This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI A112.14.1 | 1975 | Backflow Valves | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.1450(a)(5) | NVUIC regulations | 1985 | Nevada Administrative Code [NAC], Regulations and Rules of Practice and Procedure adopted Pursuant to NRS 534A, Sections 1 through 69, Inclusive. November 12, 1985 (amending NAC Chapter 534A) | State of Nevada | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D4024 | 2015 | Standard Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges | ASTM International | |
Minerals Management Service | 30 CFR 250.490(j)(13)(ii) | ANSI Z88.2 | 1992 | Respiratory Protection | American National Standards Institute | |
Coast Guard | 46 CFR 125.180(b) | ABYC E-1 | 1972 | Bonding of Direct-Current Systems | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 572.127(g) | Drawing No. 127-3005 | 1994 | Lumbar adapter | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Stirofos) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.269(n)(4) Note | ASTM F855 | 1990 | Standard Specifications for Temporary Grounding Systems to be Used on De-Energized Electric Power Lines and Equipment | ASTM International | |
Coast Guard | 46 CFR 121.200 | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Energy Department | 10 CFR 434.402.4.2.1 | ASHRAE 90.1 | 1989 | Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings with addenda (RS-1) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.137(g) | Drawing No. 880105-450 | 2002 | Lower Torso Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D3972 | 1997 | Standard Test Method for Isotopic Uranium in Water by Radiochemistry | ASTM International | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 1, Mercury | ASTM D6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Federal Aviation Administration | 14 CFR 135.168(F)(1)(i) | TSO-C126 | 1992 | 406 MHz Emergency Locator Transmitter (ELT) | U.S. Department of Transportation | |
Energy Department | 10 CFR 434.701.1 RS-1 | ASHRAE 90.1 | 1989 | Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings with addenda (RS-1) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Federal Highway Administration | 23 CFR 625.4(c)(1) | 23 CFR 635 Subpart D | 2014 | General Materials Requirements | Federal Highway Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (6) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 195.452(h)(4)(i) | ASME B31.4 | 2002 | Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 761.19(a)(8) | ASTM D923 | 1989 | Standard Practices for Sampling Electrical Insulating Liquids | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.942(a)(1)(xii) | NIST DOC FF 1 | 1970 | Standard Test Method for Flammability of Finished Textile Floor Covering Materials (ASTM D2859-76) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 60.285(d)(3) | TAPPI Publication | 1968 | TAPPI Method T624 | Technical Association of the Pulp and Paper Industry | |
Food and Drug Administration | 21 CFR 177.1030(c)(2) | FDA Publication | 2004 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
Energy Department | 10 CFR 431.20(c)(3) | ISO/IEC Guide 25 | 1990 | General requirements for the competence of calibration and testing laboratories | International Organization for Standardization / International Electrotechnical Commission | |
Energy Department | 10 CFR 431.15(b)(1)(iii) | NEMA MG-1 | 1993 | Motors and Generators, Section II, Part 11 | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 160.013-1(a)(1) | FedSpec GGG-A-926 | 1999 | Axes | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F E | 1992 | Fluoride by Complexone Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7740 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1915.153(b)(2) | ANSI Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.061-1(a)(1) | FedSpec CCC-F-451 | 1945 | Flannel, Canton | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 91.15-1 | ABS Publication | 2013 | All ABS Standards | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (75) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/Mass Spectrometric Method | American Public Health Association | |
Coast Guard | 40 CFR 136.3(a) Table IB (32) | ASTM D3559C | 2008 | Standard Test Methods for Lead in Water, Differential Pulse Anodic Stripping Voltammetry | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(Q) | EPA Method 633 | 1993 | Organonitrogen Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (5) | EPA Method 150.1 | 1982 | pH, Electrometric Method | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.84(b) | ASTM C114 | 2009 | Standard Test Methods for Chemical Analysis of Hydraulic Cement | ASTM International | |
National Archives and Records Administration | 36 CFR 1235.46(b)(3) Table | ISO/IEC 15896 | 1999 | Information Technology--Data Interchange on 12.7 mm 208-track Magnetic Tape Cartridges--DLT 5 Format | International Organization for Standardization / International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.170-7(a)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (19) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Rural Utilities Service | 7 CFR 1755.870(a)(8) | UL 1666 | 1991 | Test for Flame Propagation Height of Electrical and Optical Fiber Cables Installed Vertically in Shafts | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 571.213 S10.2.3(a)(1)(v) | ASTM D1056 | 2007 | Standard Specification for Flexible Cellular Materials Sponge or Expanded Rubber | ASTM International | |
Coast Guard | 46 CFR 163.003-11(f) | ASTM D1435 | 1994 | Standard Practice for Outdoor Weathering of Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 4, (3)(d) | ASTM D6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Coast Guard | 46 CFR 182.720(e)(1) | SAE J-1475 | 1968 | Hydraulic Hose Fittings for Marine Applications | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII, Paragraph U-200 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(1) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (2) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Food and Drug Administration | 21 CFR 177.1980(c)(1)(ii) | ASTM D1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.937(a)(1) | ANSI Z124.4 | 1983 | Plastic Water Closet Bowls and Tanks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.2201(b)(1) | TXUIC regulations | 1972 | Texas Water Code, Chapters 26, 27 and 29 (Vernon 1972 and Supp. 1982) | State of Texas | |
Mine Safety and Health Administration | 30 CFR 75.333(e)(3) | ASTM E162 | 1987 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International |