This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.302(b)(3) | ISO 11621 | 1997 | Gas cylinders--Procedures for change of gas service | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 572.20 | Drawing No. SA 103C 041 | 1976 | Upper Arm Assembly, Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.17(g)(156) | ASTM D 4294 | 2003 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 89.508(a)(1) | CAARB Test Procedure | 1993 | California Regulations for New 1996 and Later Heavy-Duty Off-Road Diesel Cycle Engines | California Air Resources Board | |
Mine Safety and Health Administration | 30 CFR 75.833(c)(1) | ASTM F 496 | 2002 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(iii) | ISO 527-1:1993(E) | 1993 | Plastics—Determination of tensile properties, Part 1: General Principles, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (32) | USGS I-3399-85 | 1985 | Lead, by Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Food and Drug Administration | 16 CFR 1201.7(b)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Coast Guard | 46 CFR 12.02-7(f) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 691 | 2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature | ASTM International | |
Coast Guard | 46 CFR 161.002-4(b)(3) | ABS Publication | 1996 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.225 S6.2.2.1 | SAE J-826 | 1992 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Energy Department | 10 CFR 440 Appendix A | ARI 470 | 1987 | Desuperheater/Water Heaters | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 160.115-21(a)(1) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(2)(iii) | Drawing No. 175-2000 | 2009 | Neck Assembly Test/Cert | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(2)(ii) | EPA Method 551 | 1990 | Determination of Chlorination Disinfection Byproducts and Chlorinated Solvents in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography With Electron-Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 434.11(t) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Environmental Protection Agency | 40 CFR 80.165(c)(1)(ii) | ASTM D 5598 | 2001 | Standard Specification for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section X | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 54.01-15(a)(3)(i) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 173.31(b)(5) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Food and Drug Administration | 21 CFR 801.420(c)(4) | ANSI S3.22 | 2003 | Specification for Hearing Aid Characteristics | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.1450(a)(6) | NVUIC regulations | 1987 | Nevada Administrative Code [NAC], Regulations and Rules of Practice and Procedure adopted Pursuant to NRS 522.010 through 522.625, Inclusive. July 22, 1987 (amending NAC Chapter 522). | State of Nevada | |
Environmental Protection Agency | 40 CFR 63.5758(a)(3) | ASTM D 1259 | 1985 | Standard Test Method for Nonvolatile Content of Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 600.113-12(f)(1)(iii) | ASTM D 3338/D 3338M | 2009 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels | ASTM International | |
Drug Enforcement Administration | 21 CFR 1311.205(b)(4)(iii) | FIPS Publication 140-2 | 2002 | Federal Information Processing Standard Publication (FIPS PUB) 140-2, Change Notices (12-03-2002), Security Requirements for Cryptographic Modules, including Annexes A through D | National Institute of Standards and Technology, U.S. Department of Commerce | |
Rural Utilities Service | 7 CFR 1755.870(h)(3)(i) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA C-14 | 1979 | Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems | Compressed Gas Association | |
Veterans Affairs Department | 38 CFR 39.63 | IAPMO Publication | 2003 | Uniform Mechanical Code | International Association of Plumbing and Mechanical Officials | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S12.17(b) | ASTM IRM 903 | 2007 | Immersion Oil | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (46) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1300(a)(3) | MOUIC regulations | 1983 | Vernon's Annotated Missouri Statutes chapter 204, §§ 204.006 through 204.470 | State of Missouri | |
Coast Guard | 46 CFR 161.002-4(b)(1) | UL 521 | 1993 | Heat Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 40 CFR 60.614(e)(4) | ASTM D 1946 | 1994 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 268.40, Treatment Standard Table Footnote 7 | EPA Method 9010C | 2004 | Total and Amenable Cyanide: Distillation | U.S. Environmental Protection Agency | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(A) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12D | 1957 | Specification for Large Welded Production Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (50) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 4785 | 2000 | Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water (Superseded) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 3246 | 1996 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Engineers Corps | 33 CFR 222.3(e)(2) | ANSI C2 | 2012 | National Electrical Safety Code | American National Standards Institute | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (15) | ASTM D 512B | 2004 | Chloride by Argentometric Titration | ASTM International | |
Food and Drug Administration | 21 CFR 177.1040(c) Footnote 2 | AOAC Publication | 1981 | Headspace Sampling and Gas-Solid Chromatographic Determination of Residual Acrylonitrile in Acrylonitrile Copolymer Solutions 1981 HHS/FDA | AOAC International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 7460 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Minerals Management Service | 10 CFR 434.701.1 RS-11 | NWWDA 101/I.S. 2 | 1997 | Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors (RS-11) | National Wood Window and Door Association | |
Food and Drug Administration | 21 CFR 177.1050(c)(2) | FDA Publication | 1995 | Molecular Weight of Matrix Copolymer by Solution Viscosity | Food and Drug Administration, U.S. Department of Health and Human Services | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(c) | SAE J-586 | 2000 | Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
Coast Guard | 46 CFR 52.01-135(c) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers |