15(g)(1) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | ASTM D 888A | 2009 | Standard Test Methods for Dissolved Oxygen in Water, Titrimetric Procedure–High Level | ASTM International | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(iv) | IEC 561 | 1976 | Electro-acoustical Measuring Equipment for Aircraft Noise Certification | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.1 | ASTM D 5291 | 2002 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.950(a)(1) | SRCC OG-300 | 1993 | Operating Guidelines and Minimum Standards for Certifying Solar Water Heating Systems: An Optional SWH System Certification and Rating Program (except for section 10) | Solar Rating and Certification Corporation | |
Rural Utilities Service | 7 CFR 1755.397(a)(6) | FedSpec H28 | 1978 | Screw-Thread Standards for Federal Services including Change Notices 1, 2, and 3 | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 90.7(b)(1) Table | ASTM D 2700 | 1992 | Standard Test Method for Knock Characteristics of Motor and Aviation Fuels | ASTM International |