This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.41da Lignite | ASTM D 388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 63.8600(e)(9) | EPA-454/R-98-015 | 1997 | Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(4)(iii) | IME Pamphlet No. 17 | 1960 | Safety in the Handling and Use of Explosives | Institute of Makers of Explosives | |
Coast Guard | 21 CFR 177.1610(a) | ASTM D 1303 | 1979 | Standard Method of Test for Total Chlorine in Vinyl Chloride Polymers and Copolymers | ASTM International | |
Environmental Protection Agency | 40 CFR 72.2 Diesel fuel | ASTM D 2880 | 1990 | Standard Specification for Gas Turbine Fuel Oils | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.703 | ASTM B 88 | 1993 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | NEMA All Standards | 2013 | All specifications, standards, and codes without specific reference | National Electrical Manufacturers Association | |
Federal Motor Carrier Safety Administration | 49 CFR 393.104(e)(5)(iv) | CIA NRS-1 | 1979 | Nylon Rope Specification, Three- and Eight-Strand Standard Construction | Cordage Institute | |
Rural Utilities Service | 16 CFR 1616.32(a)(1) Note 7 | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.3.2.4 | ASTM D 1826 | 1994 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Interior Department | 43 CFR 11.36(b)(2) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1728.201(e)(1)(iii) | ANSI O5.2 | 2006 | Standard for Wood Products, Structural Glued Laminated Timber for Utility Structures | American National Standards Institute | |
Energy Department | 10 CFR 433.4(a)(1)(i) | ASHRAE 90.1 | 2004 | Energy Standard for Buildings Except Low-Rise Residential Buildings | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Rural Utilities Service | 7 CFR 1728.97(a)(15) | RUS Bulletin 50–56 (T–3) | 1953 | RUS Specification for Steel Plate Anchors for Transmission Lines | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 153.0(a)(1) | IMO Resolution MEPC 18(22) | 1985 | IMO Standards for Procedures and Arrangements for the Discharge of Noxious Liquid Substances | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.127(h) | Drawing No. SA-572-S13 | 1994 | Iliac spine force transducers | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xlv) | ASTM D 3859 | 2008 | Standard Test Methods for Selenium in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C2 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Environmental Protection Agency | 40 CFR 89.120(c)(3)(vi) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Food and Drug Administration | 21 CFR 184.1408(b)(5) | Food Chemicals Codex | 1981 | Arsenic (As) | National Academy Press | |
Federal Railroad Administration | 49 CFR 224.103(b) | ASTM D 4956 | 2004 | Standard Specification for Retroreflective Sheeting for Traffic Control | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (5) | USGS O-2060-01 | 2001 | Pesticides in Water by SPE and HPLC-MS. Official Name: Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by Graphitized Carbon-Based Solid-Phase Extraction and HPLC-MS | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Azinphos Methyl) | EPA Method 622 | 1993 | Organophosphorus Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart OO | RIHWMP | 2014 | State of Rhode Island Hazardous Waste Management Program (Reserved) | State of Rhode Island | |
Environmental Protection Agency | 40 CFR 75.21(g)(9)(i) | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.1345(b)(1) | ASTM D 1505 | 1990 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (75) | ASTM D 1691B | 1990 | Standard Test Methods for Zinc in Water, Atomic Absorption, Chelation-Extraction | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | FedSpec HH-I-1972/2 | 1985 | Polyurethane or Polyisocyanurate Insulation Board Faced with Felt on Both Sides | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.01-2(d)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.047-1(a)(2) | MIL-W-530 | 1988 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | 1990 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.111(l) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.44(b)(1) | Drawing No. SA-SID-005 | 1994 | Thorax Accelerometer, Revision F | Reprographic Technologies | |
Coast Guard | 46 CFR 56.01-2(e)(26) | ASTM A 333/A 333M | 1994 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service | ASTM International | |
Food and Drug Administration | 21 CFR 172.105(b)(1) | FDA Publication | 1982 | Ultraviolet Assay | Food and Drug Administration, U.S. Department of Health and Human Services | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.446(a) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASME B31.4 | 1998 | Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50 App. H, III, B | ASTM E 185 | 1982 | Standard Practice for Conducting Surveillance Tests for Light-Water Cooled Nuclear Power Reactor Vessels | ASTM International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Aluminum) | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | EPA SW-846-5050 | 1994 | Bomb Preparation Method for Solid Waste, Revision 0 | U.S. Environmental Protection Agency | |
Transportation Security Administration | 49 CFR 1546.209(a)(3) | ASTM F 792 | 1993 | Standard Practice for Design and Use of Ionizing Radiation Equipment for the Detection of Items Prohibited in Controlled Access Areas | ASTM International | |
Food and Drug Administration | 21 CFR 173.115(b)(3) | Food Chemicals Codex | 1996 | Alpha-acetolactate Decarboxylase (?-ALDC) Enzyme Preparation Derived from a Recombinant Bacillus Subtilis | National Academy Press | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 1.7 | ANSI C78.81 | 2003 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 162.060-36 | ISO/IEC 17025:2005/Cor.1:2006(E) | 2006 | General Requirements for the Competence of Testing and Calibration Laboratories, Technical Corrigendum 1 | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (17A) | ASTM D 1253 | 2008 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Heptachlor Epoxide) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2(1)(b)(iv) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.93(b)(1)(iii) | ANSI/ISEA Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
National Highway Traffic Safety Administration | 49 CFR 572.155(h) | Drawing No. SA-572-S24 | 1994 | Pubic force transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation |