This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63.10042 Bituminous coal | ASTM D388 | 2005 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(78) | ASTM D6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (57) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (molybdenum) | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.485a(d)(1) | ASTM E169 | 1993 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.1 | BHMA A156.19 | 1997 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
Coast Guard | 40 CFR 136.3(a) Table IB (12) | USGS I-1472-85 | 1989 | Metals by Atomic Absorption or ICP | U.S. Geological Survey | |
Minerals Management Service | 30 CFR 250.1920(a) | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1965 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.81(a) | Drawing No. LP 1049-1-through LP1049-54 | 1979 | 9-month old Dummy Components and Parts | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (2) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Federal Communications Commission | 47 CFR 76.640(b)(1)(iv) | ATSC A/65B | 2003 | ATSC Standard: Program and System Information Protocol for Terrestrial Broadcast and Cable (Revision B) | Society of Cable Telecommunications Engineers | |
Coast Guard | 33 CFR 96.430(a)(2)(ii) | ASQ Q9001 | 1994 | Quality Assurance in Design, Development, Production, Installation, and Servicing | American Society for Quality Control | |
Coast Guard | 15 CFR 200.112(b) | NIST SP 250 | 2012 | Calibration and Related Measurement Services of the National Institute of Standards and Technology | National Institute of Standards and Technology, U.S. Department of Commerce | |
Rural Utilities Service | 7 CFR 1755.890(l)(5) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 13.3.1 | EPA SW-846 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Third Edition | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(1) | ASTM A370 | 1968 | Methods and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.3(c) E3 | ASTM A333/A 333M | 1994 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service | ASTM International | |
Rural Utilities Service | 7 CFR 1755.505(a) | RUS Bulletin 1753F-153 (RUS Form 515d) | 2001 | Specifications and Drawings for Service Installations at Customer Access Locations | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 25.01-3(b) | SAE J-1928 | 1989 | Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | APHA Method 4500-O F | 2001 | Oxygen, dissolved, mg/L, Copper Sulfate-Sulfamic Acid Flocculation Modification | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(e)(2) | APHA Method 2540 G | 1998 | Total, Fixed, and Volatile Solids in Solid and Semisolid Samples | American Public Health Association | |
Food and Drug Administration | 21 CFR 178.3910(a)(4)(i)(A) | ASTM D86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(a)(3) | ASTM D6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Federal Reserve System | 12 CFR 1511.2(c) | Uniform Commercial Code | 1994 | Revised Article 8, Investment Securities, (with Conforming and Miscellaneous Amendments to Articles 1,3,4,5,9, and 10) | National Conference of Commissioners on Uniform State Laws | |
Coast Guard | 46 CFR 160.135-7(b)(3)(ii) | ASTM A314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International | |
Environmental Protection Agency | 40 CFR 1048.810(c)(2) | ISO 14230-4 | 2000 | Road vehicles—Diagnostic systems—Keyword Protocol 2000—Part 4: Requirements for emission-related systems | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 1 | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.354(h)(3) | ASME MFC-6M | 1998 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1505.5(h)(2) | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 34 | 2003 | Dipping and Coating Processes Using Flammable or Combustible Liquids | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63.11647(f)(2) | EPA SW-846-7471B | 2007 | Mercury In Solid Or Semisolid Waste (Manual Cold-Vapor Technique), Revision 2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 52.741(a)(4)(i)(B)(3)(v) | ASTM D4457 | 1985 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph | ASTM International | |
Research and Special Programs Administration | 49 CFR 173.336(b) | FedSpec RR-C-901D | 2003 | Cylinders, Compressed Gas: High Pressure, Steel DOT 3AA, and Aluminum Applications | Federal Specifications Standards and Test Methods | |
Coast Guard | 10 CFR 431.294(b)(2) | AHAM HRF-1 | 2004 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(i) | ASTM D86 | 2012 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Rural Utilities Service | 7 CFR 1755.397(k)(4) | FedSpec H28 | 1986 | Screw-Thread Standards for Federal Services including Change Notices 1, 2, and 3 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 111.105-9 | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.77(a)(2)(ii) | Drawing No. SA-572-S2 | 1994 | Type B accelerometer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropanol) | ASTM D3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2400(b)(4) | WAUIC regulations | 1983 | Revised Code of Washington, chapter 78.52 (Bureau of National Affairs, 1983 Laws), entitled, Oil and Gas Conservation | State of Washington | |
Coast Guard | 46 CFR 78.45-1(a)(2) | ASTM Adjunct F1626 | 1996 | Symbols Used in Accordance with Regulation II-2/20 of the 1974 SOLAS Convention as amended PCN: 12-616260-01 | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1806-05(h)(1)(ii) | SAE J-1939-81 | 2003 | Recommended Practice for Serial Control and Communications Vehicle Network--Part 81--Network Management | Society of Automotive Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.26 | IAEA TS-R-1 | 1996 | Regulations for the Safe Transport of Radioactive Material | International Atomic Energy Agency | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 396 | 2013 | Inspection, Repair, and Maintenance | Federal Motor Carrier Safety Administration, Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (98) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM D1253 | 2003 | Standard Test Method for Residual Chlorine in Water | ASTM International |